For immediate response go to www.onlinecenter.to/cr and request information by inquiry number, advertiser or by product code.
Datalogger kits are appropriate when continuous monitoring and documentation of temperature and/or humidity are critical. The dataloggers in combination with Evaluation software meet the following U.S. Food & Drug Administration requirements: cGLP: 21 CFR Part 58; Software Validation: 21 CFR Part 820 (820.70(i); and Electronic Records: 21 CFR Part 11. Nine kits are offered for use with a range of laboratory equipment, including incubators, freezers, blood bank equipment, and cryopreservation equipment. Tempera ture and humidity conditions are measured, stored and displayed and alarm conditions are recorded.
Circle No. 200
Each eductor scrubber is custom-engineered to meet specific performance requirements. It is easily staged with other collection devices such as impingement plate scrubbers or packed towers. Where extremely high efficien-cies are required, eductor scrubbers can be arranged in series. Eductor scrubbers and separations are available to handle gas flows up to 10,000 CFM. The high liquid flow rate makes the product particularly appropriate for the collection of sticky and gummy particles as well as gases that decompose upon contact with water.
Circle No. 201
Designed for hard-to-reach places, the ready-to-use sterile pack swabs for industrial uses can fit easily into equipment recesses, nooks and crevices. Extra measures have been taken to ensure the highest levels of sterility for environmental monitoring. The swabs have a sterility assurance level of 10-6, making them appropriate for the sterility requirements of surface sampling in cleanrooms and isolators in pharmaceutical and medical device manufacturing facilities. The swabs are double wrapped, gamma irradiated and performance validated after exposure to the vaporized hydrogen peroxide atmosphere used during isolator facility decontamination cycles.
BD Diagnostic Systems
Circle No. 202
Conductive tray carts
Conductive tray carts store and transport printed circuit boards safely and easily on 26 x 20-inch ESD trays with ESD protective mats. A locking safety arm at each end keeps the trays securely in place. Two heights are available. The 46-inch model provides capacity for 20 trays, while the 64-inch model stores 30 trays. The optional rigid dissipative trays protect circuit boards from flexing and provide maximum weight capacity of 25 pounds. The carts handle 425 pounds each.
Production Systems Group
Circle No. 203
The Lift Station Well Washer is a safer alternative to manually entering and removing oil and grease residues built-up inside lift station wells. The product acts to disperse grease and oil and prevent accumulation within the wastewater collection system. Through automated rotating spray nozzles, clean water is propelled at high velocity to wash away floatable grease, oil and fat.
Circle No. 204
Pirvol is a point-infrared volumetric combustible gas monitor that measures hydrocarbon in the range of 0 to 100 percent by volume. Ideally suited to oil and gas wellhead mud-logging, hydrocarbon processing and a variety of other extractive sampling applications, the instrument is CSA approved for Class 1, Division 1 groups B, C and D and Division 2 groups A, B, C and D (T3C) hazardous areas, and it conforms to EN50081-1 and EN50082-1 standards. The device has a five-year warranty and is supplied with sapphire optics for industrial-grade hardness.
Circle No. 205
Nitrogen gas generator
Maxigas uses a carbon molecular sieve to separate the oxygen from compressed air to provide high-purity nitrogen alone. This compact system enables users to generate clean, dry nitrogen where it is wanted, avoiding the need for supplies from high-pressure cylinders or cyrogenic tanks.
Circle No. 206
Disposable capsule filter
Kleenpak Nova capsule filters have a t-style inlet/outlet configuration, which is appropriate for manifolding multiple filters in a series or parallel configuration. The filters can be configured with 10-, 20- or 30-inch length standard Pall cartridge filters with a variety of proprietary membrane filters. The capsules are expressly designed for pilot and process scale applications requiring sterilization by gamma irradiation of filter capsules pre-connected to bags, tubing, containers or other process equipment and can be used for critical filtration applications such as the sterilization of biopharmaceuticals, biologicals, diagnostic reagents, serum, tissue culture media and culture media components.
