In its new report MEMS Front-End Manufacturing Trends, Yole Développement goes further in the equipment and materials market forecasts and in the manufacturing trends for MEMS. The report gives detailed analyses about MEMS device technology process flow, manufacturing trends and manufacturing cost breakdown.
Changes in MEMS manufacturing will drive the equipment & materials market from $378M to $512M for equipment and $136M to $248M for materials between 2012-2018
Innovative processes are fueling the MEMS equipment and materials market. Yole Développement forecasts that demand for MEMS-related equipment will grow from an estimated $378M in 2012 to greater than $510M by 2018, at a CAGR of 5.2% over the next five years. Yole Développement’s MEMS market forecast will follow a cyclical up/downturn similar to what the mainstream IC equipment market underwent.
The demand for materials and related MEMS consumables will grow from an estimated $136M in 2012 to greater than $248M by 2018 at a CAGR of 10.5% over the next five years.
As MEMS become commodity products, manufacturing will change and mature
Today, MEMS fabrication is still very diversified and lacking in standardization; Yole Développement’s rule, One product, one process, still applies. Indeed, MEMS has a different story than IC and doesn’t follow the same roadmap as the semiconductor industry. Thus, it’s still common to see many players with radically different manufacturing approaches for the same MEMS device, sometimes within the same company (i.e. both the CMOS MEMS and hybrid approaches can be used for inertial devices or microphones).
However, as MEMS becomes a commodity product with a quicker time-to-market compared to previous generations, anything that speeds up the commercialization process is welcome. MEMS packaging is evolving in a different direction than front-end processing, and Yole Développement has already identified that packaging standardization will become increasingly critical in order to support the massive volume growth in unit shipments, and decrease overall costs associated with MEMS and sensor content. For example, microphone packaging is very similar between one manufacturer and another. Additionally, this report shows that at the front-end level, companies are developing in-house technological platforms targeted for different MEMS devices.
In this report, Yole Développement shows that as MEMS moves from competing on process technology to competing on functions and systems, a move towards more standard solutions is necessary to drive down package size and cost.
Currently, MEMS foundries still compete at the process level and have to propose a wide range of processes in order to cope with new MEMS designs and structures. This approach differs from fabless companies, which usually focus on one type of MEMS design. Their main objective is to find the most experienced and reliable foundry partner in order to convince customers of their expertise. IDMs, meanwhile, generally rely on robust and established MEMS processes to manufacture their products. Foundries, which must always remain at the forefront of changes in the MEMS manufacturing landscape, have the biggest challenge.
TSV & unique wafer stacking solutions are key enablers for reducing die size and cost
This report highlights the major front-end manufacturing changes. For example, TSV for CSP is gradually seeping into the MEMS industry.
However, since miniaturization will be limited, new detection principles are currently being developed at various R&D Institutes (i.e. Tronic’s M&NEMS concept) in order to lower MEMS size at the silicon level. This technology is based on piezoresistive nanowires rather than pure capacitive detection, and is poised to be a leap forward in terms of device performance and chip size. This will set the stage for a new generation of combo sensors for motion sensing applications, achieving both significant surface reduction and performance improvement for multi-DOF sensors.
Amongst the large array of MEMS technologies, Yole Développement identified several that will have the widest diffusion in the years to come.
The list includes:
• Through Si Vias
• Room Temperature Bonding
• Thin Films PZT
• Temporary Bonding
• Cavity SOI
• CMOS MEMS
Other MEMS technologies, i.e. gold bonding, could be widely used to reduce die size while maintaining great hermeticity for wafer level packaging.