New Products
07/01/2001
 |
ESD shirt
Integrity Xport is a knitted shirt for ESD environments. The 100 percent spun polyester knit shirt wicks moisture away from the skin and then quickly dissipates it throughout the fabric, leaving the wearer dryer and more comfortable in the work environment.
Precision Fabrics Group Inc.
Greensboro, NC
(336) 510-8000
Mass flow transmitter
Series 504FT in-line thermal convection mass flow transmitter has received CENELEC safety approval for industrial gases. It incorporates the all-welded thermal sensors with a miniature "in-the-head" microprocessor circuit, including a large LCD display, 20-button keypad and software menus.
Kurz Instruments Inc.
Monterey, CA
(831) 646-5911
Foot-operated dispenser
The EZ Step dispenser eliminates cross-contamination and provides a portable, cost-effective alternative for sanitation engineers. One step on the depression foot pedal delivers a fully atomized, pre-measured application of Alpet E3 Sanitizer or E2 Antimicrobial Foaming Soap. The unit can be placed on production floors, production lines and in areas where sinks may not be readily available.
Best Sanitizers
Penn Valley, CA
(888) 225-3267
Autoranging meter
Model 880 autoranging resistance meter tests surface, point-to-point and point-to-ground resistance in accordance with ESD industry specifications for packaging, work surfaces, flooring and other materials. The product uses a parallel bar electrode design and has a measurement range of 103 to 1012 ohms with an accuracy of ±10 percent. A tri-color, 12-LED array indicates the resistance of the material in ohms and characterizes the material as conductive, dissipative or insulative.
Electro-Tech Systems Inc.
Glenside, PA
(215) 887-2196
 |
Pneumatic pump
A Series Inert Pneumatic pumps are air operated and available fabricated from all PTFE wetted parts as well as a choice of other materials. The pumps are compatible with a range of media, including sludges, acids, alkalis, solvents, emulsions, resins, powders and aqueous solutions. They are offered in five basic models with port sizes ranging from 1/4-inch NPT to 2-inch NPT. Flow capacities (in water) range from a maximum output of 2.8 GPM to 130 GPM. Maximum lift (suction) is 27 inches mercury with maximum delivery pressure up to 70 PSI.
Clark Solutions
Clinton, MA
(800) 253-2497
 |
UPW analyzer
FasTOC is designed for ultrapure water (UPW) reclaim
euse applications. It uses continuous flow-through analysis in conjunction with a patented stopped-flow dynamic end-point detection system. According to the manufacturer, the product provides accurate TOC results in waste UPW water streams, reported within seconds. The continuous analysis system is calibrated every 2 to 4 minutes with data from stopped-flow measurements. The system can display a bar graph presentation of trend information.
Anatel Corp.
Boulder, CO
(303) 442-5533
Flooring
The XHP flooring system can be applied to new or old concrete floors to create an abrasion- and chemical-resistant surface that can be used in cleanrooms, aircraft hangers and automotive repair and service shops. According to the company, the surface cleans easily, is impervious to grease, oil and other common automotive fluids, and cushions dropped tools, parts and equipment from damage. The four-component system consists of a water sealer, a high-performance primer, an epoxy undercoat and a polyurethane topcoat. Options include a nonskid surface and embedded colors in the topcoat that create a logo or other decorative effect.
Perma-Tech Inc.
Cleveland, OH
(216) 663-7200
Digital MFC
The digital MFC incorporates a reliable piezo valve that features springless and total metal design, which means no particle creation and dead volume reduced to a maximum. A "zero drift sensor" uses thin-film technology that includes a pure platinum layer of 50 angstroms. Reportedly, drift specification drops from 0.2 percent to 0.1 percent F.S. per year. Multidimensional calibration reduces temperature coefficient from 0.05 percent to 0.01 percent F.S. between 20 and 60 degrees Celsius.
Qualiflow
Fremont, CA
(860) 871-0401
 |
Anti-fatigue mat
Approved for use in every level cleanroom, the Dycem Anti-Fatigue mat is designed to reduce fatigue and help prevent cumulative stress disorder when cleanroom work requires standing for prolonged periods. The mat is low profile to reduce tripping hazards and has a non-slip base. Additionally, it is static dissipative, non-particulating, non-outgassing and silicone and DOP free. The mat is available in black or gray and in a variety of sizes or as a continuous roll.
Dycem Ltd.
Warwick, RI
(401) 738-4420
Dehumidifier
Designed to handle dehumidification in applications requiring handling 150 cfm to 1000 cfm, the DryLine 2001 product line can stand alone or be used in conjunction with HVAC systems in both new construction and retrofits. The units have both heating and cooling as well as the dehumidification features. Air inlets have standard integral rain hoods and filter sections and offer a variety of ducting configurations.
DryKor
Fayetteville, GA
(678) 817-0299
 |
Tacky mat
Designed to provide protection in areas that require a greater degree of contamination control, the 6000M10 Super Kleen Tacky Mat consists of 10 disposable poly foam layers. A pressure-sensitive surface picks up all types of dirt and dust from shoes, wheels and casters. The mat fits into a plastic frame that is double contoured for trip-free movement and wheeled equipment. Each sheet has a bounce-back memory so that maximum effectiveness is restored after each step. A fresh surface can be exposed by peeling off the contaminated surface. It is available in seven sizes.
Liberty Industries Inc.
East Berlin, CT
(860) 828-6361
Gloves
A reusable/washable sealed cleanroom glove is fully breathable and comfortable for the user. It can be adapted for use in pharmaceuticals, food preparation, medical and some chemical applications. According to the manufacturer, the Lavitech glove is sealed in such a way that it is virtually resistant to rupture.
Techstyles Inc.
New York, NY
(212) 688-3300
 |
Optics gas purifier
The GateKeeper optics gas series of purifiers is designed for photolithography applications. According to the manufacturer, the purifier extends the life of optics used for DUV lithography by removing the contaminants found in N2 and clean dry air. The system operates at ambient temperatures of -40 degrees to 150 degrees Fahrenheit, requires no heat or power and does not release hydrocarbons.
Aeronex Inc.
San Diego, CA
(858) 452-0124
Conductive ink
The CircuitWriter is a precision conductive ink that applies instant traces on most surfaces such as epoxy, glass, plastic or metal. It draws traces on circuit boards, repairs defective traces, makes jumpers and shields electronics. CircuitSealer is available to provide protective conformal coating over the traces. Both are available in a 7-ml pen format as well as in 59-ml and 354-ml liquid dispensers.
CAIG Laboratories Inc.
Poway, CA
(858) 486-8388
 |
VHP decontamination
The Vaporized Hydrogen Peroxide (VHP) M1000 modular continuous decontamination system meets additional needs of research and aseptic manufacturing users. When it is integrated into an HVAC airflow system it enables continuous duty operation and reduces overall cycle times. The system can be customized with either a Siemens or an Allen-Bradley programmable logic control and consists of three modules. The VHP MD Series is for low-temperature sterilization of packaged medical devices and other products of aseptic manufacturing. The company's VHP 1000 ED (enhanced design) represents the next generation of the VHP 1000 and is expected to provide optimal operational uptime and other features.
Steris Corp.
Mentor, OH
(440) 354-2600
 |
Plastic bulk container
An all-plastic intermediate bulk container (IBC) is molded as a single, plastic unit to eliminate the potential for metallic leaching to contaminate the high-purity acids, solvents and ultra-pure water used in the semiconductor and other high-tech manufacturing operations. According to the manufacturer, the Unitote aids chemical manufacturers in shipping the acids and solvents with metallic particle impurities meeting the 1ppb purity specifications required for the wet etching and cleaning processes. It is available in 275- and 330-gallon capacities.
Meese Orbitron Dunne Co.
Saddle Brook, NJ
(800) 829-3230
 |
Hydride gas sensor
Model CM98-411 hydride gas sensor module is a continuous-duty stationary monitor for detection of hydride gas in the range of 1 to 50 ppm. The unit has a green LED to indicate that it is on and in a safe condition and a red LED to light when in an alarm condition. A 1-amp relay will activate when the gas concentration exceeds 5 ppm hydride gas.
Sierra Monitor Corp.
Milpitas, CA
(408) 262-6611
Roll door
Clean-Roll is a high-speed door designed for food processing applications and is reported to exceed a combination of USDA, FDA, NSF and ISO standards. Its fast open and closing speeds help to minimize the spread of airborne pathogens. According to the manufacturer, high-speed operation also improves productivity and helps maintain a more constant temperature. All metal components are made of stainless steel and can be washed down entirely.
Rytec Corp.
Jackson, WI
(262) 677-9046
 |
Gloves
PowerFlex and PowerFlex Plus gloves offer cut, abrasion and puncture resistance. Both styles are ergonomically designed to provide fit and comfort. The uncoated back enables air to circulate thereby keeping hands cool and dry. The fully coated thumb provides added protection. The PowerFlex gloves feature a soft, gray, seamless poly/cotton liner that is palm-dipped with a textured, natural rubber coating. The PowerFlex Plus gloves have a seamless Kevlar knit lining that also is palm-dipped with a textured, natural rubber coating.
Ansell
Coshocton, OH
(800) 800-0444
Industrial mat
In addition to the camouflage look, the Barrier BattleMat has an exclusive two-ply poly backing that prevents liquid penetration and provides a non-slip surface. Able to absorb oil, water, coolants, solvents, acids and bases, the product draws moisture into its center layer from its resilient, scratch-resistant upper layer. The impermeable bottom layer keeps those liquids from leaking out to the floor. The camouflage pattern conceals spills and drips. The mat is available in 30 inch x 50 foot and 30 inch x 5 foot unperforated rolls.
Sorbent Products Co. Inc.
Somerset, NJ
(732) 302-0080
Particle counter software
Particle Vision Online V2.0 is Windows-based software that transforms sensor data into a meaningful vision of a manufacturing process or cleanroom facility. Designed for air and liquid particle counters, the software enables users to enter measurement names in his/her local language. The optional Mirage utility enables the user to use photos or drawings to represent the process or facility. When used in the Windows NT environment, the software can be readily validated, fulfilling CMP requirements for security and change control.
Pacific Scientific Instruments
Grants Pass, OR
(800) 866-7889
 |
Gas leak detector
Model Q200 Leakmeter detects sulphur hexafluoride in high-voltage switchgear, air-conditioning components, torpedoes, helicopter rotor blades, fume cupboards and hoods. Features include a high sensitivity of 1x10-9 cc/sec and a non-degradable sensor. The unit is equipped with a 20-character alphanumeric display, audio alarm output and a long-life battery. An RS-232 interface port is provided.
iTi Qualitek Inc.
Billerica, MA
(800) 550-8930
Benchtop plasma system
The M4L RF plasma processing system is suited for surface modification and cleaning of organic, metallic and composite substrates. Applications include precision cleaning, adhesion enhancement and surface modification of polymers. The Windows-based 10.4-inch color touch screen interface offers fully automatic control, multi-step recipes, real-time graphic display and real-time SPC monitoring of all plasma parameters. The aluminum chamber features a high-conductance KF 40 port, isolation valve and shielded view port.
MetroLine
Corona, CA
(909) 371-2500