Port Washington, NY
Circle No. 207
The Easy Clean Slip-Torque conveyor is engineered to reduce the surfaces where contaminants can collect and facilitates thorough cleaning. It has USDA, BISSC and National Sanitation Foundation criteria incorporated in its design and construction. Built from a bolt-together stainless-steel frame with 45-degree steel strength bends, the systems features easy-to-clean, food compatible, solid faced, loose fit rollers. It has no return loop, which lowers the chances of carrying contamination throughout the system.
Circle No. 208
AirClean laminar-flow workstation is recommended for any ISO Class 5 requirement that does not produce by-products that can contaminate the worker or production area. The workstation is offered in both vertical- and horizontal-flow versions. The product includes 90 fpm air velocity, HEPA filters to capture 0.3-micron particles, easy-access pre-filters, magnehelic gauge to monitor static air pressure, fluorescent lighting and cleanroom-sealed work surfaces. Fans are centrifugal, direct-drive with static capacity up to 1.2 inches W.G. at rated flow and are mounted on rubber isolators for smooth, quiet operation. A variable speed control enables users to adjust airflow. Workstations are available in overall lengths of 49.5 inches to 97.5 inches with work surface depths of 24, 30 or 36 inches.
Circle No. 209
Modular air filters
The air filters are designed to be added to or reduced in size for whatever change a facility is going through. Each filter is supplied with a venturi-assisted reverse pulse cleaning system with air tank. It can be used in a variety of applications such as welding smoke, dry dusts and pharmaceutical dusts. All modules come in standard production models with or without fans and filters or may be customized to suite a specific application. A direct-drive fan can be mounted on top of the module.
OsKar Antipollution Inc.
Circle No. 210
The LCC2-14 is a 14-cubic-foot pass-through depyrogenation and sterilization oven that enables life science companies to consistently replicate their processes from R&D to clinical trials to small-scale production. It complies with cGMP guidelines and promises to accelerate development to production cycles. Featuring a stainless-steel exterior and interior, the oven maintains ISO Class 5 conditions throughout the processing cycle, and its operating temperature is rated up to 500 degrees Fahrenheit. The oven's horizontally recirculating airflow is 100 percent HEPA filtered.
Circle No 211
A new armrest, supplied on many ergonomic chair models from the company, replaces the knob for armrest height adjustment with a finger-activated control that is easier to use. Instead of the twisting motion required to turn the knob, a seated chair user uses fingertips to activate a control located immediately under the armrest's pad. The armrest has a height-adjustment range of 3.25 inches. The new armrest pad is 9 7/8 inches long and provides greater pad surface.
BioFit Engineered Products
Circle No. 212
GcA line of polyester glove liners are made with 100 percent continuous filament, knitted polyester for maximum softness, comfort and protection during extended periods of use in critical environments. BCR half-finger glove liners provide comfort without sacrificing tactile use of fingertips. They also protect hands from excessive perspiration and skin irritation. The BCR full-finger glove liners are a full-finger design manufactured to provide total protection for the most sensitive glove users from the irritation aused by latex and PVC gloves. BCR heavy weight full finger gloves are designed for wear in temperature-controlled areas, providing protection, comfort and insulation in extreme conditions.
Great Barrington, MA
Circle No. 213
Three high-performance under-counter, laboratory glassware washers/dryers clean and disinfect glassware to meet a variety of lab requirements. Available units include a compact model with peristaltic pumps, side storage for cleaning liquids and filtered forced air drying. All units feature a durable 316L stainless-steel interior, triple filter protection on the drain pump, a powerful and easy-to-use control system with 20-character display, 30 user-definable programs and a three-button program selection. Both washing levels can be fitted with spindle racks, and the top level accommodates glassware up to nine inches in height.
Circle No. 214
The DC Mode of motor operation is capable of yielding discrete moves of one nanometer. The methodology combines the standard resonant mode for long travel and high speed with the non-resonant mode. Once in position, the non-resonant mode can be enabled to generate a move from 1nm to 300nm for ultra-fine positioning.
