New Products
04/01/2001
Gas monitor
Available in both portable and fixed configurations, the line of environmental gas monitoring systems can detect a range of gases, including CO2, NOx, O2, VOCs, toxics and LEL flammables and fuels. Typical applications include leakage, area, personnel protection and process monitoring.
Neutronics Inc.
Exton, PA
(610) 524-8800
|
Flow filtration system
The benchtop Maxim system is intended for the development of tangential flow filtration processes for scale-up, production of small batches of biopharmaceuticals and scale-down investigations. Key components include a 10L glass reservoir with ultrasonic level sensor, high-performance pump, pressure and temperature sensors, retentate flow meter, retentate and drain diaphragm valves and a choice of optional cassette holders. A quaternary diaphragm Quattroflow pump enables smooth, accurate control of flow rates to 1000 liters per hour at feed pressures up to 6 bar (90psi).
Pall Biopharmaceuticals
East Hills, NY
(516) 484-5400
Imaging software
Advanced Evaluating software for the Camsizer digital particle size analyzer precisely measures the shape of particles for characterization of powders and bulk materials. Users can receive information on parameters such as absolute lengths, length/width ratios, symmetry and roundness. New measurement models make it possible for the Camsizer to produce data that closely matches sieving without the need for calibration curves, reference distributions or fitting routines, according to the manufacturer.
Horiba Instruments
Irvine, CA
(949) 250-4811
|
Mat dispenser
The Pig Mat Tablet Pack provides a method of storing and dispensing absorbent mats for controlling leaks and spills. The tablet has a pop-up tab for hanging anywhere the mats are needed for easy access and retrieval. The mats absorb oils, coolants, solvents, water and most chemicals. Two versions are available10 heavy-weight pads or 20 light-weight padsin two sizes: 14315.5 inches or 20315.5 inches. Each pad is perforated.
New Pig Corporation
Tipton, PA
(814) 684-0101
|
Machine leveling mounts
Jacmount Model PRGI INOX adjustable levelers feature stainless-steel studs and bodies with a selection of rubber or neoprene pads to meet specific machinery vibration dampening and isolation requirements. The mounts use a patented interlocking stud that screws into the body, cannot pull out accidentally and provides spherical support with a ±4 degrees range of motion to compensate for sloping or uneven floors. Sizes range from 51mm to 132mm diameter. Price ranges from $25 to $150 each.
Airloc division of Clark-Cutler-McDermott Company
Franklin, MA
(508) 528-0022
|
Combination tester
The Ohm-Stat CT-8900 automatic data logger now offers HID and CASI-RUSCO proximity readers. The improved software can inform managers automatically via e-mail of employees who fail a test or else did not test. The product can be used to test smocks, wrist straps or footwear simultaneously and individually. The tester can display the actual values in ohms for 5000 employees in each department.
Static Solutions Inc.
Marlborough, MA
(508) 480-0700
|
Wrist strap
The static-dissipative ESD wrist strap is a metal expansion band and buckle encapsulated with a permanently static-dissipative polymer. The band comes in three sizes and is guaranteed to eliminate static failures in cleanroom and manufacturing areas. According to the manufacturer, the buckle band will not flake or cause static electricity failures due to tribogeneration. The product is available in various colors, different cord lengths and different snap configurations.
Static Solutions Inc.
Marlborough, MA
(508) 480-0700
Hand lotion
Formulated to counter the harshness of chemical agents, Aquacream has application for anyone whose hands are exposed continuously to adhesives, coatings and inks. After washing hands thoroughly, the user rubs the lotion in the palms of his hands then spreads it evenly to coat the entire surface of hands, wrists and other areas that may have been exposed to chemical substances. The user then rinses his hands with running water and pats them until thoroughly dry. According to the manufacturer, the treated skin becomes smooth, moist and soft within a few minutes.
ADM-Tronics Unlimited Inc.
Northvale, NJ
(201) 767-6040
|
Mini gas detector
The MD-16 is a series of single-channel, wall-mounted continuous detectors that monitor different toxic gases in either low or high PPM levels. The standalone gas monitors are offered in weatherproof NEMA 4X enclosures. Built-in audio and visual alarms are activated in less than eight seconds in the presence of most hazardous gas levels. Auxiliary outputs and LED lights indicate cell failure, power failure and warning alarm. The danger alarm has a relay contact that can activate external devices.
CEA Instruments Inc.
Emerson, NJ
(201) 967-5660
Toxic gas detector
Chlorine and Hydrides gases have been added to the MDA scientific brand XP Chemcassette product. The Chemcassette colorimetric technology is a method of toxic gas detection used in the semiconductor fabrication process. An XP Chemcassette is capable of running for three months without interruption. According to the manufacturer, the hydrides product meets the proposed 3 PPB TLV level of Arsine currently being reviewed by the American Conference of Governmental Industrial Hygienists (ACGIH).
Zellweger Analytics
Lincolnshire, IL
(847) 955-8200
|
Sight flow indicators
Anderson-Midwest sight flow indicators are available for medium-pressure processing. Two models (100MP and 300MP) handle a maximum pressure of 150 psig. Both models are available in 1.5- and 2-inch sizes and feature bronze bodies, tempered glass windows, ABS impellers and Viton gaskets. NPT(F) connections are standard, but BSPP or BSPT threads are optional. The 100MP is priced from $59.50 and has a single window. The 300MP is priced from $78.50 and has a double window for viewing on either side of the connection.
Dwyer Instruments Inc.
Michigan City, IN
(219) 879-8868
|
Motorized impeller
The TMK has an external rotor motor mounted inside the impeller, where it takes up minimal space and benefits from the cooling provided by the impeller's airflow. According to the manufacturer, the assembly is dynamically balanced to ensure smooth, vibration-free operation. Five sizes are available, ranging from 11 to 17.7 inches in diameter, and providing flows to 5000 cfm and pressures to 4.5-inch wg. Motors are industrial duty, totally enclosed, with ball bearings, and are 100 percent speed controllable. Most standard and three-phase voltages are available.
Continental Fan Manufacturing Inc.
Buffalo, NY
(800) 779-4021
NIR analyzer
The Luminar 3075 is a diffuse reflectance, on-line NIR analyzer for analytical measurements and control on IBCs where a cable or fiber-optic connection are not applicable, for example. The system practically locates a complete AOTF-NIR high-performance spectrometer right on the moving blending vessel. Vibrations, dust or ambient light have no influence on the system performance. Collected data and spectra can be used to control the blending device and/or transmitted to the system computer or server for reference data logging and further analytical purposes.
Brimrose Corporation of America
Baltimore, MD
(410) 931-7200
Modular conveyor system
The modular concept of the EM conveyor enables simplified engineering and ordering as well as reduced assembly time. With four basic module types to choose from, the system can be used to connect machinery or built together to create larger systems. Modules are available in seven standard configurations in lengths up to eight meters. The modules are delivered in pre-assembled units.
FlexLink Systems Inc.
Bethlehem, PA
(610) 954-7000
|
Robot
The turboscara SR6 and SR8 feature a payload capacity of 8 kg (17.5 lbs.), are easy to program and network and feature a pick-and-place cycle of 0.5 seconds. The SR6 has a reach of 600 mm (23.6 in) and the SR8 has a reach of 800 mm (31.5 in). Features include PC-based controls, an on-board vision system, integrated Windows interface and real-time programming. Cleanroom and dustproof models are available.
Bosch Automation Products
Buchanan, MI
(616) 695-0151
Stainless-steel conveyor
The main applications of the XA stainless-steel conveyor systems are for installations in the pharmaceutical, medical device, personal care, food and packaging industries where inspections, ergonomics and thorough cleaning are key requirements. The raised-chain construction offers no crevices where dirt can accumulate. It can be wiped down and the 83mm chain lifts for inspection and cleaning on all straight sections. No drilling is required for body assembly, legs, raised chain bed or bracketry.
FlexLink Systems Inc.
Bethlehem, PA
(610) 954-7000
Thin-film analyzer
Acousto-optic tunable filter (AOTF) film and thin-film analyzers are designed for measuring chemical and physical properties on a range of substrates and coatings. Applications include thickness of organic lacquer or lubricant on metallic foils, tin-plate, sheet steel, metallized polymers and similar products. The Luminar 2020/3020 is totally insensitive to ambient light, which eases installation requirements in the production environment. The optical design eliminates interference fringes.
Brimrose Corporation of America
Baltimore, MD
(410) 931-7200
|
Platens
Cast aluminum bake and chill platens are intended for wafer processing applications. They utilize a high-density mineral-insulated heating element formed to provide a specific heat profile and cast onto 99.7 percent pure aluminum. Cooling tubes of various materials can be run systematically with the heat pattern for uniform chill requirements. According to the manufacturer, temperature uniformity across the surface of the platens can achieve ±1 percent of the maximum operating temperature. Helium leak test specifications of 13108 cc/s are performed to guarantee integrity of the complete assembly.
Durex Industries
Cary, IL
(847) 639-5600
PETG jar
The 150ml size heavy-wall PETG jar features a wide profile shape and an 83-400 thread finish. The jar is available in clear, transparent, opaque and spray frosted finishes and can be custom-colored to meet user specifications. Silk screening and hot stamping are available.
Nadel Industries LLC
Port Chester, NY
(914) 937-5141
Data logger
The Cox Tracer electronic data logger features models with LED or LCD, a humidity model, multiple temperature ranges and a high degree of accuracy and reliability. According to the manufacturer, the price for this multi-featured model has been greatly reduced.
Cox Technologies Inc.
Belmont, NC
(704) 825-8146
|
Work gloves
Available in sizes from small to XXL, the breathable leather gloves offer protection from rough objects, sparks and heat. They are abrasion resistant and provide cushioning from blows in heavy-duty work require- ments. Cotton gloves protect workers' hands and delicate product surfaces. Synthetic gloves protect workers against solvents and chemicals, abrasions, cuts and punctures. Other offerings include unsupported gloves and string knit gloves.
CCP Industries
Highland Heights, OH
(800) 553-7979
Electric linear drives
The OSP-EBHD heavy-duty belt-driven linear p actuator provides compact dimensions, modular construction and application flexibility. Featuring a rigid aluminum profile and a fully integrated roller guide, the unit has high load and bending moment capacity in all plains. The product is available in three sizes (25, 32 and 50 mm) and is produced in any stroke length up to 7000mm.
Hoerbiger-Origa Corp.
Glendale Heights, IL
(630) 871-8300
|
Filter elements
Custom filter elements can be fabricated using specific materials to absorb gases such as arsine, boron trifluoride, boron trichloride and hydrochloric acid or to trap particles down to 0.1 micron. Utilizing 2.75-inch diameter 3 4.5-inch or 9.5-inch high filter element shells that fit their standard vacuum inlet and exhaust traps, they can be used in any combination. The products feature materials such as stainless steel and copper gauze, molecular sieve to trap gases and vapors, activated charcoal for organic vapors, activated alumina to neutralize acids and absorb oils, Sodasorb for acetic acids, pleated polypropylene 2, 5 and 20 micron and polyester to operate up to 165 degrees Celsius, depending upon pressure.
Mass-Vac Inc.
No. Billerica, MA
(978) 667-2393