New Products
11/01/2000
 |
Load port
The OEM300I meets the BOLTS/Light standard (SEMI E15.1), which was developed for 300mm fabs that require full fab automation. The unit has a modular design that is light and compact with a small form factor.
AJS Automation
Ipswich, MA
(978) 356-7303
 |
ESD apparel
The ISO-TEC ESD dual-path to ground system provides redundancy in dissipating random static electricity. The garments have conductive cuffs, dual conductive waists and conductive epoxy snaps as well as conductive seams to assure that spurious static charges will migrate to one of the provided grounding paths on either the right or the left of the garment. According to the manufacturer, the garments have been repeatedly washed with standard laundry surfactants and have shown no measurable loss of effectiveness in more than 200 processings.
Hi-Tec Garments
Chatsworth, CA
(800) 444-2263
 |
Portable gas detector
Designed for use in cylinder receiving areas, temporary monitoring in labs and pilot plants, general survey work and emergency leak detection, the Model TG-STA portable gas detector is available for ammonia, arsine, chlorine, fluorine, HCl, HF, NF3, phosphine, SF6, freons, hydrocarbons and other haz-ardous gases. An electrochemical sensor is selected to react only to a particular gas or family of gases. Gas concentration is displayed on a local back-lit digital display and may also be output as both 4-20 mA and RS-485 signals. Other features include dual-level gas concentration alarms, instrument fault alarm and local audio and visual alarm indicators.
PureAire Monitoring Systems Inc.
Rolling Meadows, IL
(847) 788-8000
 |
Gas detection system
A microprocessor-controlled "smart" monitoring system for the continuous detection and measurement of hazardous gases, the STX-HT immediately alerts operating personnel to potentially lethal gas concentrations as well as conditions that compromise monitoring safety. The system comprises an STX transmitter/controller linked to a model HT gas sensor. Gas concentration information is displayed on a local digital readout and output as a 4-20 mA analog signal. Concentrations that exceed user-programmed action levels activate local alarm LEDs as well as dedicated concentration alarm relays.
PureAire Monitoring Systems Inc.
Rolling Meadows, IL
(847) 788-8000
Pressure sensor
The Signet 2450 pressure sensor offers an operating range of 0 to 10 psig. It is intended for liquid level applications, including monitoring of tank levels for UPW storage, chemical batching and effluent storage. Built-in temperature compensation provides +/-1 percent accuracy of full scale over a wide temperature range without drift. The sensor is available with either 1/2-inch union or 3/4-inch NPT threaded connections. Product design features an all-PVDF body and ceramic diaphragm. Three pressure ranges are offered: 0-10 psi for static pressures and level determination, 0-50 psi for moderate pressures or line regulation and 0 to 250 psi for high-pressure systems.
George Fischer Inc.
Tustin, CA
(714) 731-8800
 |
Vertical carousel
The Clean Room Vertical Carousel is used for high-density, cost-effective cleanroom storage for ISO Class 3 to 7 (Class 1 to 10,000) environments in the semiconductor, medical device and pharmaceutical manufacturing industries. According to the manufacturer, the system of rotating shelves delivers items quickly and directly to the user, providing safe and easy inventory access. The product can have multiple automatic doors for pass-through operation and the ability to link multiple work areas with different levels of cleanliness using one safe system. For semiconductor manufacturing, the carousel and load port provides 300mm-wafer storage and retrieval of both FOSB and FOUP carriers.
Remstar International Inc.
Westbrook, ME
(207) 854-1861
 |
Polymer storage system
The Lifestor MasterTrak overhead track polymer storage system combines high-density storage with sanitary, corrosion-free shelving conditions. The roller assembly eliminates binding, even on severely uneven floors. The overhead track is available in lengths ranging from 6 feet to 21 feet. Polymer shelf sections offer either clear epoxy zinc-plated mild steel or 16-gauge type 304 stainless steel posts. Adjustable and removable intermediate shelf sections are available in either solid or louvered styles. Their high-strength polymer composition enables them to be dishwasher sanitized.
Eagle MHC
Clayton, DE
(302) 653-3000
Conveying system
The Vac-Blo conveys materials into a tank where little or no headroom is available. It uses vacuum to pick up material and positive pressure to deliver it to the discharge point. Rates up to 4000 lbs/hr are achievable depending on the characteristics of the material being conveyed. The convey systems are available in carbon steel and 316 polished stainless steel for food and pharmaceutical use. According to the manufacturer, the sanitary version disassembles in minutes without the use of tools.
Vac-U-Max
Belleville, NJ
(973) 759-4600
 |
Angle seat valves
Type 2000 modular angle seat valve system is available in two basic versions: a standalone on/off unit with a single- or double-acting piston actuator or as a complete, continuous process control valve with Type 8630/31 TOP control head unit. Both combine high capacity and high flow rates with long life and low maintenance costs, according to the manufacturer. Applications can be found in water treatment, food and beverage, pharmaceutical, chemical, semiconductor, textile and industrial process industries. The systems can also be configured into equipment and machines, including industrial sterilizers, industrial washers, packaging machinery and machine tool cooling equipment.
