Device Architecture

DEVICE ARCHITECTURE ARTICLES



A year in review: Top 10 stories of 2016

12/23/2016  From the ground-breaking research breakthroughs to the shifting supplier landscape, these are the stories the Solid State Technology audience read the most during 2016.

ESD Alliance reports EDA industry revenue increase for Q3 2016

12/23/2016  The Electronic System Design (ESD) Alliance Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 7.0 percent for Q3 2016.

Advances in artificial intelligence, IoT highlight IHS Markit's global technology predictions for 2017

12/21/2016  From artificial intelligence to the Internet of Things (IoT), far-reaching innovations are unfolding in virtually every technology sector around the globe, continuing to change the way consumers, businesses and machines interact while also spurring the next revolution in tech market growth.

Has SOI's turn come around again?

12/21/2016  Analysts see another chance for Silicon-on-Insulator technology, as proponents claim technical and cost advantages for fully-depleted SOI.

Air-gaps for finFETs shown at IEDM 2016

12/21/2016  Researchers from IBM and GlobalFoundries will report on the first use of "air-gaps" as part of the dielectric insulation around active gates of "10nm-node" finFETs at the upcoming International Electron Devices Meeting (IEDM) of the IEEE.

Toshiba expands line-up of embedded NAND flash memory products for automotive applications

12/20/2016  Sample shipments start from today with mass production scheduled for the second quarter (April to June) of 2017.

Seoul Semiconductor Europe GmbH announces new CEO

12/20/2016  Andreas Weisl (38), former Vice President Europe of Korean LED manufacturer Seoul Semiconductor (SSC), has taken on the position of CEO at Seoul Semiconductor Europe GmbH based Munich, Germany, with effect from November 11, 2016.

Total memory market forecast to increase 10% in 2017

12/20/2016  After two years of decline, firming ASPs for DRAM and NAND flash will boost overall memory sales.

62 new facilities start operation 2017 and beyond

12/19/2016  Data from SEMI’s recently updated World Fab Forecast report reveal that 62 new Front End facilities will begin operation between 2017 and 2020.

North American semiconductor equipment industry posts November 2016 book-to-bill ratio of 0.96

12/16/2016  A book-to-bill of 0.96 means that $96 worth of orders were received for every $100 of product billed for the month.

Toshio Maruyama to receive SEMI Marketing Excellence Award at SEMICON Japan

12/15/2016  SEMI this week announced that Toshio Maruyama has been selected as the 2017 recipient of the SEMI Sales and Marketing Excellence Award, inspired by Bob Graham.

SEMICON China 2017 presents six forums in China's explosive growth market

12/14/2016  SEMI today announced the lineup for six forums at SEMICON China and FPD China held at the Shanghai New International Expo Centre on March 14-16, 2017.

New fab facilities: China dominates, followed by Americas and Taiwan

12/14/2016  The 62 facilities and lines range from R&D to high-volume fabs. Most of the newly operating facilities will be volume fabs; only seven are R&Ds or Pilot facilities.

SiFive named Startup of the Year

12/13/2016  SiFive, the first fabless provider of customized, open-source enabled RISC-V semiconductors, has been named "Startup of the Year" at the UBM Annual Creativity in Electronics (ACE) Awards held in conjunction with the Embedded Systems Conference Silicon Valley in San Jose.

Semiconductor equipment sales forecast: $40 Billion

12/13/2016  SEMI today reported that worldwide sales of new semiconductor manufacturing equipment are projected to increase 8.7 percent to $39.7 billion in 2016.

SEMICON Japan 2016 opens tomorrow at Tokyo Big Sight

12/13/2016  SEMICON Japan 2016, the largest and most influential event for the electronics manufacturing supply chain in Japan, opens tomorrow at Tokyo Big Sight.

Global Semiconductor Alliance announces 2016 Award recipients

12/09/2016  The Global Semiconductor Alliance (GSA) is proud to announce the award recipients honored at the 2016 GSA Awards Dinner Celebration that took place in Santa Clara, California.

Mentor Graphics announces 2016 winners of Don Miller Award for Thermo-Fluid Design Excellence

12/09/2016  Mentor Graphics Corporation today announced the winners of its second annual Don Miller Award for Excellence in System-Level Thermo-Fluid Design.

Global semiconductor sales increase 5% year-over-year in October

12/08/2016  The global semiconductor market has rebounded in recent months, with October marking the largest year-to-year sales increase since March 2015.

Leti says FD-SOI light-sensing technique can make transistors far more sensitive to visible light

12/08/2016  In IEDM 2016 presentation, institute’s team demonstrates potential sensing advantages of integrating photodiodes below buried oxide.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts