New Products
04/01/2002
null
Web-based analysis
iProcess software enables fab and supervisory personnel to use commercially available Web browsers both inside and outside the factory to monitor factory-wide process and tool health. The product's range of graphical reports meets the summary data requirements of senior factory management as well as the detailed information needs of process and equipment engineers. The interface is designed to provide drill-down capability into equipment and sensor data for troubleshooting using the company's Equipment Engineering Solutions (EES) product line.
Brooks Automation Inc.
Chelmsford, MA
(978) 262-2459
 |
Scanner
RTP 300 Series conductive carbon nanotube polycarbonate compound is used in the manufacture of the Imageteam 3800ESD, a high-performance scanner for use in cleanroom assembly of sensitive electronic components. According to the manufacturer, "nano" sized hollow carbon tubes provide a high aspect ratio (length:diameter), capable of delivering ESD conductive properties at low loadings. Carbon nanotubes create a more uniform conductive surface, eliminating dangerous "hot spots." Surface resistivity is specified as 10E3 to 10E5 ohm/sq.
RTP Company
Winona, MN
(507) 454-6900
 |
Emergency kit
The Spill Kaddie is a mobile, compact emergency kit for fast spill response or maintenance mess prevention. Contents include one roll of (200) 7.5- x 9-inch pads, five 3- x 4-inch socs, eight 9- x 9-inch pillows, one pair of goggles, one pair of Nitrile gloves, five 6-mil plastic bags and one emergency response handbook. The cart is 18 x 17 x 39 inches and weighs 42 pounds. It is gray with black wheels and can absorb 22 gallons of fluid per kit.
Sorbent Products Company
Somerset, NJ
(732) 302-0080
 |
Vacuum inlet/exhaust trap
The MV Multi-Trap Model IC vacuum inlet/exhaust trap has a stainless steel knock-down stage for collecting heavy solids and can be configured with two banks of ten replaceable 4.5-inch filter elements or one of five 9.5-inch elements. Featuring water-cooled internal coils with better than 200 sq. in. surface area, this high-capacity trap collects both condensables and particles. Available with copper or stainless steel gauze, molecular sieve, activated charcoal, activated alumina, Sodasorb and pleated polypropylene filter elements, the product is readily customized. Pricing starts at $3,500.
MV Products Division of Mass-Vac Inc.
No. Billerica, MA
(978) 667-2393
 |
Fume arm
Six- or eight-inch diameter standard or stainless steel extractor arms provide a non-corrosive, washable means of extracting hazardous materials such as pharmaceutical dusts, acidic or caustic chemicals. Custom holes can be installed at the joints to suit a particular problem. The fume arms have no encumbrances inside the arm, which enables clear and free movement of contaminated air and eliminates the possibility of residue build up. All adjustments for the settings are accessed from the outside. Units come in a variety of standard production models, both with and without fans and filters.
OsKar Antipollution Inc.
Montreal, Quebec
(514) 353-4949
 |
Silicone tubing
APST unreinforced silicone tubing is translucent, platinum cured and manufactured in a HEPA-filtered, ISO Class 6 cleanroom. The tubing is manufactured from low volatile- grade silicone and meets USP Class VI, FDA CFR 177.2600, ISO 10993 and 3A standards. It is flexible and autoclavable and resists compression set, chemical attack, radiation, ozone, moisture, environmental exposure and temperature extremes. The tubing imparts no taste or odor to critical streams. The tubing is not for implantation.
AdvantaPure
Southampton, PA
(215) 526-2151
 |
Environmental monitor
The DirectSense IAQ PPC is a Pocket PC-based system that takes accurate measurement of key indoor air-quality parameters and enables extensive information from measurement locations to be input into the mobile computer. Carbon dioxide, carbon monoxide, relative humidity, temperature, air speed and more can be displayed and data logged. Users can instantaneously record data during a walkthrough or on timed intervals over hours/days/ weeks/months. Each individual location file, which measurement data is recorded to may also have text notes, audio notes, Microsoft Word templates, graphic notes and calibration information stored concurrently.
Gray Wolf Sensing Solutions
Trumbull, CT
(203) 416-0005
 |
RH/temperature logger
The VL-2000 validatable data logger is a palm-sized, self-powered recorder for secure high-accuracy monitoring of temperature and relative humidity conditions. The logger is equipped with internal sensors, memory, clock and ten-year battery. It has an accuracy of ±2% RH and ±0.15°C and can be used in environments ranging from -40°C to 85°C and 0% to 100% RH. Equipped with 12-bit resolution, the logger can monitor minute variations in humidity and temperature with an average precision of 0.025%RH and 0.05°C. The unit works with vLog software, a program that creates password-protected tamper-proof files and printed reports.
Veriteq Instruments Inc.
Richmond, BC Canada
(604) 273-6850
 |
Thermometer
Models IR400 and IR500 infrared temperature thermometers can measure hot, hazardous or hard-to-reach materials without affecting or contaminating the material's surface. The IR400 has a single-point laser sighting and a temperature range of -25°F to 750°F. The IR500 has an eight-point circular sighting, helping define the target that is being measured and a larger temperature range of -25°F to 950°F. Each model features fixed emissivity of 0.95, backlit four-digit LCD, which displays in user-selectable units of either degrees Fahrenheit or degrees Celsius, Max temperature display, seven-second display hold and a hard plastic carrying case.
Dwyer Instruments Inc.
Michigan City, IN
(219) 879-8868
Gas analyzer
The Prisma 80 RGA residual gas analyzer and leak detector monitors the gases in a vacuum coating system to ensure that the correct vacuum conditions exist. The product features a 32-bit operating system with TalkStar software. Multiscan windows permit simultaneously displaying screens of wide-ranging scans or focusing in on key components. Other features include integrated total pressure measurement, high-sensitivity ion source and two filaments for longer service life.
Pfeiffer Vacuum Inc.
Nashua, NH
(603) 578-6500
 |
Chiller
The ultracool high-quality, compact water chiller is suited for process cooling applications that require precise temperature control and reliable operation. The chillers have a cooling capacity range of 0.23 to 58 tons with options for customization.
ultrafilter inc.
Norcross, GA
(800) 543-3634
 |
Gas purifier
Any gas piping system can be upgraded by replacing existing gas filters and purifiers with GateKeeper drop-in replacement purifiers. They meet all form, fit and function specifications with no need to modify existing plumbing. Typical gases purified include ammonia, hydrogen, silane, oxygen, argon and CDA. Applications that require purification include photolithography, MOCVD and MBE in addition to others. The purifiers remove contaminants such as H2O, O2, CO, CO2, H2, siloxanes, hydrocarbons, amines and acid gases to sub-part-per-billion levels.
Aeronex
San Diego, CA
(858) 452-0124
 |
Ionizing air blower
The VSE3000 eliminates electrostatic charges. The unit's variable speed fan and integral airflow diffuser flood the entire workstation with static-eliminating ions. The patented self-balancing circuitry maintains a balance range of 0±5 V. Discharge time is >1.0 second at 12 inches. According to the manufacturer, noise levels are low due to sophisticated sound-absorbing materials. An individually controlled heater provides operator comfort. The unit also can be mounted overhead or on the wall.
SIMCO
Hatfield, PA
(215) 997-0590
Sterilizer
Class 100 sterilizers feature a flush front door with a fully automatic, pneumatically powered interlock mechanism that incorporates a hidden latch system. The unit features a touchscreen PLC, temperature recorder, custom transfer card, 66-ft3 workspace and a maximum temperature of 280°C. Flush front sterilizers are typically used for glassware depyrogenation, but are also used in a variety of biotech, medical and diagnostic applications.
Gruenberg Oven
Williamsport, PA
(888) 611-6836
Seating
Eight series of chrome-plated ergonomic chair models ensure cleanroom compatibility at the ISO Class 5 level. A filtration system within the seat traps particles while allowing the seat to conform to body shape. The filter enables unrestricted airflow with a filter permeability of 230 cfm/ft2. The polypropylene filter media traps particles that are 0.1 micron and larger. The chair's backrest is encased in vinyl upholstery. A task control mechanism facilitates chair adjustment.
BioFit Engineered Products
Waterville, OH
(419) 823-1089
Liquid particle counter
The Ultra DI-30 is capable of sizing and counting 0.03-micron particles in ultra-pure water systems. The large sample volume provides increased statistical data for higher performance. Cosmic ray elimination for ultra-low counts improves measurement precision. Communications via 4-20 mA facilitates integration into existing facility management systems and Ethernet communications utilizes existing networks. Process control is offered via PMS FacilityNet software.
Particle Measuring Systems
Boulder, CO
(800) 238-1801
Barrier filter
The Millidisk barrier filter enables post-sterilization, pre-use integrity testing of sterile filtration systems without compromising downstream sterility. It filters both liquid and gas simultaneously prior to integrity testing. The device combines hydrophilic and hydrophobic Durapore PVDF membranes in one unit.
Millipore Corporation
Bedford, MA
(781) 533-2897
Roll door
The Pharma-Seal roll door provides effective environmental control with a stainless steel look for non-wash-down applications or where hygienic needs are less stringent. Removable stainless steel side column covers facilitate cleaning. The door opens at 42 inches per second and is designed for heavy traffic. The Break-Away bottom bar allows the door to withstand the impact of a forklift and be reset, without tools, in seconds. Anodized aluminum ribs provide resistance to negative pressure, while allowing panel replacement, including the standard 31-inch high, full-width vision window.
Rytec Corporation
Jackson, WI
(262) 677-9046
Pocket thermometer
Model 11025 FlashCheck quick-action digital pocket thermometer features a stainless steel probe that has a 0.095-inch diameter probe tip, which produces a 300 percent faster response time than previous models. Other features include a display "hold" button and ten-minute automatic shut-off to conserve battery life. The unit can be calibrated in the field. The thermometer can be rinsed in soapy water for thorough washing and sanitization. The water-resistant probe has an operating rang of -40°F to 302°F.
DeltaTRAK Inc.
Pleasanton, CA
(800) 962-6776
 |
Ultrasonic point level sensor
The +GF+SIGNET 2211/2212 ultrasonic point level sensors have no moving parts and feature redundant ultrasonic transducers for high reliability and accuracy in harsh environments. Designed with a slim body and dual 3/4-inch NPT, several sensors can be installed vertically or horizontally to provide multilevel control in process vessels. The 2212 also offers a DIN connector assembly. The sensors feature ±1 mm accuracy, from 6VDC to 24VDC power input with capabilities for 1 amp relay or 2-wire loop power output. They are available in 316L stainless steel or Tefzel for optimal resistance to corrosion when used in a variety of process liquids.
George Fischer Inc.
Tustin, CA
(714) 731-8800
 |
Infrared sensor
Model IL in-line infrared sensor is designed for easy integration into a four-wire system and can replace contact probes with a J-type thermocouple or with a 0-5 V output. The electronics are protected by a NEMA 4 (IP65) stainless steel housing, which enables the sensor to function in ambient temperatures to 160°F. The product measures target temperatures ranging from 32°F to 932°F. The distance-to-target ratio is 4:1 optics at 90 percent energy. The unit is powered by 12-24 VDC at 20 mA.
Dwyer Instruments Inc.
Michigan City, IN
(219) 879-8000
 |
Fluoroelastomers
The HS family of Technoflon fluoroelastomers offers fabricators a substantial reduction in post-cure time compared to standard fluoroelastomers. According to the company, this benefit enables fabricators to reduce their in-plant energy costs, speed throughput of their end product and reduce the need for costly inventory of their products. When injection- or compression-molded into o-rings, seals and other precision components, the HS fluoroelastomers exhibit reduced mold fouling. They also meet the wide range of high-performance industry specifications, including MIL-R-83248C.
Ausimont USA
Thorofare, NJ
(800) 323-2874