#9: Record Silicon Nanowire MOSFETs

The integration scheme allows for a reduced, more uniform diffusion distance, affording a more abrupt junction.

The integration scheme allows for a reduced, more uniform diffusion distance, affording a more abrupt junction.

Record Silicon Nanowire MOSFETs: IBM researchers will describe a silicon nanowire (SiNW)-based MOSFET fabrication process that produced gate-all-around (GAA) SiNW devices at sizes compatible with the scaling needs of 10nm CMOS technology. They built a range of GAA SiNW MOSFETs, some of which featured an incredible 30nm SiNW pitch (the spacing between adjacent nanowires) with a gate pitch of 60nm. Devices with a 90nm gate pitch demonstrated the highest performance ever reported for a SiNW device at a gate pitch below 100nm— peak/saturation current of 400/976µA/µm, respectively, at 1 V. Although this work focused on NFETs, the researchers say the same fabrication techniques can be used to produce PFETs as well, opening the door to a potential ultra-dense, high-performance CMOS technology. (Paper #20.2, “Density Scaling with Gate-All-Around Silicon Nanowire MOSFETs for the 10nm Node and Beyond,” S. Bangsaruntip et al, IBM)

The TEM electron microscope images above show: a) a cross section of a completed device through a gate, illustrating the spacer, epitaxial source/drain and contacts;  (b) the cross section of a silicon nanowire (SiNW) decorated with a high-Z film to better show the nanowire’s boundary. The effective SiNW diameter shown is 12.8 nm; (c) a close up of the region of interest indicated in a), showing that the source/drain is epitaxially regrown from the cut face of the nanowire. The lattice planes in the epi region are registered to that of the original SiNW channel (parallel red dashed lines).

The TEM electron microscope images above show: a) a cross section of a completed device through a gate, illustrating the spacer, epitaxial source/drain and contacts; (b) the cross section of a silicon nanowire (SiNW) decorated with a high-Z film to better show the nanowire’s boundary. The effective SiNW diameter shown is 12.8 nm; (c) a close up of the region of interest indicated in a), showing that the source/drain is epitaxially regrown from the cut face of the nanowire. The lattice planes in the epi region are registered to that of the original SiNW channel (parallel red dashed lines).

<< Previous                        Next>>

Jump to Page [1]   [2]   [3]   [4]   [5]    [6]   [7]   [8]   [9]   [10]   [11]

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.