|
Minienvironment monitor
Designed for monitoring inside minievnironments to detect particle events, MiniNet uses an ensemble manifold that simultaneously samples particles from seven locations. It can be located either inside or outside of the minienvironment. Samples are taken using either house vacuum or an optional internal pump. Particle information, differential air pressure and two other critical factors (such as air flow velocity or ESD) are transmitted via a single Ethernet signal to FacilityNet facility-monitoring software.
Particle Measuring Systems
Boulder, CO
(303) 443-7100
|
Clean process oven
The LCC1-51 stackable clean process oven features a 5.1-cubic-foot chamber to handle processing applications for both 200-mm and 300-mm wafers as well as larger parts and bigger loads. The chamber features a non-corrosive stainless steel interior and continuously welded seams on the insulation side. The recirculated airflow is 100 percent HEPA filtered. A Magnehelic gauge monitors the HEPA filter pressure drop. The oven is SEMI S2 and CE compliant and utilizes the programmable, microprocessor-based Protocol Plus controller.
Despatch Industries
Minneapolis, MN
(612) 781-5363
|
Washable ESD sheet
X5135 is constructed of a high-impact polystyrene core, which is co-extruded with a Stat-Rite polymer alloy for durable ESD protection on the surface. The sheet is clean enough for all electronic components and assemblies. According to the company, the Stat-Rite surface layer emits extremely low ionic, off-gassing and particulation levels, minimizing the potential for corrosion. The surface layer will not wear off as the sheet is handled or washed, even with harsh alcohol washes.
Noveon Inc.
Cleveland, OH
(216) 447-6374
Glassware washer
Reliance 200 and 250 glassware washers are intended for pharmaceutical research, biotechnology and biopharmaceutical applications. The 200 is a premium under-counter model with industrial-strength cleaning capabilities. The 250 is a small cabinet model that offers a storage compartment below the wash chamber for accessories and detergent containers. Both have a premium 316L stainless-steel wash chamber. Their microprocessor controls offer three pre-programmed cycles for light, medium and heavy cleaning, as well as three programmable cycles for specific application to individual laboratories.
Steris Corp.
Mentor, OH
(440) 354-2600
Cleanroom automation
Class MCS v5.0 controls automated material handling system hardware, enabling users to manage automated material movement in a semiconductor manufacturing cleanroom environment. This version addresses requirements such as interbay and intrabay material movement, dynamic configuration, ease of use and administration and open architecture. It includes an associated MCS development kit and a standard FactoryWorks MES interface. Enhancements include additional AMHS vendor interfaces, a notification server, support of bi-directional ports and expanded anomaly handling.
Brooks Automation Inc.
Chelmsford, MA
(978) 262-5855
|
Static monitor
The 790 static monitor measures the voltage potential on a person referenced to earth ground. An operator inserts a dual conductor ground cord into one of the input jacks located on the monitor. A slide switch is used to select the voltage level necessary for the specific job being performed. Three visible and audible alarms identify existing conditions: exceeding voltage level set limit, loss of contact between arm and wristband or monitor disconnected from ground.
3M Electronic Handling and Protection Division
Austin, TX
(800) 328-1368
|
Coveralls
KleenGuard Extra Coveralls are made with the patented MicroForce technology and provide particle barrier for particles down to 2.0 micrometers in size. Reportedly, they are 25 times more breathable than garments made with New Tyvek. The coveralls are available in white in hooded and nonhooded versions. They feature a zipper front with elastic back, wrists and ankles. Sizes range from medium to 4XL.
Kimberly-Clark Corp.
Roswell, GA
(770) 587-8000
Clean carbon sheet
X5136 has a patent-pending construction of a carbon-filled polystyrene core co-extruded with a surface layer of Stat-Rite polymer alloy. Because there is no carbon on the sheet surface, no carbon residue is left behind on components, assemblies or the work surface. The carbon-filled core maintains the volume resistivity, quick static decay time and EMI shielding of the traditional carbon sheet.
Noveon Inc.
