Bench mat
The Cleanroom Bench Mat is a non-slip, static dissipative product that addresses the need to prevent movement and loss of small items or control vibration, while offering a secure, cushioned work surface. Approved for use in every level cleanroom, the mat is non-particulating, non-outgassing and silicone and DOP free. The mat is available in black or gray, as a 24 x 18-inch mat or in a 24-inch x 40-foot roll.
Dycem Ltd.
Warwick, RI
(401) 738-4420
Tape
Two permanent/strippable, acrylic acid-free, ultra-low-outgassing bonding tapes have been added to the ARclean line of electronically clean products. The DEV-8968 and DEV-8969 both have a permanent adhesive on one side and a cleanly strippable adhesive on the other side. The permanent low-outgassing adhesive is exposed upon removing the clear or white polyester release liners. DEV-8968 has a 2-mil clear polyester film carrier and the DEV-8969 has a 2-mil white polyester film carrier. The thicker carriers allow for easier dispensing during manufacturing.
Adhesives Research Inc.
Glen Rock, PA
(717) 235-7979
Air flow modeler
The Reverse Tracer feature in the company?s Flovent air flow modeling software for building services engineers and architects simplifies identifying the source of contamination in new and existing cleanroom designs. The new function enables the user to specify an area of contamination and determine the exact location from which the contamination springs. Once this location has been determined, it is then possible to run a series of design scenarios to determine the best way to eliminate this source using another new feature, Command Center.
Flomerics Inc.
Southborough, MA
(508) 357-2012
Trace gas detector
Model 196 Leakseeker is a versatile portable trace gas leak detector. Utilizing a micro volume thermal conductivity cell, the unit will pinpoint and quantify trace amounts of most non-toxic gases, including helium, carbon dioxide, argon and refrigerants down to 1×10<+>-5<+> atm cc/sec in less than one second. The lightweight nozzle probe can be detached from the hand console, containing the battery power pack, for freedom in detecting leaks in complex systems.
ITI Qualitek Inc.
N. Billerica, MA
(978) 670-1113
Vacuum inlet trap
The MV Multi-Trap Model IC features water-cooled internal coils that provide more than 1300 cm<+>2<+> of surface area, along with two customizable filtration stages to condense and collect heavy particles. Developed for production processes that generate large amounts of condensables, this product has more than 8000 cm<+>3<+> of space to accumulate solids and keep production lines operating longer. It is constructed of all stainless steel and is offered with ISO-80 or ISO-100 flanges.
MV Products, Division of Mass-Vac Inc.
N. Billerica, MA
(978) 667-2393