MEMS wafer inspection system from Sonoscan

Sonoscan has announced its AW322 200 fully automated system for ultrasonic inspection of MEMS wafers. Based on Sonoscan’s C-SAM technology, the system images and identifies internal gap-type defects down to 5 microns in size. It is especially useful for finding non-bonds, voids and other defects in the seals surrounding the MEMS wafer cavities.

AW322 200 system features include:

  • Two loadports, two stages and multiple transducers, enabling it to image two 8-inch MEMS wafers simultaneously.  Other models in the AW series are available to accommodate wafer sizes from 100-300mm.
  • The SECS/GEM-enabled Robotic Handling Station includes alignment and drying operations.
  • Waterfall technology to minimize water exposure during scanning.
  • Sonoscan’s advanced analysis software for accurate application of the user’s accept/reject criteria.

In operation, the Robotic Handling Station counts and unloads wafers from the carriers, aligns wafers for scanning and positions wafers on the stage. The transducers travel over 1 m/s while pulsing ultrasound at frequencies up to 230 MHz and receiving thousands of return echoes per second.  Both the transducers and the 500 MHz bandwidth pulser/receiver were designed and manufactured by Sonoscan.

The key defects imaged in MEMS wafers are non-bonds of the seal to a wafer, voids within the seal material and other gap-type defects that can compromise the hermeticity of the cavity.

After scanning, both the acoustic wafer image and the wafer data can be used for accept/reject determination. Criteria are defined by the user with respect to acceptable defect counts and sizes.

White areas in this 230 MHz Sonoscan acoustic image show incomplete (left) and complete (right) breaks in the seal around MEMS cavities.

White areas in this 230 MHz Sonoscan acoustic image show incomplete (left) and complete (right) breaks in the seal around MEMS cavities.

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.