Cleveland, OH
(216) 447-6374
|
Shoe cleaner
The 2001-TB removes all types of contamination from most footwear. The fully automated product has four motor-driven brushes that clean sides, top and bottom. A weight-loaded top brush fits the contour of upper shoe surfaces, including shoelaces. The unit is powered by a low rpm, 1/6 HP electric gear motor that operates on 120 V, 60 Hz. The cover is rotomolded white polyethylene. The manufacturer recommends using the shoe cleaner in conjunction with a vacuum system.
Liberty Industries Inc.
East Berlin, CT
(860) 828-6361
|
Charge plate monitor
The EA-4 system features two modes of operation: a discharge time mode with easy-to-program start and stop voltages and a plate voltage mode. It uses a charge-plate monitor design that utilizes an ultra-high impedance, high-voltage follower to monitor the test plate voltage. According to the manufacturer, this technique provides high accuracy and virtually infinite impedance loading of the plate, while allowing the test plate to be charged and monitored through the same small-diameter connection. With the product's serial interface port, any series of tests can be duplicated, analyzed, programmed or retrieved using PC-based software.
SIMCO
Hatfield, PA
(215) 997-0590
Glassware washer
Reliance 200 and 250 glassware washers are intended for pharmaceutical research, biotechnology and biopharmaceutical applications. The 200 is a premium under-counter model with industrial-strength cleaning capabilities. The 250 is a small cabinet model that offers a storage compartment below the wash chamber for accessories and detergent containers. Both have a premium 316L stainless-steel wash chamber. Their microprocessor controls offer three pre-programmed cycles for light, medium and heavy cleaning, as well as three programmable cycles for specific application to individual laboratories.
Steris Corp.
Mentor, OH
(440) 354-2600
|
Air handling system
Using proprietary airflow design methods, the Distributed Airhandling system can achieve 40 percent savings in energy consumption. It enables using standard air conditioning units and eliminates potentially leaky ceiling plenums. The core of the system is a low noise fan powered Model 2002 patented Bio Plus electrically enhanced bactericidal HEPA filter. Each Model 2002 is used with four to six terminal HEPAs for Class 0.1 to 100 cleanrooms.
Technovation
Midlothian, VA
(804) 744-0604
Gas purifier retrofit
Gas purifier retrofit packages for Gallium Nitride and Gallium Arsenide MOCVD tools enable the tool users to upgrade the performance of the MOCVD tool with modifying existing plumbing. The GateKeeper purifiers that make up the retrofit packages operate at ambient temperatures, require no heat or power and require no special gases for conditioning.
Aeronex Inc.
San Diego, CA
(858) 452-0124
Regulators
The 493 Series of single-stage cylinder gas regulators is suited for gauge calibration, airplane strut charging, aerospace hydraulic systems and high-presure hydrogenation. The 316L stainless-steel wetted parts make the series suitable for the control of corrosive gases and mixtures required at high pressure. They provide reliable gas delivery for pressures up to 6000 psig. The modular Capsule seat assembly eliminates the chance of incorrect field assembly and simplifies service.
Concoa
Virginia Beach, VA
(800) 225-0473
|
Tubing
Pure Air Tubing withstands not only harsh gases but also the fluorescent lighting typically found in cleanroom environments. It is also intended for applications involving nitrogen and vacuum lines and oil-free air lines. The tubing resists corrosion, chemicals and UV light. Its heat- and UV-stabilized, seamless single-wall extruded high-purity polymeric core tube is surrounded by an open-ply fibrous reinforcement with a protective chemical- and abrasion-resistant polymeric outer sheath. The tubing is available in OD sizes of 1/8, 1/4, 3/8, 1/2, 5/8 and 3/4 inch.
Parker Parflex Division
Ravenna, OH
(330) 296-2871
|
Work surfaces
Static Dissipative Laminates provide durable work surfaces that are suited for electronically sensitive applications that are carried out in a range of relative humidity conditions. The black low-glare pattern option is intended for high color contrast workstation environments, such as fiberoptics assembly, where it reportedly contributes to enhanced worker productivity. Other color choices include beige, almond, white, gray, graystone and blue. All provide a controlled path to ground for the dissipation of static electricity and all incorporate the Armored Protection Surface, which reduces shedding to one-tenth that of conventional laminates.
Nevamar Decorative Surfaces
Odenton, MD
(800) 638-4380