|
Pipe and fittings
Flo Thread products are available in schedule 80 thickness. Pipe and fittings are joined with a threaded design. Flo Fuse products can withstand pressures up to 200 psi. Pipe and fittings are joined using a socket fusion process. The products are molded from red PVFD resin. Both are available in 1/2-, 3/4-, 1-, 1.5- and 2-inch sizes.
Flo Safe Inc.
Waukesha, WI
(800) 517-2002
|
Cleaning kit
The kit includes air bulb, bucket, brush and 100 sterile storage bags with seals and features a 32-oz liquid concentrate soap. The liquid is EPA registered and dilutes 5 ounces to 1 gallon. The 17-quart bucket is two sided for cleaning separation and has a carry handle. The disposable storage bags are 21 ' 11 ' 8 inches with a zip lock seal.
Allegro Industries
Garden Grove, CA
(800) 622-3530
|
CO2 & temperature monitor
The CEA 700 is a handheld, compact, continuous carbon dioxide gas monitor with temperature readout in either degrees Fahrenheit or degrees Celsius. According to the manufacturer, the unit is durable, reliable and easy to use and maintain. Each unit is equipped with a large digital display, AC power adapter, flip out stand and operational manual. Standard alkaline batteries last up to 80 hours for portable use.
CEA Instruments Inc.
Emerson, NJ
(201) 967-5660
|
Mop
Mop 4 is made of 100 percent knitted laundered polyester, which features a looped-end fantail construction and is edgeless to minimize particle generation. Laundered and packaged in a Class 10 cleanroom, the mop is clean, durable and absorbent, according to the manufacturer. Other mopping components include the bucket, wringer and mop handle, which are all stainless steel and can be sterilized by beta, gamma or steam.
Berkshire
Great Barrington, MA
(413) 528-2602
Media cassette
M Air T media cassettes are available in Sabouraud dextrose agar for quick, easy and accurate detection of yeast and mold in critical areas. The cassettes are pre-filled, sterile and easy to load, with no risk of contamination. Cassette design allows consistent particle size impaction and ensures reliable nutrition capability. The uniform filling level and flat surface enable the user to sample the same volume of air every time, up to one cubic meter per test.
Millipore
Bedford, MA
(781) 533-8562
|
Resin
Kynar Flex 3120-WR is a new grade of Kynar Flex PVDF resin that was developed for rotomolded components used in chemical handling and high-purity applications. According to the manufacturer, it has excellent impact resistance from room temperature to below 0 degrees Celsius and is easily molded at temperature below 315 degrees Celsius on conventional tooling. Its melting point is 160 degrees Celsius.
Atofina Chemicals Inc.
Philadelphia, PA
(800) 581-6883
Static level monitor
Model 624 multi-channel static level monitoring system warns of excessive static charge build-up in manufacturing and handling processes. This autoranging system will automatically switch measurement ranges between 500 to 5000 volts and 5 kV to 50 kV at two inches. The system consists of a control unit housed in an ABS enclosure with a clear polycarbonate cover, which is gasketed to provide sealing up to NEMA 12/13. The chopper-stabilized sensor is housed in a cast aluminum elbow housing and is connected to the control unit by means of a 20-foot cable.
Electro-Tech Systems Inc.
Glenside, PA
(215) 887-2196
Wet chemistry heater
A new acid heating system in Trilennium wet cleaners and processors increases both heating capacity and control capability. Heaters can be configured for flows from 100 ml/minute to 2 l/minute. Trilennium cleaners and etch processors handle wafers up to 300 mm. Heaters feature closed-loop control with set point and over-temperature limits. Optimal control technique software ensures rapid response with no overshoot.
Solid State Equipment Corp.
Philadelphia, PA
(215) 328-0700
Thermoplastic polyimide
TP-8005 is a thermoplastic polyimide used to create high-performance parts. It offers finished parts and shapes with geometric flexibility and the opportunity to improve the function and cost of mechanical design. According to the manufacturer, it offers greater durability, plasma and temperature resistance, greater design freedom and enables engineers to replace less-durable metal and ceramic parts with plastics in semiconductor manufacturing.
DuPont Vespel Parts and Shapes
Newark, DE
(302) 733-8310
|
Anemometer
The Kestrel 3000 pocket wind and humidity meter is intended for HVAC and OSHA related measurements of air velocity and relative humidity. It offers three operating modes: air velocity, average air velocity and maximum air velocity. Measurements can be displayed in feet per minute, miles per hour, knots, meters per second or kilometers per hour. It has an accuracy of +1/-3 percent of reading for wind speed, +1/-1 degree Celsius for temperature and +1/-3 percent for relative humidity.
E. Clark & Associates
Clinton, MA
(800) 253-2497
SMIF pod opener
The SMIF EZ 200mm SMIF pod opener utilizes a single, centrally mounted lead screw, has smooth motion and eliminates the binding possible in dual-screw/motor designs. The product also features adjustment-free pod lock mechanisms, an optimized stepper motor drive and a modular build design.
Adept Technology Inc.
San Jose, CA
(408) 434-5021
|
Mini-chamber
Model 504 mini-chamber has external dimensions of 24 ' 24 ' 18 in and is intended for use where a controlled environment is required but space is limited. Features include a 32 CFM circulating fan, accordion-style sleeve with replaceable gloves, 1.5-inch diameter cable pass-through and 12 ' 12 inch door.
Electro-Tech Systems Inc.
Glenside, PA
(215) 887-2196
Hand lotion
Enriched with aloe vera and vitamins A, D and E, this non-acidic lotion promotes softer, healthier hands and nails. Because it is static dissipative, I.C. Hand Lotion helps in keeping skin moist for better contact between the wrist strap and skin. The product is non-contaminating and contains no glycerin, miner oil, silicones or lanolin. It is completely non-greasy and absorbs immediately. According to the manufacturer, the product helps to meet requirements for ESD-TR20-2000.
R&R Lotion Inc.
Scottsdale, AZ
(480) 443-9255
|
ESD floor plan
By matching ESD Carpet Tile, FlexFloor, Polymeric Flooring or ESD vinyl tile with specific areas, the company can customize a Total ESD Floor Plan for any facility. ESD Carpet Tile is designed specifically for electronics manufacturing and assembly environments. It absorbs 10 times the noise of a hard surface floor. When used in conjunction with ESD Carpet, ESD FlexFloor creates a modular floor system that allows complete flexibility. It is constructed of recycled rubber and withstands chemical spillage from applications such as surface mount and wave solder. The ESD Quartz Series 9000 polymeric flooring is intended for areas with motorized traffic.
United Technical Products
Norwood, MA
(781) 255-1155
Hydrophobic cartridge filter
Aerex 2 filters provide high flow rates at low pressure differentials. Designed to remove bacteria and viruses from moist gas streams, these filters are suited for use in industrial fermentation applications. They are manufactured using PTFE membrane and are 100 percent integrity tested. Each filter lot must pass rigorous stress testing before release, according to the manufacturer. The filters are available in three packs, in 10-, 20- and 30-inch lengths.
Millipore
Bedford, MA
(781) 533-2897
Door guide
The “Authoritative Guide to High-Speed Doors” is designed to support high-speed door purchasing decisions. It provides information on how to choose the right door for your application as well as answers questions associated with door speed, maintenance, controllers and safety. The guide details the differences between rolling and folding doors, the benefits of high-speed operation in saving energy and maintenance dollars and offers a quick look at the features and specifications of the most popular models available today.
Rytec Corp.
Jackson, WI
(262) 677-9046
Air filter
The OdorGuard ring panel air filters are intended for use in HVAC systems and air cleaners. The ring panel filters contain granular activated carbon to remove odors as well as gaseous and particle pollutants and are available in sizes for light to heavy-duty odor removal. The filter is made using patented D-Mark Carbon Web filter media, which adsorbs odor and pollutant molecules while offering low resistance to air flow. Ring panels are available with granular carbon loadings of 45, 300 or 345 grams per square foot.
D-Mark Inc.
Chesterfield, MI
(810) 949-3610
|
Bench mat
The Cleanroom Bench Mat is a non-slip, static dissipative product that addresses the need to prevent movement and loss of small items or control vibration, while offering a secure, cushioned work surface. Approved for use in every level cleanroom, the mat is non-particulating, non-outgassing and silicone and DOP free. The mat is available in black or gray, as a 24 ' 18-inch mat or in a 24-inch ' 40-foot roll.
Dycem Ltd.
Warwick, RI
(401) 738-4420
Facility monitoring system
The Facility Monitoring Data Acquisition System interfaces to the company's DART2 (Data Acquisition Remote Terminal) designed for sensor interface to temperature, humidity, air pressure differential, particle, vibration and other environmental sensors. The hardware/software system expands the company's multiplexing data acquisition software system for storage of facility and equipment ESC performance data over time.
Novx Corp.
San Jose, CA
(408) 998-5555
ESD workstations
Electrostatic dissipative Workstation Systems have static dissipative tops and shelves that are certified to meet specific electrical property requirements ensuring static dissipation at a safe rate. Tops and shelves have ground bolts with a 12-foot grounding cord ensuring contact for proper grounding. The workstations can be configured into a variety of heights and lengths, with cabinet bases or legs. ESD drawer storage cabinets can serve as bases or pedestals for the workstations.
Lista International Corp.
Holliston, MA
(800) 722-3020
|
Air flow modeler
The Reverse Tracer feature in the company's Flovent air flow modeling software for building services engineers and architects simplifies identifying the source of contamination in new and existing cleanroom designs. The new function enables the user to specify an area of contamination and determine the exact location from which the contamination springs. Once this location has been determined, it is then possible to run a series of design scenarios to determine the best way to eliminate this source using another new feature, Command Center.
Flomerics Inc.
Southborough, MA
(508) 357-2012
Tape
Two permanent/strippable, acrylic acid-free, ultra-low-outgassing bonding tapes have been added to the ARclean line of electronically clean products. The DEV-8968 and DEV-8969 both have a permanent adhesive on one side and a cleanly strippable adhesive on the other side. The permanent low-outgassing adhesive is exposed upon removing the clear or white polyester release liners. DEV-8968 has a 2-mil clear polyester film carrier and the DEV-8969 has a 2-mil white polyester film carrier. The thicker carriers allow for easier dispensing during manufacturing.
Adhesives Research Inc.
Glen Rock, PA
(717) 235-7979