Disposable gas filter
|
Model F195 disposable in-line filter removes 99.99 percent of unwanted particles from gas flow lines. According to the manufacturer, inside the unit's transparent nylon housing, encapsulated microfiber elements trap 0.1-micron particles. Intended for portable flue gas analyzers as well as other analysis systems, the filter withstands a maximum temperature of 230 degrees Fahrenheit at 0 psig and 120 degrees Fahrenheit at 125 psig. Each unit costs $12.50.
Dwyer Instruments Inc.
Michigan City, IN
(219) 879-8000
Chemical process station
The Microvoid CS-31 chemical process station is used in cleanrooms or under clear air flow hoods. The all-polypropylene construction enhances the unit's corrosion resistance. The modular design includes a segmented work surface for installation of various optional process tanks. Beneath the work surface is a full-length exhausting tub with drain for waste liquid disposal or capture. Base cabinets accommodate storage of standard 2-gallon chemical bottles.
Air Control Inc.
Henderson, NC
(252) 492-2300
HCl purifier
Designed to be installed in the flow train of the company's hydrogen chloride (HCl) bulk specialty gas system, the purifier delivers dry and consistently pure HCl into an electronics manufacturing facility. According to the manufacturer, the degree of dryness of HCl is considered critical to the quality of semiconductor devices, because moisture contamination at low parts-per-million levels in HCl can cause problems in the gas distribution system and in the manufacturing process. With a maximum operating pressure of 2000 psig at 50 degrees Celsius, the purifier is a 28-inch-long-by-4.5-inch-diameter vessel with 0.5-inch VCR inlet and outlet connections.
Air Products and Chemicals Inc.
Allentown, PA
(610) 481-5971
CO2 measurement device
|
Designed for harsh environments, the GMT220 is offered in a watertight and corrosion-free housing. Measurement range for high CO2 concentrations is 0 to 20 percent and low concentrations is 0 to 10,000 ppm. Operating temperature range is -20 degrees Celsius to +60 degrees Celsius and the operating humidity range is 0 to 100 percent RH.
Vaisala Inc.
Woburn, MA
(781) 933-4500
Colored vinyl tile
Colorex electrostatic conductive tile is available in 10 new colors and the static dissipative offers a selection of 16 colors. Sliced from a solid block of molded homogeneous vinyl, virtually any stain can be sanded from the surface and restored to its original finish, according to the manufacturer.
Forbo Industries
Hazleton, PA
(800) 842-7839 or (570) 459-0771
Air dryer
|
The compact design of the Buran compressed air dryer uses R134a refrigerant. With a capacity of 40cfm, all systems are fully UL certified and approved. They are commonly used in the control air industry where clean, dry compressed air is necessary to avoid control failure.
ultrafilter inc.
Norcross, GA
(770) 448-3363
Incubator
|
Series Forma 3110 universal water jacketed incubators have been cleared by the U.S. Food & Drug Administration for IVF use, according to the manufacturer. Categorized as Class II devices, the units include the Forma HEPA filtered airflow system that continually filters the entire chamber volume every minute; the heated, dual-pane inner door that eliminates condensation and provides faster temperature recovery; and the removable inner door gasket that optimizes cleaning. The chamber interior features polished stainless steel, 100 percent covered corners and 54.6 sq. ft. of usable culture space. Units are available with automatic CO2 (IR or TC) and O2 control.
ThermoQuest
Marietta, OH
(740) 373-4763
Sticky mat
The Sole Cleaner is a self-regenerating contamination-control sticky mat that removes particles from shoe soles and equipment as personnel enter the changing room or cleanroom. The product uses infrared beam technology to monitor the number of foot passes made on the mat surface, displaying this amount on an LED readout counter. When the total count exceeds the selected threshold, an indicator light activates and the transport system replaces the sticky film surface of the mat and resets the counter. Each standard 300-foot roll typically yields about 100 surface changes.
Terra Universal Inc.
Anaheim, CA
(714) 526-0100
NIST-traceable thermometer
|
Catalog #83406 thermometer is pre-certified traceable to NIST at 0, 37, 56 and 100 degrees Celsius, observed corrections are expressed to the nearest 0.1 degree Celsius. The 12-inch-long thermometer is ranged from -10 to +110 degrees Celsius in 1-degree divisions and is tested for 76mm immersion. The manufacturer's Permanent Markings (PM) process fuses the graduated lines and numbers directly to the glass. These markings cannot be washed out by exposure to caustic liquids. Each thermometer comes with its NIST-traceable certificate and a cushioned storage case.
Brooklyn Thermometer Co.
Framingdale, NY
(516) 694-7610
Fume hood
The Microvoid FH-45D chemical-resistant fume hood is intended for either the laboratory or the production line. All polypropylene construction provides resistance to corrosion from strong acids, bases and some solvents, while meeting OSHA operator safety requirements, according to the manufacturer. Standard and custom process tanks and accessories are available for installation into the FH-45D. Base cabinetry is standard in this model; however, optional roll-out bottle storage carts or open air return paths are available.
Air Control Inc.
Henderson, NC
(252) 492-9225
CPVC pipe and duct
Corzan CPVC (chlorinated polyvinyl chloride) pipe and duct are recognized under the Factory Mutual 4910 test standard for cleanroom materials. The three criteria for FM4910 are fire propagation, smoke damage and corrosion damage. According to the manufacturer, Corzan is suitable for the manufacture of cleanroom pipe and duct because it features exceptional weldability and is an alternative to flame-retardant polypropylene.
BFGoodrich Company
Cleveland, OH
(216) 447-5000
Static meter
Model 212 precision digital static meter features a chopper stabilized sensor for long-term measurements in both normal and ionized environments, a liquid crystal display and a recorder output jack. According to the manufacturer, the measurement range is 0 to +\-20 kV at a meter-to-object distance of 1 inch. A 3.5-digit LCD meter provides 10V resolution, polarity indication and low battery warning. A locking pushbutton measure/hold switch enables the user to take a measurement and then hold the reading.
Electro-Tech Systems Inc.
Glenside, PA
(215) 887-2196
Water analysis CD-ROM
Version 2 of the CD-ROM “EPA Methods and Guidance for Analysis of Water” provides wastewater and drinking water methods and guidance. The product provides tests for 776 analytes, more than 330 official EPA drinking water and wastewater methods and guidance from more than 50 EPA documents. Each method document includes text, tables, diagrams, flowcharts and figures. Hypertext links provide navigation between the Table of Contents, the list of analytes and the related/recommended methods documents.
Solutions Software Corp.
Enterprise, FL
(407) 321-7912
Static dissipative laminates
|
Static dissipative laminates provide durable work surfaces that are well suited for electronically sensitive applications that are carried out in a range of relative humidity conditions. The work surfaces provide a controlled path to ground for the dissipation of static electricity to protect sensitive parts. A uniform resistance to ground is maintained from any point on the surface. Typical values range from 106 to 109 ohms, measured at 100 volts.
International Paper Co.
Odenton, MD
(410) 778-2184
Purge system
|
The Mini-Z-Purge for Class I and II Division 2 and Mini-Y-Purge for Division 1 explosive atmospheres are available in either back plate or panel mount configurations. According to the manufacturer, back plate Mini-Z & Y-Purge systems are one-half the size of the latest available design and take a quarter of the time to install on the purge panel. The relief valve is also a quarter of the size and weight. The purging systems are used in Class I (Zone 1 & 2) and Class II locations, including pharmaceutical, oil and gas drilling, chemical, refining and food and beverage processing.
Expo-Telektron Safety Systems Inc.
Chagrin Falls, OH
(440) 247-5314
Glove monitoring device
Designed to enhance the safety of standard insulator and barrier devices, the industrial glove monitoring system enables users to test gloves without removing them, in a time-efficient, sanitary and reliable manner. A distribution junction box connects essential hardware components. At the core of the system are the glove electrodes, the test bar assembly and the control, data entry and display unit. Internal/external and one-sided gloves can be used with this system. The system detects defective or punctured gloves by sensing a phase difference between the two surfaces.
Data Medical
Fairfield, NJ
(973) 882-1180
Modular cleanrooms
Modular cleanrooms include legs, ceiling grids and fan filter units, and are constructed of stainless steel. Walls can be soft vinyl, acrylic or stainless steel panels. The filter units withstand washdowns and exposure to corrosive chemicals. Legs and grids are resistant to chipping and provide a particle-free work area in harsh environments.
Purified MicroEnvironments
Miami, FL
(305) 592-1780
Filtration system
High-containment exhaust filtration systems suit applications where exhaust air poses a hazard to the work process, work area or workers. Systems are delivered complete and skid-mounted. Units include bag-in/bag-out filter banks for both HEPA and carbon filters, properly sized blowers, shut off dampers, alarm systems and inline monitors.
Purified MicroEnvironments
Miami, FL
(305) 592-1780
Water system
The Purelab pRO 10 and 20 benchtop reverse osmosis (RO) laboratory water systems provide 10 or 20 liters per hour of Type III quality water. The systems feature an automatic flush procedure, pretreatment packs and a control panel that registers product water quality, operational mode and pretreatment pack status, according to the manufacturer.
United States Filter Corp.
Lowell, MA
(978) 614-7070
Filter housing
|
The Advanta ALI sanitary inline filter housings are intended for pharmaceutical, biotech, biological, food and beverage and process filtration applications. According to the manufacturer, they achieve maximum product recovery due to low hold-up volume, and achieve production of consistent high-quality welds due to automated orbital welding. The housings feature a downward sloping internal contour and low point drain to allow removal of product, CIP solution and steam condensate. The product comes with ISO9001 manufacturing and design certification.
Pall Corp.
Port Washington, NY
(516) 484-3600
Pressure transmitter
|
Series 616W differential pressure transmitters are available in 34 models, half of them with LCD readouts for on-site troubleshooting, and covering factory-calibrated ranges to 0 to 2″ water column and 0 to 100 psid. These CE-approved units, which sense the pressure of air or compatible gases with ±-0.5-percent F.S.O. accuracy, are enclosed in weatherproof, polycarbonate cases, rated IP66/NEMA 4X. The transmitters have barbed, dual-sized pressure connections to accommodate either 1/8-in or 3/16-in rubber or vinyl tubing. Non-LCD models cost $169; LCD models cost $229.
Dwyer Instruments Inc.
Michigan City, IN
(219) 879-8868
Temperature probe assemblies
|
Used for immersion, surface or air measurements in automotive, aerospace, medical industrial and HVAC instrumentation, custom-engineered temperature probe assemblies feature NTC thermistor or platinum sensing technology. The units can achieve thermal time constants of 200 ms and can be encapsulated to withstand hostile and corrosive environments, according to the manufacturer. Depending upon configuration, they are capable of operating at -80 degrees Celsius to +600 degrees Celsius and can achieve interchangeable accuracy to ±-0.05 degrees Celsius. Housings can be made from such materials as stainless steel, brass or copper.
Betatherm Corp.
Shrewsbury, MA
(508) 842-0516
Pouch wipers
|
Klerwipe-CR pouch wipers are used in cleanrooms to clean surfaces, vials and equipment in aseptic environments. Made from low lint, hydroentagled cellulose, the pouch wipers can be supplied with 70 percent isoprophyl alcohol, 70 percent denatured ethanol or a broad-spectrum biocide.
Shield Medicare LTD
Farnham, Surrey
01252 717616
Isolator/glovebox
The isolator/glovebox is used in Class 100 cleanroom operation. It uses raised-floor laminar flow technology with work area filter coverage. Particles generated in the work area are continuously washed away by the unidirectional downward airflow. They are drawn out by negative pressure under the work tray. The work area is further protected by the laminar flow airlock, which maintains a barrier while bringing in and taking out material products.
Purified MicroEnvironments
Miami, FL
(305) 592-1780
Lab liner
|
Scienceware Labmat liners consist of an absorbent upper surface that traps water, dyes, corrosive chemicals and biohazardous and radioactive solutions. The absorbent surface is backed by a flexible polyethylene film, which is non-skid and prevents soak-through of most solutions. The liners are 20 inches wide and are packed in 50-foot rolls.
Bel-Art Products
Pequannock, NJ
(973) 694-0500
Liquid filter cartridges
|
These cartridges extend the upper temperature range of Max-Load cartridge filters to 380 degrees Fahrenheit. The product is constructed of fiberglass or cellulose in a pleat and channel design, offering 32 times more surface area than ordinary high-efficiency cartridges, according to the manufacturer. Users can choose from carbon or stainless steel core and ends for process fluid compatibility.
Ronningen-Petter
Portage, MI
(616) 323-1313
Vacuum oven
Shelf-heated/cooled vacuum ovens are used in pharmaceutical/chemical drying, sensitive part processing, silicone wafer annealing and other applications requiring precise part heat and shelf temperature uniformity, up to 750-degrees Fahrenheit. Shelf heated oven configurations are available to meet a variety of vacuum, heating and cooling specifications. Standard-sized shelves are 11.25 x 26 inches. The systems, which are adaptable for cleanroom use, are electrically heated; however, oil or steam heating is also available. The heat zones are vacuum or vacuum/inert gas compatible.
T-M Vacuum Products Inc.
Cinnaminson, NJ
(856) 829-2000