This article originally appeared on SemiMD.com and was featured in the December 2016 issue of Solid State Technology.
By David Lammers, Contributing Editor
When analyst Linley Gwennap is asked about the chances that fully-depleted silicon-on-insulator (FD-SOI) technology will make it in the marketplace, he gives a short history lesson.
First, he makes clear that the discussion is not about “the older SOI,” – the partially depleted SOI that required designers to deal with the so-called “kink effect.” The FD-SOI being offered by STMicroelectronics and Samsung at 28nm design rules, and by GlobalFoundries at 22nm and 12nm, is a different animal: a fully depleted channel, new IP libraries, and no kink effect.
Bulk planar CMOS transistor scaling came to an end at 28nm, and leading-edge companies such as Intel, TSMC, Samsung, and GlobalFoundries moved into the finFET realm for performance-driven products, said Gwennap, founder of The Linley Group (Mountain View, Calif.) and publisher of The Microprocessor Report, said,
While FD-SOI at the 28nm node was offered by STMicrelectronics, with Samsung coming in as a second source, Gwennap said 28nm FD-SOI was not differentiated enough from 28nm bulk CMOS to justify the extra design and wafer costs. “When STMicro came out with 28 FD, it was more expensive than bulk CMOS, so the value proposition was not that great.”
NXP uses 28nm FD-SOI for its iMX 7 and iMX 8 processors, but relatively few other companies did 28nm FD-SOI designs. That may change as 22nm FD-SOI offers a boost in transistor density, and a roadmap to tighter design rules.
“For planar CMOS, Moore’s Law came to a dead end at 28nm. Some companies have looked at finFETs and decided that the cost barrier is just too high. They don’t have anywhere to go; for a few years now those companies have been at 28nm, they can’t justify the move on to finFETs, and they need to figure out how they can offer something new to their customers. For those companies, taking a risk on FD-SOI is starting to look like a good idea,” he said.
A cautious view
Joanne Itow, foundry analyst at Semico Research (Phoenix), also has been observing the ups and downs of SOI technology over the last two decades. The end of the early heyday, marked by PD-SOI-based products from IBM, Advanced Micro Devices, Freescale Semiconductor, and several game system vendors, has led Itow to take a cautious, Show-Me attitude.
“The SOI proponents always said, ‘this is the breakout node,’ but then it didn’t happen. Now, they are saying the Fmax has better results than finFETs, and while we do see some promising results, I’m not sure everybody knows what to do with it. And there may be bottlenecks,” such as the design tools and IP cores.
Itow said she has talked to more companies that are looking at FD-SOI, and some of them have teams designing products. “So we are seeing more serious activity than before,” Itow said. “I don’t see it being the main Qualcomm process for high-volume products like the applications processors in smartphones. But I do see it being looked at for IoT applications that will come on line in a couple of years. And these things always seem to take longer than you think,” she said.
Sony Corp. has publicly discussed a GPS IC based on 28nm FD-SOI that is being deployed in a smartwatch sold by Huami, a Chinese brand, which is touting the long battery life of the watch when the GPS function is turned on.
GlobalFoundries claims it has more than 50 companies in various stages of development on its 22FDX process, which enters risk production early next year, and the company plans a 12nm FDX offering in several years.
IP libraries put together
The availability of design libraries – both foundation IP and complex cores – is an issue facing FD-SOI. Gwennap said GlobalFoundries has worked with EDA partners, and invested in an IP development company, Invecas, to develop an IP library for its FDX technology. “Even though GlobalFoundries is basically starting from scratch in terms of putting together an IP library, it doesn’t take that long to put together the basic IP, such as the interface cells, that their customers need.
“There is definitely going to be an unusual thing that probably will not be in the existing library, something that either GlobalFoundries or the customers will have to put together. Over time, I believe that the IP portfolio will get built out,” Gwennap said.
The salaries paid to design engineers in Asia tend to be less than half of what U.S.-based designers are paid, he noted. That may open up companies “with a lower cost engineering team” in India, China, Taiwan, and elsewhere to “go off in a different direction” and experiment with FD-SOI, Gwennap said.
Philippe Flatresses, a design architect at STMicro, said with the existing FDSOI ecosystem it is possible to design a complete SoC, including processor cores from ARM Ltd., high speed interfaces, USB, MIPI, memory controllers, and other IP from third-party providers including Synopsys and Cadence. Looking at the FD-SOI roadmap, several technology derivatives are under development to address the RF, ultra-low voltage, and other markets. Flatresses said there is a need to extend the IP ecosystem in those areas.
Wafer costs not a big factor
There was a time when the approximately $500 cost for an SOI wafer from Soitec (Grenoble, France) tipped the scales away from SOI technology for some cost-sensitive applications. Gwennap said when a fully processed 28nm planar CMOS wafer cost about $3,000 from a major foundry, that $500 SOI wafer cost presented a stumbling block to some companies considering FD-SOI.
Now, however, a fully-processed finFET wafer costs $7,000 or more from the major foundries, Gwennap said, and the cost of the SOI wafer is a much smaller fraction of the total cost equation. When companies compare planar FD-SOI to finFETs, that $500 wafer cost, Gwennap said, “just isn’t as important as it used to be. And some of the other advantages in terms of cost savings or power savings are pretty attractive in markets where cost is important, such as consumer and IoT products. They present a good chance to get some key design wins.”
Soitec claims it can ramp up to 1.5 million FD-SOI wafers a year with its existing facility in 18 months, and has the ability to expand to 3 million wafers if market demand expands.
Jamie Schaeffer, the FDX program manager at GlobalFoundries, acknowledges that the SOI wafers are three to four times more expensive than bulk silicon wafers. Schaeffer said a more important cost factor is in the mask set. A 22FDX chip with eight metal layers can be constructed with “just 39 mask layers, compared with 60 for a finFET design at comparable performance levels.” And no double patterning is required for the 22FDX transistors.
Technology advantages claimed
Soitec senior fellow Bich-Yen Nguyen, who spent much of her career at Freescale Semiconductor in technology development, claims several technical advantages for FD-SOI.
FD-SOI has a high transconductance-to-drain current ratio, is superior in terms of the short channel effect, and has a lower fringing and effective capacitance and lower gate resistance, due partly to a gate-first process approach to the high-k/metal gate steps, Nguyen said.
Back and forward biasing is another unique feature of FD-SOI. “When you apply body-bias, the fT and fmax curves shift to a lower Vt. This is an additional benefit allowing the RF designer to achieve higher fT and fmax at much lower gate voltage (Vg) over a wider Vg range. That is a huge benefit for the RF designer,” she said. Figure 1 illustrates the unique benefit of back-bias.
“To get the full benefit of body bias for power savings or performance improvement, the design teams must consider this feature from the very beginning of product development,” she said. While biasing does not require specific EDA tools, and can be achieve with an extended library characterization, design architects must define the best corners for body bias in order to gain in performance and power. And design teams must implement “the right set of IPs to manage body biasing,” such as a BB generator, BB monitors, and during testing, a trimming methodology.
Nguyen acknowledged that finFETs have drive-current advantages. But compared with bulk CMOS, FD-SOI has superior electrostatics, which enables scaling of analog/RF devices while maintaining a high transistor gain. And drive current increases as gate length is scaled, she said.
For 14/16 nm finFETs, Nguyen said the gate length is in the 25-30 nm range. The 22FDX transistors have a gate length in the 20nm range. “The very short gate length results in a small gate capacitance, and total lower gate resistance,” she said.
For fringing capacitance, the most conservative number is that 22nm FD-SOI is 30 percent lower than leading finFETs, though she said “finFETs have made a lot of progress in this area.”
Analog advantages
It is in the analog and RF areas that FD-SOI offers the most significant advantages, Nguyen said. The fT and fMAX of 350 and 300 GHz, respectively, have been demonstrated by GlobalFoundries for its 22nm FD-SOI technology. For analog devices, she claimed that FD-SOI offers better transistor mismatch, high intrinsic device gain (Gm/Gds ratio), low noise, and flexibility in Vt tuning. Figure 2 shows how 22FDX outperforms finFETs for fT/fMax.
“FDSOI is the only device architecture that meets all those requirements. Bulk planar CMOS suffers from large transistor mismatch due to random dopant fluctuation and low device gain due to poor electrostatics. FinFET technology improves on electrostatics but it lacks the back bias capability.”
The undoped channel takes away the random doping effect of a partially depleted (doped) channel, reducing variation by 50-60 percent.
Analog designers using FD-SOI, she said, have “the ability to tune the Vt by back-bias to compensate for process mismatch or drift, and to offer virtually any Vt desired. Near-zero Vt can also be achieved in FD-SOI, which enables low voltage analog design for low power consumption applications.”
“If you believe the future is about mobility, about more communications and low power consumption and cost sensitive IoT chips where analog and RF is about 50 percent of the chip, then FD-SOI has a good future.
“No single solution can fit all. The key is to build up the ecosystem, and with time, we are pushing that,” she said.