New Products
03/01/2001
Capsule filter assembly
The 10-inch size gamma-irradiatable Kleenpak Nova capsule filter assembly features an integral positive action vent and drain valves. The self-contained, sanitary filters are intended for critical filtration applications such as the sterilization of pharmaceuticals, biopharmaceuticals, biologics, diagnostic reagents, serum, tissue culture media and culture media components. According to the manufacturer, key benefits of the product include high radiation resistance, low extractables, integral positive action vent/drain valves and high flow rates and throughputs.
Pall BioPharmaceuticals
East Hills, NY
(516) 484-5400
 |
Pallet
A custom "U-shaped" pallet fits underneath and moves wafer cleaning/polishing machines. The pallet has a four-zone regulation control to each caster (X & Y axis guide wheels), a low-profile aluminum extrusion and a quick-attach/detach handle.
AeroGo
(800) 426-4757
 |
Mass flow meter
The 760S/780S UHP ultra-high-purity thermal mass flow meters provide self-diagnostic and field-adjustment features as well as the ability to confirm or field-validate the meter's calibration and measurement accuracy. According to the manufacturer, the microprocessor-based transmitter integrates the functions of flow measurement, flow-range adjustment, meter validation and diagnostics in an explosion-proof housing. The meter is designed for gas distribution service in semiconductor fabs, pharmaceutical production and other ultra-clean processes.
Sierra Instruments Inc.
Monterey, CA
(831) 373-0200
 |
Pressure transmitter
The LPM/LPX 1000 Series will tolerate condensate on both sides of the sensing element without becoming unstable. The sensors utilize a proprietary Variable Inductance Technology and offer standard accuracy of 0.5 percent FS. Standard ranges are 0.1, 0.25, 0.5, 0.75 and 1 inch H2O in 2-wire, 4-20mA; or 3-wire, 1-5 Vdc outputs. Excitation voltage is 12-30 Vdc. An optional Local Loop-powered scaleable LED display is available.
Druck Inc.
New Fairfield, CT
(203) 746-0400
 |
High-temperature flowmeter
Mounted horizontally, vertically or upside-down, the HFF series require neither inlet nor outlet straight plumbing. The instruments withstand temperatures up to 400 degrees Fahrenheit and pressures up to 3500 psig. According to the manufacturer, the flowmeters deliver an accuracy of ±2.5 percent across the middle third of their scale. Three models are available: HFH-2-05 with a scale of 0.5-5.0 GMP, HFH-2-10 with a scale of 1-10 GPM and HFH-4-25 with a scale of 5-35 GMP. Units are priced from $275.
Dwyer Instruments Inc.
Michigan City, IN
(219) 879-8000
 |
Electric cylinders
Well suited for applications with a high concentration of airborne contaminants, the N2 series offers an improved anti-rotation guide flange system, smaller and more economical limited switches, free customized stroke length and a selection of factory-engineered options, according to the manufacturer. The products provide thrust to 2670 N (600 lbs.), speed to 760 mm/s and stroke to 420 mm. Four motor types are offered.
Industrial Devices Corporation
Petaluma, CA
(707) 789-1000
 |
Lockout/tagout line
Lockout hasps, valve covers, ball and butterfly lockouts, circuit breaker lockouts and lock-a-switch lockouts comprise a line of lockout/tagout products. Production safety personnel use these products to prevent accidents that could be caused by the unexpected start-up of equipment or the uncontrolled release of energy.
North Safety Products
Cranston, RI
(401) 943-4400
 |
Air-flow modeler
For optimizing HVAC systems, Flovent 3.1 software features an 'Explorer-style' browser and new solver technology offering significantly faster solution times. An enhanced CAD interface makes it easier to import geometry from CAD tools, and a new 'Command Center' module provides for efficient parametric studies and distributed processing. LACI and LMA can be calculated and plotted directly during post processing. Other enhancements include Contamination Removal effectiveness diagnostic tool, a heat exchanger 'SmartPart,' a multi-grid solver, simplified gridding and a Flo/MCAD module. Price starts at $19,500.
Flomerics Inc.
Southborough, MA
(508) 357-2012
 |
Inspection system
The FXS-160.40 X-ray inspection system is designed for the PCB manufacturing industry and is well-suited for off-axis inspection of planar devices. According to the manufacturer, the system is assembled according to a modular manufacturing principle—with x, y and z axes manipulation, tilt and rotate features and the company's X-ray tube. The detector can be rotated by 360 degrees and angled up to 50 degrees for complete oblique angle viewing without sample repositioning. The "high-brilliance" X-ray tube design provides image resolutions to less than 2 micrometers with geometrical magnifications up to 200x at any inspection angle.
FeinFocus USA Inc.
Stamford, CT
(203) 969-2161
 |
Circulating bath
The CC245 refrigerated and heated circulating bath automatically switches between air and water cooling. The unit is suitable for a variety of laboratory applications that require heating and cooling from -40 to +200 degrees Celsius. Features include a programmable controller, digital and analog interface, visual and audible alarms and connection for external temperature sensor.
Caron
Marietta, OH
(740) 373-6809
PTFE membrane
The Poro-Tex family of customizable expanded polytetrafluoroethylene (ePTFE) materials for medical and laboratory uses offers uniform porosity in pore sizes from 5 to 0.05 microns. The films are suitable for use in high-performance liquid chromatography, micro-filtration, venting media, test strip blotters and other uses in which the filtering of gases and liquids or wicking of liquids is required.
DeWAL Industries Inc.
Saunderstown, RI
(401) 789-9736
 |
Hose storage station
The HSU sanitary hose storage stations are designed for wall mounting and hold several hose assemblies from 0.5 to 2 inches in the vertical position to allow total drainage. The unit stores hoses, clamps and gaskets and conforms to FDA and 3A regulations. Featuring electropolished and passivated stainless steel construction, the unit measures approximately 6 inches square by 5.13 inches deep. Four models hold various combinations of sanitary clamp hose assemblies and accessories. Price is $145 each, including mounting hardware.
Integra Companies Inc.
Bedford, MA
(781) 275-2520
 |
Low-outgassing tape
Arclean 8906 has a permanent adhesive on one side and a cleanly strippable adhesive on the other side. The permanent low-outgassing adhesive is exposed upon removing the white polyester film release liner. Arclean 8906-61 includes a non-silicone polyester release liner protecting the strippable adhesive coating. According to the manufacturer, both products eliminate contamination and labor costs associated with adhesive residue during rework and also minimize HDD system crashes due to contamination. The bonding tapes are acrylic acid-free and feature ultra-low total VOCs and low extractable ions.
Adhesives Research Inc.
Glen Rock, PA
(717) 235-7979
 |
Flowmeter
Series RSF rotatable flowmeters provide fast turnaround direct readings of air and water on the same instrument. The polycarbonate tubeshield, which helps protect the borosilicate glass flowtube, is marked with an airflow scale on one side and a water flow scale on the other. To switch from one 127mm scale to the other, the user simply rotates the shield. Models can be configured for either vertical in-line or panel mounting as well as with or without valves. Maximum airflow rates are from 5 scfm to 30 scfm and maximum water flow rates are from 1.2 GPM to 5 GMP.
Dwyer Instruments Inc.
Michigan City, IN
(219) 879-8000
 |
Vacuum gauge
The DigiLine digital gauges include Piezo, Pirani, Piezo/Pirani and Bayard-Alpert/Pirani along with controllers for single and multiple gauge heads. The digital signal can be read directly into a PC or PLC. The products come with Profibus interface capabilities or an optional DeviceNet converter for implementation into an existing system controller. According to the manufacturer, all gauges offer a rugged metal housing, a choice of two serial interfaces and simple calibration through PC or Pfeiffer Vacuum controllers.
Pfeiffer Vacuum Inc.
Nashua, NH
(603) 578-6500
 |
Eyewash system
The Deluge line of plumbed emergency showers and eye/face washes offers emergency drenching and flushing. All products are made of stainless steel then powder coated for durability in harsh and corrosive environments. According to the company, the shower heads deliver full and complete body coverage, while the eye/face wash outlets direct smooth aerated water across the eyes and face to wash away contaminants. Two combination models are available: Model 940-00 combination shower and eye/face wash and Model 950-00 combination eye/face wash with foot actuator. Eye/face washes are available in four models: Model 960-00 floor-mounted, Model 970-00 floor-mounted with foot actuator, Model 980-00 wall mounted and Model 990-00 wall-mounted with foot actuator.
Fendall
Arlington Heights, IL
(847) 577-7400
 |
Chemical pressure transducer
Designated the PC-501 series, the transducers are for applications in the semiconductor, food and pharmaceutical industries. The diaphragm of the sensor, which is in contact with the media, is treated with a 0.1mm coating of Teflon and the housing in contact with media is constructed of all Teflon (PTFE). The series is available in dead-end or flow-through configurations, with a variety of fitting types. According to the manufacturer, accuracy is specified as ±25 percent full scale with a pressure range from 25 psig to 200 psig.
Pureron U.S.A. Inc.
Arleta, CA
(818) 775-0381
Airborne particle counter
The Met One R2313/R2315 particle counters offer a NEMA 4X IP66 type enclosure for pharmaceutical and bio-technical environments where exposure to chemicals such as solvents and disinfectants is common. According to the manufacturer, using a sample rate of 1 cfm, the counters give statistically good evaluations of cleaner environments such as ISO Class 5. The exterior metal components, including the box, are manufactured from 316L stainless steel. Extensive use of gaskets and O-rings prevents intrusion of dust and fluids into the counter enclosure.
Pacific Scientific Instruments
Grants Pass, OR
(541) 472-6500
 |
High-speed dispenser
The Millennium M-2010 dispensing system delivers high-speed and highly accurate dispensing for surface mount applications. It can be configured with the DJ-2100 DispenseJet non-contact head or the DV-7000 Heli-flow pump. The system comes with Fluidmove for Windows NT software. Pipelined fiducials speed up visual processing to improve throughput.
Asymtek
Carlsbad, CA
(760) 431-2678
 |
Filters
Filters are made of polypropylene with 74-, 149- or 177-micron screens, and 3/16-inch or 1/4-inch I.D. tubing can be adapted. Male or female threads or luer quick releases for removing and cleaning or replacing are available. According to the manufacturer, the filters protect mechanisms while cleaning fluid drawn through the tubing. Check valves can be added to operate as a foot valve. The offsetting feet in the filter assure that liquid passage can not be blocked.
Industrial Specialties Mfg. Inc.
Englewood, CO
(303) 781-8486
 |
Ball valve system
Type 265X modular ball valve system offers a variety of customized temperature, pressure, level and flow control products. Two basic versions are available: A standalone on/off unit with single or double action or a complete continuous process control valve system with the Type 8630/31 TOP control head unit. Applications include food and beverage processing, water treatment and water distribution systems, chemical and process engineering and general processing industries.
Burkert Contromatic Corp.
Irvine, CA
(949) 223-3100
Static decay meter
Model 406D is a two-part system consisting of a Faraday cage, which houses the non-contacting sensor and sample holding electrodes, and the control unit, which houses the power supply, analog meter readouts, timer circuitry and user controls. According to the company, the product meets the test requirements for static charge dissipation as required by applicable DoD, NFPA and EIA test specifications. The system can be used in research and development or quality control applications.
Electro-tech Systems Inc.
Glenside, PA
(215) 887-2196
 |
Datalogger
Flash Link comes in a variety of models for temperature and temperature/humidity, with combinations of external and internal probes. In addition to the rugged water-resistant ABS case, 8K non-volatile memory and direct printer port connection, the product features a green "On" and red "Alarm" LED indicators and a replaceable, one-year battery. The product's Program Manager operates on Windows/Windows NT with customizable features including file naming and programmable data fields.
DeltaTrak Inc.
Pleasanton, CA
(510) 467-5940
Monitor
The M100 provides continuous monitoring of multiple ground points at workstations or within process equipment. The product offers either 8 or 16 channel ground monitoring with audible and red/green LEDs per channel for standalone operation and a digital output for direct interface with the manufacturer's multiplexing software system. The product can detect low level reference ground problems, AC spikes or complete ground loss.
Novx Corporation
San Jose, CA
(408) 998-5555
 |
Quick-disconnect couplings
For high-flow, ultra-pure aggressive chemical fluid applications, the ChemQuik CQN08 series features a patented non-spill design that enables safe, instant line disconnects and a metal-free, spring-free flow path. The couplings are made of ultra-pure virgin PTFE and feature Chemraz seals, which minimizes extractable contaminants, making them well suited for most wet process chemicals used in semiconductor, pharmaceutical and laboratory applications. They are designed to operate within a pressure range of 0 to 80 psig and a fluid temperature range of 0 degrees Fahrenheit to 150 degrees Fahrenheit.
Colder Products Company
St. Paul, MN
(651) 604-4336
Multipolymer compound
Transparent Vu-Stat C-37—a static-dissipataive acrylic multipolymer compound—provides permanent ESD protection to static-discharge-sensitive electronic parts, even after repeated washing, and is not dependent on humidity. It provides 80 percent light transmittance in standard 1/8-inch thicknesses. The compound is used in the packaging and transportation of electronic components as well as cleanroom instruments, medical applications and business machines.
CYRO Industries
Rockaway, NJ
(973) 442-6000
Soles
Quantum soles 2100 series features a non-skid interior for greater wearer comfort and an extended life cycle. The sole's design accommodates cross-industry applications for gamma compatibility or ESD performance. According to the manufacturer, the product returned exceptional test results in the following categories: abrasion resistance, ESD, rapid static decay time, chemical testing, gamma sterility and the wash-n-wear test.
Prudential Cleanroom Services
Irvine, CA
(800) 767-5536
Pressure sensor/switch
Type 8311 is designed to switch a valve, relay or pump and establish a simple On/Off control loop. The unit measures line pressure ranges up to 720 psig and offers accuracy specified at ±1 percent of full scale with 0.25 percent repeatability. A programmable set point can be set locally with the three push buttons on the display or externally from a PLC/computer over a 4-20mA loop. Applications include control of air or fluid pressures in tanks, the monitoring of flow pressures in water treatment systems or control of tank level via hydrostatic head.
Burkert USA
Irvine, CA
(949) 223-3100
 |
Microcentrifuges
Ventilated Models 5520 and 5521 and refrigerated Models 5522 and 5523 have applications in medical, industrial and scientific laboratories. The units can achieve centrifugal force of up to 16,250 xg, a speed range of 1000 to 13,200 RPM and a temperature range (refrigerated models only) from -9-+40 degrees Celsius. Full speed is reached within 15 seconds. Operation modes include automatic time run, momentary spin and continuous operation.
Thermo Forma
Marietta, OH
(740) 373-4763
 |
Particle counter
The KS-17A is compatible with semiconductor process chemicals, including HF from 0.06 micron and measures at the sensitivity limit >0.06 micron as well as >0.1 micron. It operates at 10 ml/min using an external flow controller. The built-in leak detector protects the electronics from etching. The counter operates in two modes: with computer and monitoring software for maximum 20 RION-counters of any type or with the controller KZ-70 and a printer as a standalone system.
Fluid System Partners GmbH
Germany
+49-7250-76-520
 |
Dry strip system
The Enviro advanced dry strip system is a solvent- and acid-free photoresist stripper and residue removal tool. According to the manufacturer, it completely eliminates the need for wet stripping processes that use hydroxyl-amine-based or other types of solvents. This multi-chamber, single-wafer (150-200mm) dry resist and polymer-removal system incorporates both microwave downstream and low-energy RIE plasma. Resist removal is monitored by optical emission with automatic endpoint detection. Six process gases can be used for resist stripping and residue cleaning.
Ulvac Technologies Inc.
Methuen, MA
(978) 686-7550
Air filter
An all synthetic media filter, the Z-Line MR-11 pleated air filter achieves a MERV 11 rating under the ASHRAE Standard 52.2-1999 test method. The product is available in 1-, 2- and 4-inch depths in most standard and special face dimensions.
Glasfloss Industries Inc.
Dallas, TX
(214) 741-7056
Liquid particle counter
Intended for the semiconductor, hard disk drive and flat panel display industries, the ChemShield online LPC system enables fast yield ramps and tight production control of critical liquid systems. Utilizing PCX counter technology, the product offers 32 programmable channels for collection of particle count data over standard RS-485 communications line. It was designed for use with Particle Vision online software, but a software developer's kit is available for end users to develop their own drivers using FIX- and OCX-based protocols.
Pacific Scientific Instruments
Grants Pass, OR
(541) 479-1248
 |
Piping system
The Flo Clear HPC (high purity clear) pipe and fittings product line is molded from polyvinylchloride to ensure system uniformity and consistency in clarity. The products are manufactured from FDA Title 21 and NSF Standard 61 Drinking Water Systems Components-approved materials. Systems are available in sizes from 0.5- through 6-inch IPS sizes with "Streamline" socket style fitting configurations.
Flo Safe Inc.
Kansas City, KS
(800) 517-2002
Personal compliance monitor
An accessory designed for CleanTech Automatic Hand and Glove Washing Systems, CleanTech Personal Compliance Monitor enables employers to measure and review individual employee hand and glove washing compliance. Each employee has a number, which he/she enters into a keypad attached to the system. The system monitors the frequency and duration of the hand or glove wash. At the end of the shift, or whenever the supervisor desires, he can download the data into a plastic key. The key holds a computer chip that downloads into the supervisor's computer. The information can be stored, sorted, printed, reviewed or deleted.
CleanTech Handwashing Systems
Englewood, CO
(800) 932-7707
Gas purifier
GateKeeper model 10M inert gas purifier is used for removing ammonia in high-flow point-of-use applications. The unit removes moisture, oxygen and other contaminants, is hydrocarbon-release free and requires no heat or power. The body is constructed of 316L stainless steel, internally electropolished to 10Ra, and is cleanroom welded, tested and packaged for maximum contamination control. The product is rated up to 1000 slm of NH3. According to the manufacturer, the purifying media does not contain organics that can outgas. In addition to ammonia, arsine, phosphine and silane can be purified with this product.
Aeronex Inc.
San Deigo, CA
(858) 452-0124
Membrane adsorbers
Mustang Q disposable membrane adsorbers remove DNA from downstream processes, offering an alternative to traditional chromatography columns that need packing, cleaning and cleaning validation. Capsules and cartridges, which can be sterilized prior to use, are available in a variety of sizes for process batches of 10-10,000 L. A companion product, Mustang Q Coins and coin holder aid in scaled-down process development and validation. The 0.35-ml bed volume enables the user to examine a variety of process parameters, including host cell protein reduction, with minimum consumption of product.
Pall BioPharmaceuticals
East Hills, NY
(800) 859-3245
 |
Vacuum inlet trap
The MV Multi-Trap Model IC features water-cooled internal coils that provide more than 200 in2 of surface area, along with two customizable filtration stages to condense and collect heavy particles. According to the manufacturer, this high-capacity vacuum inlet and exhaust trap has more than 500 in3 of space to accumulate solids and keep production lines operating longer. It is constructed from all stainless steel and is offered with ISO-80 or ISO-100 flanges.
MV Products, Division of Mass-Vac Inc.
North Billerica, MA
(978) 667-2393
 |
Customizable ePTFE
The Poro-Tex family for medical and laboratory uses, including venting media, microfiltration and analytical equipment, offers uniform porosity in a range of pore sizes from 5 to 0.05 microns. Poro-Tex is used in cleanroom garments and in protective laboratory and medical clothing. Its anti-stick properties make it resistant to particle buildup, and its porosity results in a breathable fabric.
DeWAL Industries Inc.
Saunderstown, RI
(401) 789-9736
Decontamination chamber
The UV-360 decontaminates pre-sterilized materials entering a cleanroom. The operator removes an outer wrap, then places an inner package in the chamber. The package is exposed to the germicidal frequency of ultraviolet light from 45 seconds to four minutes, which reduces the bioburden by up to 6 logs. The package then passes into the asceptic area.
Despatch Industries
Minneapolis, MN
(612) 781-5361
 |
UVC emitter
The Twist Lock UVC Emitter is designed for side access installations in commercial HVAC systems where access to within the plenum is difficult or restricted. Up to six units can by physically and electrically connected, forming a string that slides in and out of an air handler. The product's high output in moving and/or cold air prevents microbial growth and destroys microorganisms.
Steril-Aire Inc.
Cerritos, CA
(562) 467-8484
Tube benders
Two new bench-top tube benders deliver consistent bends from 1-180 degrees for such tubing materials as carbon steel, stainless steel, copper and aluminum in sizes up to 1 inch (30mm) in outer diameter. A manually operated and an electrically operated unit are available. The aluminum benders can be located on a bench or placed on an accessory tripod.
Swagelok Company
Solon, OH
(440) 349-5934
 |
Impeller
Multiflow is reportedly the first fully adjustable blade, mixed flow impeller. According to the manufacturer, the technology incorporates extensively researched and patented impeller blade geometry and a unique adjustment between special inner and outer fixed shrouds. The impeller blade angles are positioned in one of five standard settings for each impeller diameter to give a range of flow/pressure and power alternatives.
Continental Fan Manufacturing Inc.
Buffalo, NY
(800) 779-4021
 |
Quality control cultures
For use in quality control testing of microbiological media, reagents and identification systems, the Bactrol Plus vials of lyophilized microorganisms offer advantages over the Bactrol Disks, which they replace. To use the product, the vial must be reconstituted with 0.25 ml of Trypticase Soy Broth, saline or distilled or deionized water for aerobic bacteria and fungi. Anaerobic and microaerophilic bacteria should be rehydrated with 0.25 ml of Thioglycollate Broth. The resulting suspension is ready for inoculation onto appropriate plating media. According to the manufacturer, cultures contained in the vials are derived from nationally recognized culture collections such as the American Type Culture Collection. The vials are for single use and come packaged in pouches of five vials.
BD Diagnostic Systems
Sparks, MD
(410) 316-4467
Humidity controller
Model 514 automatic humidity controller indicates and controls relative humidity over the entire 0-100 percent range in any sealed chamber. The system comprises the controller, which is housed in an ABS plastic case, and the sensor assembly connected by a five-foot cable. The sensor is mounted inside of the environment to be controlled. The user selects the mode of operation (humidify or dehumidify) and depresses the momentary selector switch to dial in the desired set point. The product compares the set point with the humidity level inside the chamber and will raise or lower the level as required and maintain the selected level to within ±0.5 percent RH, according to the manufacturer.
Electro-Tech Systems Inc.
Glenside, PA
(215) 887-2196
 |
Filter assembly
The PhotoKleen EZD filter assembly speeds filter changeout, minimizes operator exposure and decreases system downtime, according to the manufacturer. It also minimizes photochemical waste. The filter assembly consists of a PTFE head manifold interface and an HDPE capsule filter. The capsule-style design provides top in/top out flow direction and one-step quick filter disconnect.
Pall Corporation
East Hills, NY
(516) 484-3600
Dust collector cage
The dust collector cages are constructed of 11-guage galvanized wire using a 12 vertical wire design, which extends extra life support. Previously, the cages were only available via OEM equipment suppliers. Special venturi/ cage assemblies and 304 and 316 stainlees steel and epoxy-coated cages are also available.
Sly Inc.
Cleveland OH
(800) 200-9530
 |
Seating vinyls
Grade 2 upholstery vinyls have been added to BioFit's line of ergonomic seating for cleanrooms. One series has an abrasion-resistant rating exceeding 75,000 double rubs. The other rates in excess of 60,000 double rubs. The vinyl provides comfort, and the textured surface provides friction between the garmented worker and the chair. Several patterns are available for use in ISO Class 3-6 cleanrooms. The vinyls also meet several nationally recognized flammability standards.
BioFit Engineered Products
Waterville, OH
(419) 823-1089
Portable particle counter
Model 3313 and Model 3315 deliver a 1.0 cfm (28.3 lpm) sampling rate with either 0.3 micron sensitivity (3313) or 0.5 micron sensitivity (3315). Operating from either AC mains or batteries, the Model 3313 can provide continuous monitoring of clean areas, storing up to 2000 readings in its memory buffer. The stored data can be reviewed on the front panel, printed or downloaded to a computer. All six channels are displayed simultaneously on the front-panel display, plus optional environmental sensor data, such as relative humidity, temperature or air velocity. Alarms can be set for all measurements.
Pacific Scientific Instruments
Grants Pass, OR
(541) 479-1248
Dust collector
The unit has been used to collect limestone dust at this process. It uses a settling chamber designed to eliminate the need for a cyclone pre-filter, which is used in similar applications. Dust enters the collector through a high-side inlet, which reduces the settling velocity and lets the dust drop out of the air stream. With less suspended dust, wear on the filter bags is reduced.
Sly Inc.
Cleveland, OH
(800) 200-9526