Burkert USA
Irvine, CA
(949) 223-3100
 |
IR gas monitor
For monitoring toxic gases used in semiconductor manufacturing, the InfraTox monitor uses photoacoustic infrared sensing technology and features measurement ranges of 0-100 ppm or 0-1000 ppm, depending on the gas monitored. The unit provides stable detection of solvents and gases such as HCFCs, HFCs and PFCs. The instrument eliminates cross-sensitivity to water vapor and has zero drift to prevent false readings. Monitors are available in one-, four- or eight-sample point models and provide three alarm levels.
Zellweger Analytics Inc.
Lincolnshire, IL
(847) 955-8200
 |
Tube fitting
The Swagelok tube fitting features a patented back-ferrule design engineered to "hinge" during installation. According to the manufacturer, this design efficiently absorbs and redirects installation torque, helping to ensure more predictable gas-tight sealing and remakes. The product replaces, though is compatible with, the original Swagelok tube fitting and uses the same 1 1/4-turn installation requirements and installation gages.
Swagelok Company
Solon, OH
(440) 349-5934
 |
Biological safety cabinet
Forma Class II, Type A/B3 biological safety cabinets are offered in 4- and 6-foot benchtop models and provide a 21.5-inch viewing area. A Minihelic pressure gauge, two service valves and two GFIC-protected duplex outlets are standard. The 4-inch-wide intake grille eliminates the need for high-velocity momentum curtains. Vortex channels create high-velocity air in the window corners to increase protection. The blower continues to operate when the sliding window is closed. Return air slots, located above the work surface on each side wall, provide increased sample cross-contamination protection. According to the manufacturer, an all-metal, positive pressure plenum (enclosed within negative pressure air) with a hook and loop connection to the exhaust damper provides quick and easy filter changes.
Forma Scientific Inc.
Marietta, OH
(740) 373-4763
 |
Particle monitor
The FiberVac system measures particles inside the process environment by combining fiber-optic technology with an inter-cavity laser. Real-time detection provides instant feedback, reduces scrap and improves yield, according to the manufacturer. High sensitivity is achieved using an optical cavity that stores more than 500 watts of light energy. The high power provides strong signals from particles as small as 0.08 micron. The fiber-optic design has passive components such as lenses, mirrors and mechanical mounts inside the process chamber. Particle sampling from the system is transmitted to the interface module where the signal is converted and sent to a personal computer for displaying the data.
Particle Measuring Systems Inc.
Boulder, CO
(303) 443-7100
Hand gel
Klergel-70 sterile alcohol hand gel is cleanroom manufactured, double bagged and irradiated. It is supplied in 500ml containers that are each fitted with a pump dispenser. A wall-mounted palm dispenser and a wall-mounted elbow dispenser are available. The solution contains 70 percent v/v denatured ethanol and evaporates quickly from the skin leaving no sticky residue. According to the manufacturer, alcohol hand gels have proven efficacy against gram +ve and gram -ve bacteria and fungi.
Shield Medicare
Surrey, UK
+44 (0)1252 717616
 |
Solenoid valve
Servo-assisted modular valves are intended for low-cost fluid collecton and distribution systems. Available for either 1/2-inch or 3/4-inch pipe sizes, the valves comprise a modular extendable valve system Type 6227 that can be combined in a number of ways, with up to 12 valves in a single valve manifold. Operating at pressures up to 105 psi, the valves are activated with 12 VDC, 24 VDC, 10 VAC and 220 VAC. All have a power-indicating LED. They handle neutral and aggressive fluids and can be used in HVAC, hydraulic circuits and chemical plants.
Burkert Contromatic Corp.
Irvine, CA
(949) 223-3100
 |
pH controller
The Type 8205 directly links with a range of process valves specifically designed for the control of acids and caustic fluids to create high-accuracy pH control systems. Applications include food and beverage, pharmaceutical, electroplating and swimming pool engineering. The unit features a 4-20 mA output signal of process pH value, two pulse outputs and one alarm output. The output signals control valves or pumps directly by means of standard output impulses that vary in frequency and duration in accordance with the user's parameters and the desired pH value set point for the process.
Burkert USA
Irvine, CA
(949) 223-3100
Evaporator
The Thermo Oxidizer Series 2 dry chamber flash wastewater evaporation system eliminates the need to haul wastewater and the problems of corrosion and slurry removal. The system evaporates wastewater leaving a dry ash in a coated ceramic chamber. It utilizes any BTU of the wastewater for fuel savings and can use used oil as fuel.
RGF Environmental
West Palm Beach, FL
(561) 848-1826
 |
Fluorothermoplastic
The flame-retardant properties of Dyneon THV 500 fluorothermoplastic make it appropriate for FM 4910 applications where it is highly effective for use in semiconductor equipment doors, windows and other fab building design areas. The optically clear material can be manufactured in a variety of thicknesses while maintaining its clarity and without taking on a yellow tint. According to the manufacturer, it features excellent chemical resistance and can be used at temperatures up to 125 degrees Celsius.
Dyneon LLC
Oakdale, MN
(651) 737-6700
HDPE drum
The FluoroPure Advantage trilayer HDPE drum offers purity in transporting microelectronic-grade chemicals to advanced semiconductor fabs. The drum is blowmolded in three separate layers. Assembled in an ISO Class 6 (Class 1000) cleanroom, the blowmolded design enables the use of different material characteristics for each layer of the finished product. According to the manufacturer, this design provides safety and purity with excellent particle and trace metal performance.
Entegris Inc.
Chaska, MN
(612) 448-8193