Issue



New Products


09/01/2000







CO2 monitor

The CEA 144 wall-mounted, continuous infrared carbon dioxide gas monitor offers ranges of 0-2000 ppm, 0-5000 ppm, 0-2 percent and 0-5 percent. The unit includes linear 0-1 VDC and 4-20 mA outputs, is easy to install and operate and is available with an optional contact closure relay. According to the manufacturer, the product is applicable for use in food-related industries, breweries, mushroom growing, greenhouse horticulture, welding, office ventilation systems, cooling systems, hazardous environments and laboratory and research projects.
CEA Instruments Inc.
Emerson, NJ
(201) 967-5660

Framing components

Specifically designed and certified for cleanroom use, the aluminum structural framing components provide an alternative to stainless steel for custom tables, carts, workstations and other structures. These standard, modular products have been independently tested and certified as meeting Federal Standard 209E and ISO 14644 by the Fraunhofer Institute for Production Technology and Automation. The components include strut profiles of various sizes, brackets, connectors, casters, hinges and other hardware. Where grooves are essential to the design they are covered by protective strips.
Bosch Automation Products
Buchanan, MI
(616) 695-0151

Carbon filter

The RIGA-CARB/PH carbon filter combines high gas phase adsorbency with minimal dusting characteristics. The 12-inch deep pleated media filter with peripheral header is suitable for any IAQ application where high adsorbency is required and where space and pressure limitations exist, according to the manufacturer. The filter can be installed in filter holding frames for built-up banks, in side-access housings or in existing track-type housings and OEM units.
FARR Company
El Segundo, CA
(310) 727-6300

Electronic time delay unit

Click here to enlarge image

The trapped key power isolator offers direct drive operation, a failsafe and monitored integral solenoid lock and failsafe timer or stop motion detection. The ETD electronic time delay unit offers single key out or two keys out functionality, rundown and key-free LED or NEON indicators, and a weatherproof stainless-steel dustcap. Additional features include an integral 4-pole isolation switch, 24 VDC, 110 VAC or 230 VAC solenoid options and replaceable code barrels. The product comes in an IP65 (NEMA 4) enclosure or panel-mounted version and conforms to EN292, EN1088, IEC947 5-1 and GSET-19.
Scientific Technologies Inc.
Fremont, CA
(510) 608-3400

Airlock

The ROM-Airlock is based on a patented flow principle due to the superposition of low-pressure fields. Because of extremely low internal pressure drop, energy costs are low, according to the manufacturer. The product features high-efficiency dedusting performance due to high tangential forces. The standard unit comes with solid glass doors (consisting of safety glass), a HEPA filter, which corresponds to filter class U 15, and a stored program control unit.
ROM
Stuttgart, Germany
+49-711-1393340

Cleaning system

The two-part CMP Tungsten Slurry Cleaning System comprises TX8606 SCS 20 tugnsten slurry cleaner and TX8606 SCS 100 final wipedown. The cleaner dissolves and removes ferrous oxide deposits created from tungsten slurry. The final wipedown component (Honeycomb 10 polyester wipers pre-wetted with 3 percent TexPure solution) removes the slurry cleaning agents and any traces of ferrous oxide created from the slurry. The three-part CMP Oxide Slurry Cleaning System comprises the TX8065 SCS 10 CMP oxide slurry cleaner, TX4403 ScourWipe and TX8608 SCS 100 final wipedown. The use of ScourWipe is recommended for removal of exceptionally hard deposits of oxide slurry.
Texwipe Company LLC
Upper Saddle River, NJ
(800) 648-9473

Wrist strap tester

Model 250 is a battery-powered, lightweight instrument that can be placed on the workbench or carried by supervisory personnel to efficiently check the strap and wearer or strap only. Visual and audible indicators indicate pass/fail status and battery low circuitry assures accurate measurement and reliable performance.
Electro-Tech Systems Inc.
Glenside, PA
(215) 887-2196

Protective eyewear

The uvex skyline is 10mm slimmer than the company's uvex skyper, making it appropriate for a broad range of facial profiles. Features include impact-resistant polycarbonate wraparound lens design, molded-in nose bridge, side shields and an integrated brow guard. It includes adjustable spatulite temples that provide a close, customized fit as well as a choice of lens tints and coatings. The product meets both ANSI Z87.1-1989 and CSA Z94.3-1992 standards.
Uvex Safety
Smithfield, RI
(800) 343-3411

UVC emitter

Click here to enlarge image

The extended-length UVC emitter is designed to keep coil and drain pans clean and kill the microbes that grow in and circulate through HVAC systems and processing equipment. With a 30-inch tube length, the DE 301 is well suited to a number of applications. In food manufacturing applications, it can eradicate the microbes that contaminate food and beverage products and sometimes shorten their shelf life. Used for infection control, the UVC emitter provides effective and efficient sterilization of a range of microorganisms, from cold and flu viruses to microbes that cause tuberculosis and Legionnaire's Disease, according to the manufacturer.
Sterile-Aire Inc.
Cerritos, CA
(562) 467-8484

Floor mop

For use in aseptic processing, pharmaceutical, bio-technological and other regulated facilities, the PolyGen IR polyester mop is gamma irradiated, double bagged and validated sterile 10-6. According to the manufacturer, the herringbone weave of the looped strands enables optimum absorbency with no exposed edges to guard against particulate. The mop can be laundered and holds up to steam sterilization.
Micronova Manufacturing Inc.
Torrance, CA
(310) 784-6990

Gas leak detector

The battery-operated TG-5000KA detects and locates the source of leaks from tools or valves, inspects incoming gas cylinders and provides temporary monitoring for maintenance personnel. The unit measures arsine, phosphine, diborane and silane concentrations from 0 to 1.99 ppm with 0.01-ppm resolution and responds to three time TLV concentrations in less than 10 seconds, according to the manufacturer. Other features include a local LCD readout, audio/visual alarm indicators and 0 to 10 mV DC output port for use with an auxiliary recorder.
PureAire Monitoring Systems Inc.
Rolling Meadows, IL
(847) 788-8000

Ball screws

Cleanroom and vacuum-compliant ball screws are assembled, packaged and nitrogen purged inside a laminar flow ISO Class 5 (Class 100) cleanroom environment. The assemblies are also lubricated, bagged and sealed to eliminate contamination and enhance shelf life. Products available cover both inch and metric sizes, preloaded and non-preloaded ball nuts, accuracy grades, size and lead combinations, cut-to-length and finished machined and with/without wipers, flanges and end blocks. Also available are custom cleanroom hollow and telescoping screws and stainless steel and chrome-plated assemblies.
Thomson Industries Inc.
Port Washington, NY
(516) 883-8000

Gas delivery system

MegaBIP technology delivers consistent, ultra-high purity gas through a hassle-free purifying system contained inside a gas cylinder. According to the manufacturer, by using a two-port valve arrangement in combination with an internal check valve, the integrity of the purifier media is maintained at all times. A fully integrated non-return valve prevents any contaminants from being backfilled into the purifier, while a dual-port fill/withdrawal arrangement ensures that gas flows only one way through the purifier bed.
Air Products and Chemicals Inc.
Allentown, PA
(610) 481-5971

Fluorescent lighting

The Model 13 Plus Steady Lite illuminator features and ESD-safe housing, cord and lamp and provides variable intensity control using an 85kHz driver. The driver is equipped with a flicker-free dimming range from 100-10 percent. The circular fluorescent light style provides 360 degrees of uniform shadowless light. Applications include electronic assembly, medical, laboratory and semiconductor microscopy and machine vision applications.
Stocker & Yale Inc.
Salem, NH
(603) 893-8778

Electrostatic monitor

Click here to enlarge image

The Model 540 monitors the performance of air ionizers that are used in critical operations associated with semiconductor, LCD, electronic assembly and other processes where static charge accumulations pose a threat to production yield and product quality. The product uses a technique that requires less than 0.1 picoampere of ion current to be collected from the ion field to achieve full accuracy, stability and indicate ionizer output balance. An analog voltage output provides a signal for a facility monitoring system or for use as a feedback signal to control the ion balance of the ionizer. A DPM and a bar graph display offer local presentation of the monitored voltage.
Trek Inc.
Medina, NY
(716) 798-3140

Chemical delivery system

The 220-liter capacity ChemGuard bulk chemical delivery system is compatible with electronic chemicals used in chemical vapor deposition processes, including Tetraethyl Orthosilicate, Trimethylborate, Trimethylphosphite and Tetramethylsilane as well as other chemicals. The system features stainless steel piping and large flow capacity suitable for the requirements of high-purity, high-volume fab-wide chemical supply. An ultrasonic empty sensor allows 99.99 percent of the bulk chemical to be used.
Air Products and Chemicals Inc.
Allentown, PA
(610) 481-3673

For immediate response go to www.onlinecenter.to/cr and request information by inquiry number, advertiser or by product code.