New Products

For immediate response go to www.onlinecenter.to/cr and request information by inquiry number, advertiser or by product code.

Click here to enlarge image

Parenteral particle tester
The HIAC 9703 System measures particles from small and large volume parenterals as well as fluid used for cleaning medical devices and precision parts. It detects particles in the range of 1.3 to 600 microns, according to company claims. The HRLD series sensors are used exclusively with this system to size particles through their dynamic range.
HIAC/Pacific Scientific Instruments
Grants Pass, OR
www.particle.com
Circle No. 200

Click here to enlarge image

HEPA filter
The Ultra Low-pressure Drop EEF HEPA filter system offers the following specifications: 24x24x12 inches deep (same as conventional deep HEPAs), 0.5-inch water column (WC) pressure drop at 2400 scfm, and a lifetime of about two to three times greater than conventional HEPAs of the same size at the same flow rate. It also inhibits bacterial growth and survival on the filter medium.
Technovation
Midlothian, VA
www.technovation.org
Circle No. 201

Wiper dispenser
The Wipe'O'Mat cleanroom wiper dispenser feeds a single wiper anytime to reduce waste. A built-in wetting mechanism, at the press of a button, lets you wet the wiper with a controlled amount of solvent of pre-determined concentration level. The unit is powered by an internal rechargeable battery.
ECI Technology
East Rutherford, NJ
www.ecitechnology.com
Circle No. 202

Click here to enlarge image

Low-pressure sensor
The LP 1000 series of low-differential/gauge pressure sensors is fully wet/wet compatible for use with conductive fluids, configured for uni-directional or bi-directional operation using a two-wire current or three-wire voltage interface. An inductive sensing principle is employed to provide maximum sensitivity to detect even small variations in pressure. According to the manufacturer, the beryllium copper sensing diaphragm operates with minimal displacement for long-term performance and resistance to shock and vibration. The product is offered with an optional liquid crystal display (LCD) and a variety of mounting configurations.
Druck Limited
Groby, Leicester, England
www.druck.com
Circle No. 203

Click here to enlarge image

Pressure calibrator
Model 3610 Meri-Cal II, a portable microprocessor-based pressure-sensing device for measuring differential, gauge, vacuum or absolute pressure, incorporates a Data Logging mode and on-board memory to provide calibration documentation at the stroke of a key. Calibration procedures can be set up using the Windows 95 data logging program, allowing up to 20 PC calibration files of up to 20 points each to be downloaded from a PC. Users then receive prompts of required calibration points.
Meriam Instrument
Cleveland, OH
www.meriam.com
Circle No. 204

Click here to enlarge image

Piezoelectric motors
The HR-V and HR-UV Series motors are for use in vacuum environments. With a size range from a single-element (providing 0.45 kg of force) to an eight-element motor (providing 3.6 kg of force), the HR series is capable of driving both linear and rotary stages. The HR-V vacuum series is rated up to 107 Torr and the HR-UV is rated up to 1010 Torr. Both configurations are suitable for bake out and operate without any magnetic field.
Nanomotion Inc.
Ronkonkoma, NY
www.nanomotion.com
Circle No. 205

Click here to enlarge image

Conveyor
The roller knife-edge design on the conveyors permits the direct transfer of items from one conveyor to another without a transfer plate. This is accomplished with less friction and greater belt life than non-roller knife-edge conveyors. The feature is available as an option on two series: the CSK “slimline,” which contains its motor within its frame, and the CSJ series of extruded aluminum frame conveyors. Standard belt widths range from 30 to 200 mm. Belt lengths between pulleys are from 500 mm to 2000 mm. Standard speeds are from 1.3 m/min to 18.8 m/min.
ASG
Cleveland, OH
www.asg-jergens.com
Circle No. 206

Click here to enlarge image

Pressure transmitter
With an accuracy of ±0.5 percent FS, according to company claims, the Series 655 wet/wet differential pressure transmitter measures low-pressure ranges of 5.0 inches water column (WC) differential (1.24 kPa) and withstands working pressures up to a maximum 100 psi (6.89 Bar). Units can be used to measure gas or liquid pressures compatible with 316/316L stainless steel wetted parts. The product converts a differential pressure measurement into a standard 4- to 20-mA output signal.
Dwyer Instruments Inc.
Michigan City, IN
www.dwyer-inst.com
Circle No. 207

Materials catalog
A catalog featuring the company's line of Rulon High Performance Fluoropolymer Materials includes an explanation of materials and processes and a material selection guide. A typical product and application description is outlined for the most common 15 grades of Rulon material.
Saint-Gobain Performance Plastics
Wayne, NJ
www.plastics.saint-gobain.com
Circle No. 208

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.