LED Manufacturing

LED MANUFACTURING ARTICLES



Cambridge Nanotherm appoints Ewald Braith as Non-Exec Director

02/06/2015  Cambridge Nanotherm today announced that Ewald Braith has joined the board as a Non-Exec Director.

Fairchild simplifies dimmable LED lighting design

02/04/2015  Fairchild, a global supplier of high-performance power semiconductor solutions, today announced the FL7734 Phase-Cut Dimmable Single- Stage LED Driver.

Crystal light: New light-converting materials point to cheaper, more efficient solar power

01/30/2015  University of Toronto engineers study first single crystal perovskites for new applications Engineers have shone new light on an emerging family of solar-absorbing materials that could clear the way for cheaper and more efficient solar panels and LEDs.

Ten lighting and LED trends to watch in 2015

01/20/2015  The recent restructuring by major global lighting companies will allow LED makers to raise capital for investments in 2015.

Solving an organic semiconductor mystery

01/16/2015  Berkeley Lab researchers uncover hidden structures in domain interfaces that hamper performance.

SAMCO announces MOCVD demonstration availability for the GaN-550 MOCVD system

01/15/2015  SAMCO has announced MOCVD demonstration capability on a new gallium nitride (GaN-on-Si) system, the GaN-550, from Valence Process Equipment Inc.

MagnaChip offers automotive semiconductor manufacturing process technology

01/13/2015  MagnaChip Semiconductor Corporation, a Korea-based designer and manufacturer of analog and mixed-signal semiconductor products announced today that it has started to offer 0.18um automotive qualified process technology to foundry customers focused on high reliability automotive semiconductor applications.

Shedding light on why blue LEDS are so tricky to make

01/08/2015  Scientists at UCL, in collaboration with groups at the University of Bath and the Daresbury Laboratory, have uncovered the mystery of why blue light-emitting diodes (LEDs) are so difficult to make, by revealing the complex properties of their main component - gallium nitride - using sophisticated computer simulations.

Internet of Things stimulates MEMS market

12/23/2014  The explosive expansion of the Internet of things (IoT) is driving rapid demand growth for microelectromechanical systems (MEMS) devices in areas including asset-tracking systems, smart grids and building automation.

LED chipset demand growth primarily led by LED lighting industry

12/23/2014  The demand for LED chipsets, primarily for the LED lighting market, is forecast to increase substantially through 2018.

Delivering new liquid metalorganic precursors to epi and CVD

12/23/2014  The case is made for delivering liquid precursors from a central delivery system to the epi/dep tool as a vapor of precisely-controlled composition.

LED manufacturing with NMP-free resist stripping

12/19/2014  The use of a semi-aqueous organic film stripper and residue remover that does not contain N-Methyl-2 pyrrolidone (NMP) is compared with current NMP-based chemistry.

Daintree Networks named to "50 Most Promising IoT Companies of 2014"

12/17/2014  Daintree Networks has been named by CIO Review Magazine as one of the '50 Most Promising Internet of Things (IoT) Companies 2014.'

Stacking 2-dimensional materials may lower cost of semiconductor devices

12/12/2014  A team of researchers led by North Carolina State University has found that stacking materials that are only one atom thick can create semiconductor junctions that transfer charge efficiently, regardless of whether the crystalline structure of the materials is mismatched - lowering the manufacturing cost for a wide variety of semiconductor devices such as solar cells, lasers and LEDs.

Pixelligent closes $5.5M in funding

12/11/2014  Pixelligent Technologies, producer of PixClear, nanocrystal dispersions for demanding applications in the Solid State Lighting and Optical Coatings & Films markets, announced today that it closed $5.5 million in new equity funding.

Finding the Achilles' heel of GaN-based LEDs in harsh radiation environments

12/08/2014  Gallium nitride (GaN) based devices are attractive for harsh environment electronics because of their high chemical and the mechanical stability of GaN itself that has a higher atomic displacement energy than other semiconductor materials.

Samsung heats up indoor lighting market with 6W and 8W chip-on-board LED packages

11/13/2014  Samsung Electronics Co. today introduced new chip-on-board (COB) LED package products, the LC006B and LC008B, with six and eight watts of power respectively.

Soraa solves compatibility issues by launching new constant current LED lamp

11/10/2014  Soraa announced today that it has introduced a perfectly compatible version of its award-winning MR16 LED lamp.

China’s LED fabs to install more than 1,000 MOCVD tools from 2014 to 2018

11/07/2014  As a result of cost reduction and performance improvements, LED lighting is becoming more and more competitive in general lighting market.

Intematix appoints Jerry Turin as CFO

10/23/2014  Intematix Corporation, a manufacturer of phosphor solutions for LED lighting, today announced Jerry Turin as the company's Chief Financial Officer.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts