New Products

Click here to enlarge image

Pick-and-Place System
System A45 is an automatic pick-and-place system designed to handle wafers up to 8-inches with low pick-up force and features an improved ink dot and wafer mapping capability. The system offers wafer mapping, various linear picking patterns, and ink dot recognition using Die Sort Manager controller software. Windows-based programming reportedly allows quick time to production.
Royce Instruments Inc., Napa, Calif.

Click here to enlarge image

Flip Chip Underfill
Loctite 3568 is a reworkable capillary flow underfill formulated for use on polyimide and silicone nitride passivated flip chip, CSP, BGA and µBGA assemblies. The underfill allows flip chips to be replaced after testing determines that a chip is defective. The defective flip chip packages can be removed by heating the package and underfill for one minute at a temperature of 210 to 220°C. The epoxy-based liquid underfill cures in 5 to 15 minutes when exposed to 150 to 165°C temperatures, and can penetrate gaps as small as 1 mil.
Loctite Corp., Rocky Hill, Conn.

Wafer Probe
The DCP-HTR probe is designed to provide parametric capacitance measurements by minimizing position-dependent capacitance variation while reducing the need for frequent C meter nulling. The probe tip design complements the AttoGuard measurement shield, enabling device characterization with high signal integrity to the device-under-test. The probes use the same signal path accessories as the company's existing probe series.
Cascade Microtech, Beaverton, Ore.

3-D Package Analysis
The Turbo Package Analyzer (TPA) characterizes an entire package structure and automatically produces accurate resistance, inductance and capacitance) values. The analyzer is automated for ball grid array and flip chip package types, as well as chip scale packages and system-in-package components. The system also handles arbitrarily shaped power or ground structures, including solid or meshed planes. Its 3-D field solver uses a fast multipole method to analyze complicated packaging and interconnect structures efficiently.
Ansoft Signal Integrity, Pittsburgh, Pa.

Characterization Sub-System
The Laser Diode Characterization Sub-System is a versatile and modular platform used for die and COC testing of laser diodes. The system offers tools to build a laser characterization workstation so yield improvements may be realized earlier in the packaging process. This sub-system includes a precision motorized stage and motion controller needed for electrical probing of the devices as well as a vision system that comprises two sets of orthogonal video imaging systems used for guiding probes to specific locations. A computer and the company's Process Control System software also are included, offering complete multi-tasking control of motion, instrumentation, alignment, metrology and other test functions.
Newport Corp., Irvine, Calif.

Wafer Rotation
A wafer rotation system used during automatic die bonding features integrated vision with a mechanism for theta rotation of the wafer frame assembly to align the die with fixed ejector pins. As the system picks the die from the wafer tape, it vision processes the die and then rotates the wafer to align individual chips and ejector pins. This process is said to increase the number of die that can be used per wafer, resulting in higher yields.
MRSI, North Billerica, Mass.

In-line Plasma System
The XTRAK in-line plasma system is designed for fast, efficient surface activation and cleaning that can process a single substrate or carrier in less than one minute. With single-lane in- and out-feeds, the system is said to be available in a standalone configuration with integrated loaders. The system can be included in an island form-factor to feed a designated line of equipment, including component attach systems, wire bonders and dispense equipment.
March Plasma Systems, a subsidiary of Nordson Corp., Concord, Calif.

Wafer Feeder
New options have been added to the Wafer Feeder from Universal, including 300 mm wafer feeding and die inversion of bumped devices, enabling the feeding of flip chip devices directly from large wafers. The flip chip option allows processing of bumped devices directly from the wafer. The wafer feeder can process flip chip and bare die with the machine setup, enabling semiconductor manufacturers to run multiple processes on the same machine with minimal operator intervention.
Universal, Binghamtom, N.Y.

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

New Products

Click here to enlarge image

Air-handling units
M+W Cleanroom Products is introducing a new generation of air handlers to meet the highest demands in make-up air requirements. The modular SWP series (Sand-Wich Panel) has been developed to provide customized and efficient solutions for high-volume air conditioning. The air handling units of the SWP series feature: AMC (Airborne Molecular Contamination) control; reduced energy consumption by using only optimized and most efficient components at reduced flow rates and pressure drops; a design free of thermal bridges without condensation on exterior surfaces; smooth inside and outside surfaces; extremely low vibration during operation; low energy consumption; reduced transportation volume; easy assembly on construction sites even in confined areas and compact design to fit building contours.

The air-handling units of the SWP series are designed for easy assembly and installation on construction sites. Its lightweight and compact design reduces the transport volume by approximately 60 to 70 percent, resulting in significant savings in costs for long distance and overseas transportation.

The modular design allows users to bring the unit into confined construction sites that are difficult to access.
M+W Zander
Plano, TX
(972) 673-0005

Roller
Self-lubricating Power-Core rollers replace traditional steel cam followers to provide calculated performance characteristics in load-bearing applications where noise, moisture, shock, temperature and extraordinary rail wear present a challenging operating environment. The cam followers are available in a variety of construction materials and design configurations, including stainless steel, shielded, sealed and with specially lubricated bearings that are designed for use in cleanrooms. Single or double bearings are configured, depending on load-handling requirements.
Intech Corporation
Closter, NJ
(201) 767-8066

Duct wrap
Commercial duct wrap is a thermal insulation and is intended for installation on the exterior of rectangular or round sheetmetal ducts and spaces where temperature and condensation must be controlled. The material comprises seven layers: heavy-gauge foil, polyethylene, bubble, polyethylene, bubble, polyethylene and foil. The product reflects 97 percent of the radiant energy striking its surface. The wrap is made of foil and does not provide nesting for birds, rodents or insects. It resists mold and mildew.
Reflectix Inc.
Markleville, IN
(765) 533-4332

Click here to enlarge image

Visor
The Magna Visor from Bausch & Lomb features a molded frame with removable, washable padding. The visor is available with 6-, 8- or 12-inch focal length lenses, which are interchangeable for a variety of work environments.
Sears Industrial
Evanston, IL
(800) 776-8666

Click here to enlarge image

Valve
The balanced, three-way directional valve, which diverts flow between two outlets is intended for positive displacement pump applications because it diverts the pump discharge without deadheading the pump. For pump unloading applications, one of two outlets can go to nozzles and the other back to reservoir. In the reverse direction, it can be used to select either of two inlets. The product is available in sizes from 0.5- to 4-inch pipe. Pressure ranges from 150 PSI to 10,000 PSI. Custom features and materials of construction are available.
The Valv-Trol Company
Stow, OH
(330) 686-2800

Click here to enlarge image

Fabric duct
The Nozzle Series is a high-velocity, energy-saving HVAC duct alternative to metal, fiberglass or polyethylene. The UL and NFPA 90A-1993-approved, round polyester duct offers mechanically clamped thermoplastic nozzles that reportedly provide more concentrated air throws than conventional metal duct/register designs. With an infinite number of nozzle quantities and patterns available, each product is custom CAD designed. Each nozzle's throat design ensures maximum air throw, but at a minimum static pressure, according to the manufacturer.
FabricAir Inc.
Louisville, KY
(502) 493-2210

Click here to enlarge image

Sanitary fittings
The HPS Series 25 BioPharm Fittings comprises clamp fittings and buttweld components designed and manufactured for the biotechnology and pharmaceutical processing industries. They are manufactured to ASME BPE standards with compliant 316L stainless steel with a variety of finishes and according to strict tolerances for ovality, end face squareness, wall thickness and material chemistry. The series includes automatic tube weld ferrules, gaskets, clamps, elbows, tees, cross reducers, end caps and tubing. The product line is designed to be used in any liquid flow process or high-purity utility application where cleanability, sterility, dimensional integrity and materials of construction are critical.
MKS Instruments Inc.
Boulder, CO
(303) 449-9861

Chamber
Stability and photostability chambers are designed to meet ICH guidelines for general stability testing of new drug substances and products Q1A(R), long term and accelerated refrigerated testing and photostability testing. The 10-cu.ft and 30-cu.ft stackable benchtop chambers provide temperature from 5° to 60° Celsius and humidity from 20 percent to 98 percent RH to create repeatable environmental conditions for numerous applications. Standard features include stainless steel interiors, LED temperature and humidity display, audible and visual temperature alarms, stainless steel wire rod shelves and horizontal airflow.
Caron
Marietta, OH
(740) 373-6809

Click here to enlarge image

Safety control system
The BeamSafe III-EP is rated for Class 1, Group C and D explosive environments, the U.S. standard for atmospheres represented by intermittent or continuous presence of ethylene and those presented by propane. The product is housed in a cast aluminum enclosure designed to contain an ignition of explosive gas. The enclosure meets UL886, NEC articles 500, 501 and 502 and CSA.
Scientific Technologies Inc.
Fremont, CA
(510) 608-3400

Click here to enlarge image

Hydrogen monitor
Designed to measure hydrogen concentrations of 500 parts-per-million and below, the hydrogen monitoring system responds to the presence of hydrogen in seconds and is suitable for use in detecting hydrogen as either desired stream constituent or stream contaminant. The system consists of a sensor cell linked to a companion transmitter. The sensor provides accurate hydrogen measurements in both oxygen deficient and 100 percent RH atmospheres, has a three-year operational life and a measurement range from 0 to 500 PPM. Higher and lower measurement ranges are also available. Periodic calibration is required.
PureAire Monitoring Systems Inc.
Rolling Meadows, IL
(847) 788-8000

Purifier
Two models of the wall-mount gas purifier are available, Model I and Model II, both of which are engineered to run hot, enabling them to remove all hydrocarbons (including methane) as well as O2, H2O, CO and CO2 from nitrogen, argon and hydrogen gas streams. No regeneration is required. The products use non-evaporable, zirconium-based getter materials to deliver sub-ppb impurity levels. Both models offer redundant over-temperature protection, an LED digital display, self-checking diagnostics and alarms to warn of high temperature and over-temperature situations.
Johnson Matthey
Wayne, PA
(610) 971-3100

Temperature controller
The CT325 temperature controller measures 1 x 1 x 1.5 inches and can control 240 watts of heating power. The unit is powered from a single DC power supply that provides power to the control electronics as well as the heating element. The miniature design accepts 100 or 1,000 ohm platinum RTD or 50 k-ohm thermistor sensor input. Setpoint and actual temperatures are monitored by connecting a voltmeter to test points. The output temperatures are shown as 10 mV/degrees Celsius outputs.
Minco Products Inc.
Minneapolis, MN
(763) 571-3121

Diaphragm valves
Type 314 high-temperature resistant (HTR) true union diaphragm valve, Type 319-HTR diaphragm valve and the Type 319-HTR zero static valve are constructed from virgin, unpigmented SYGEF PVDF high-purity material with a secondary TFM O-ring. The valves feature a red “snap-on” handwheel for removal and installation, an optional lockable handle and a position indicator. The valves can be pneumatically actuated for automated control.
George Fischer Inc.
Tustin, CA
(714) 731-8800

Tackified wiper
Tackified wipers are effective in wiping dust off of surfaces. These wipers are antistatic and do not contain silicones or solvents. Various types of fabric, sizes and tack levels are available.
High-Tech Conversions Inc.
Enfield, CT
(860) 749-1622

Click here to enlarge image

Fume hood
Protector laboratory hoods have an interior liner made of molded, one-piece, chemical-resistant fiberglass. The hood exterior is glacier white epoxy-coated steel. Features include an ergonomic airfoil with Clean-Sweep airflow slots that allow clean air to continuously flow over the airfoil, creating a constant protective barrier from contaminants. Automatic air by-pass system, pre-set fiberglass baffle and vertical-rising tempered safety glass sash are included. Exterior widths available are 48, 60, 72 and 96 inches with an internal depth of 24 inches.
Labconco Corp.
Kansas City, MO
(816) 333-8811

Click here to enlarge image

EtO sensor
The ethylene oxide (EtO) detector is used in chambers that sterilize pharmaceutical powders, pellets, pills and packages, showing actual EtO concentrations over the entire sterilization cycle. The detector also warns of any troubles in its unit and indicates what is wrong and where. It can be factory installed on new chambers or retrofitted to existing units. It fits flush in a chamber sidewall. The detector can drive remote printers and plotters to make a record of EtO levels.
Sensor Electronics
Minneapolis, MN
(800) 285-3651

Click here to enlarge image

Valve position sensor
The dual inductive, two-wire AC/DC series VPS valve position sensor enables users to maintain VDI/VDE 3845 dimensions for positioner mounting. The corrosion-resistant waterproof plastic housing is intended for wash down requirements. All units are directly mounted to actuators with ISO-NAMUR topworks. The sensor has two independent LEDs and bright flow line indicator that provide local visual indication.
Dwyer Instruments Inc.
Michigan City, IN
(219) 879-8868

Click here to enlarge image

Electrostatic voltmeter
Model 323 performs highly sensitive voltage measurements using a variety of probes with various aperture orientations (side, end) and body types (round, square). It makes noncontacting measurement of electrostatic potentials of 0 to +/-100 V over a range of probe-to-surface distances. User-accessible adjustments compensate for many sensitive testing conditions. A response speed control adjusts the speed/noise tradeoff of the AC response, while a drift/spacing null adjustment minimizes the variation in zero offset voltage as the probe-to-test surface spacing changes.
TREK Inc.
Medina, NY
(585) 798-3140

Light fixture
The VSL and VSLC series housings are made of heavy-duty 16-guage cold-rolled steel. Ballast and lamp holders are installed to the ballast cover to facilitate installation and service. The ballast cover includes safety chains. The lenses are made of clear prismatic, injection-molded and UV-stabilized, 0.130-inch polycarbonate that completely encloses the face and all sides of the housing. The series is UL listed for wet locations and CSA certified. The VSL is 9.25-inches wide and comes in two- and three-lamp configurations. The VSLC is 5 3/8-inches wide and comes with one lamp. Both are available in two- and four-foot lengths.
Lithonia Lighting
Atlanta, GA
(404) 853-1400

Magnetic drive pump
Model NH-PX series brushless DC pump series features an all-inert pump housing and impeller with typical wetted materials of glass-filled polypropylene, PVDF or ETFE. Live expectancy is in excess of 10,000 maintenance-free hours. Pumps with brushless DC drives are available in many flow and pressure ranges with free flows up to 30 lpm and maximum head pressures to 16 feet of water. Higher-capacity pumps are available in AC drive configurations. Connection options include hose barbs or male NPT up to one inch, dependent on pump model and flow capacity.
Clark Solutions
Hudson, MA
(978) 568-3400

Click here to enlarge image

Air-filter media
UL-recognized Quadrafoam air-filter media is designed for forced air cooling in medical electronics enclosures. The open cell polyurethane foam media is treated with a next-generation flame-retardant coating. The special thin-layer coating results in a more flexible and resilient filter media that is effective in medical applications requiring resistance to solvents and high-temperature/high-humidity conditions. The coated foam contains an antimicrobial additive with a fungus growth rating of zero. The product is non-hazardous and pH neutralized for longer filter life.
Universal Air Filter
Sauget, IL
(618) 271-7300

Click here to enlarge image

Autoloading system
The Hull Flex Autoloader offers guides that are interchangeable without hand tools for accumulation and queuing of vials and containers; internal loading and unloading electronically synchronized with movement of the freeze dryer shelf assembly; monitoring of vials and containers during the entire processing operation and anti-jam sensors that ensure smooth, continual operation. According to the manufacturer, the product was designed with barrier isolation technology in mind and is intended for cleanroom settings. The system eliminates trays, occupies a narrow footprint and can load at speeds of more than 600 vials per minute.
Hull Company
Hatboro, PA
(800) 523-2327

Click here to enlarge image

On-line certificates of analysis
Certificates On Line provides Internet access to certificates of analysis for specific microbiology products. Customers can register on the company's Web site at www.bd.com/regdocs and enter the product catalog numbers and lot numbers to request certificates of analysis for the available product lines. This free, automated service allows for batch requests from the customer. After the system retrieves requested certificates, customers have the option of e-mailing them to others, printing or downloading the files.
BD Diagnostic Systems
Sparks, MD
(800) 343-2655

RH-plus analyzer
The rh-plus MR 2350 is a relative humidity analyzer for measurement and control of moisture levels in gases. An optional input permits external sensors from pressure compensation, temperature or other parameters. Its two-line LCD display and membrane-type push-buttons control unit selection, ranges, set points and special functions. The Model MR 2350 is available in wall- and panel-mount configurations and when used with the company's MDR3 humidity probe, is capable of rh readings in the range of 0-100 percent over a temperature range of -15°C to +85°C. The analyzer is approved for use in hazardous areas by Cenelec and FM when used with approved Zener barriers. Applications include cleanrooms, food/pharmaceutical processing and storage, ETO sterilizers, medical air and refrigerant dryers, heat treating and leak testing.
General Eastern Instruments
Woburn, MA
(800) 225-3208

Cutting package
The Handy Plasma 550 is a portable cutting package that can travel to any job and provide good cutting performance. Weighing 35 lbs, the product offers 35 amps of cutting power at 40 percent duty cycle to cut 1/2-inch material and sever 5/8 inch. Output is adjustable to allow the operator to tailor the current for the material to be cut. With the power line conditioner, the unit can operate off auxiliary power sources and handle poor power lines without damage. The Handy Plasma 440 uses the company's PT-31 torch, designed for operator comfort, with an extended shape that provides good workpiece visibility. Drag or standoff cutting and a template-following feature that duplicates curves or straight lines contribute to the operation of the machines.
ESAB Welding & Cutting Products
Florence, SC
(843) 669-4411

Airborne particle counter
The APC-2 is designed for use in a multi-point monitoring system to monitor airborne particles in cleanrooms and minienvironments. It features a built-in vacuum source, network capability and compact size to simplify the implementation of a computer-controlled continuous sampling system. The product communicates via RS-485 or RS-232 to RPMonitor facility-monitoring software.
ARTI
Grants Pass, OR
(541) 472-0190

Test fixture kit
The test fixture kit includes three discs with calibrated orifices of the user's choice (above five microns). It also includes a 1/8-inch NPT female adaptor on both ends. The kit is used to test flow rates for gaskets for pressures up to 200 psi wherever gas or liquid flow control is required, such as critical flow, pressure reduction, particle separation, injection mixing, vacuum and micro-decay. The product allows testing without destroying gaskets or orifices. The gasket is held in place within the fixture while the fixture is inserted or removed from the line.
Lenox Laser
Glen Arm, MD
(410) 592-3106

Gas generator
The Clarus L hydrogen peroxide gas generator is a compact, mobile unit that can be used throughout a building for the bio-decontamination of various equipment found in microbiology, biosciences and life sciences laboratories. It uses pre-dispensed cartridges of hydrogen peroxide, so that operators are not exposed to the liquid. Optional items include a barcode reader, printer, communications port and gas sensor.
Bioquell Pharma
Andover, Hampshire, UK
(44) 01264 835853

Motor
The STM series motor provides high-resolution motion control for linear or rotary devices. It is intended for motion in the few-nanometer range and can operate at 250mm/sec. The motor provides 1N of force and 1N of static holding capability.
Nanomotion Inc.
Ronkonkoma, NY
(800) 821-6266

Power vacuum
According to the company, the CFM 137 vacuum picks up the finest dust and flour from processing equipment, ovens and floors. It is built for a maximum suction power and filtering efficiency to protect food from contamination. Captured liquid and/or dry particles and scraps travel through the cleaner's multi-grade HEPA filtration system, which retains up to 99.999 percent of particles down to 0.3 micron. Using a series of finer filters, the system captures smaller particles as they move through the vacuum, exhausting pure air into the cleanroom or manufacturing environment. An optional stainless steel design is available. The CFM 137 also features a trolley for maneuverability; three bypass motors to eliminate the burnout caused by clogging; a 16-gallon capacity removable, wheeled container for disposal; and the option for a 26-gallon container for increased productivity.
Nilfisk-Advance America Inc.
Malvern, PA
(610) 647-6420

Glovebox for mail
The MailShelter is designed for use in mailrooms and postal facilities where mail opening and slitting occurs. It protects a mail handler from harmful airborne particles while processing the mail. This is achieved by maintaining negative pressure in the glovebox throughout the process. Negative pressure ensures that any airborne matter is drawn into a high-efficiency filter bank before it can escape the glovebox. The filter bank in the MailShelter is equipped with an American Filter Perfect Pleat Premium HM prefilter and a tested and certified AmericalAirFilter AstroCel I HEPA final filter. This filter combination is greater than 99.99 percent effective in capturing 1- to 5-micron airborne particles, such as anthrax. Once captured, the airborne matter is encapsulated in the filters. Proper disposal of contaminated filers in accordance with established procedures is required to maintain encapsulation. MailShelters can be sized for most mail-handling applications and require no special installation or assembly. Standard models operate using 15-amp, 120-V outlets.
AAF International
Louisville, KY
(502) 637-0326

Click here to enlarge image

Heavy-duty fume arms
Four-, six- and eight-inch diameter standard or stainless steel range extractor arms provide a non-corrosive, adjustable means by which to extract hazardous materials such as welding smoke, dusts, pharmaceutical dusts and acid or caustic chemicals. Benefits include acid resistance and washability. The fume arms have no encumbrances inside them, which allows for clear and free movement of contaminate air and eliminates the possibility of residue buildup. All of the adjustments for the settings of the arm are accessed from outside. Units come in standard production models with or without fans and filters or may be customized.
OsKar Antipollution Inc.
Montreal, Quebec
(877) 466-7527

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.