Circle No. 215
All-N-1 is a disposable, self-contained soap system that includes the dispenser and soap unit. As soap is depleted, maintenance professionals discard the unit, which is recyclable, and install a new one. The system is made of durable high-density polyethylene plastic. It is available in white or black. A see-through back window helps the maintenance staff see when it is time to change the unit. This minimizes soap waste, improves cost in use and reduces labor time. The unit is available in 2.5L dispensers.
Circle No. 216
The Mille Luce Model 1000 fiber-optic illuminator is designed to withstand the rigors of virtually all microscopy and machine vision system applications, including assembly, inspection and medical laboratory analysis. A high-impact, polymer housing protects the internal components, which use state-of-the-art mechanical engineering principles to provide cooler surface temperatures along with minimal fan vibration and noise. A slide potentiometer enables the user to adjust lamp intensity from 0 to 100 percent, and optional iris dimming is available when a constant color temperature is required.
Circle No. 217
SleeveSeal, a conformable polyethylene tape, is used to ensure an effective seal between the glove and garment in cleanroom gowning. Perforations at three-inch intervals enable the user to bind and tear at optimum length to secure the glove. The low-outgassing polyethylene film leaves no adhesive residue. The tape is wound on a three-inch plastic core with no liner. It is available white in two- and three-inch widths. The 18-yard roll will seal approximately 42 gloves.
Circle No. 218
The rugged, handheld UPS III loop calibrator is HART compatible and CE compliant to EN61326-1, which meets the demand standards for heavy industrial use. Measure source range is 0 to 24mA. In addition, 0 to 60Vdc can be measured for loop diagnostics and voltage output instrument maintenance. A broad range of specific time-saving features are enabled by advanced microprocessor-based electronics and a large menu-driven graphic display.
New Fairfield, CT
Circle No. 219
CiDecon ST is a sterile concentrated phenolic disinfectant, which is individually double-bagged and gamma-irradiated before undergoing a 14-day sterility test. Each case is shipped with a lot-specific document detailing QC, irradiation and sterility testing. The product is bactericidal, virucidal, fungicidal and effective against TB, HIV-1 and more. It can be used as a broad-spectrum disinfectant on surfaces such as benches, floors and walls. The disinfectant meets OSHA Blood Borne Pathogen Standard and is EPA registered.
Decon Labs Inc.
Bryn Mawr, PA
Circle No. 220
Cable Clean Degreaser is a high-voltage splice cleaner that contains no chlorinated solvents. It removes grease, oil, wax, dirt, silicone lubricants and other contaminants. It also helps current leakage, excessive resistance, reduced performance and arcing at splice and terminations and other problems that these contaminants can cause. The product evaporates quickly and leaves no residue. It is offered in 20-oz aerosol, 16-oz non-aerosol, 1-gallon bottle and 5-gallon pail containers.
CRC Industries Inc.
Circle No. 221
The Series BDL Button Data Logger is 17 mm in diameter and 6 mm thick, is able to record data for one year. The unit is housed in a stainless-steel case and is water resistant. The operating temperature range is from -4 to 185 degrees Fahrenheit. Each unit is powered by a 3V Lithium battery. Sensor accuracy is specified as +/- -0.9 degrees Fahrenheit from 32 to 158 degrees Fahrenheit and clock accuracy is specified as +/-2 seconds per month.
Dwyer Instruments Inc.
Michigan City, IN
Circle No. 222
Low pressure monitor
Echoline provides remote or point-of-use low pressure monitoring of gas cabinet exhaust systems during semiconductor manufacturing processes. A Maintenance Mode feature prevents false trips during ventilation system balancing and simplifies reset after maintenance. It is designed to conform to S2-0200 and CE EN61326 EMI requirements. The compact unit features a bright LED display that flashes to alert the user to an out-of-limit condition.
Precision Sensors Division
Circle No. 223