LED Manufacturing

LED MANUFACTURING ARTICLES



LightFair International 2015 call for speakers opens

08/15/2014  The LIGHTFAIR International (LFI) 2015 Call for Speakers opens in a global invitation seeking responses from top lighting and design practitioners looking to participate in the world's largest annual architectural and commercial lighting trade show and conference in New York May 3-7, 2015.

Seoul Semiconductor moves in to the Top 5 global LED manufacturers

08/08/2014  This is a step up from the 2012 ranking of number five global LED manufacturer despite any internal captive revenue.

Apple saved the sapphire industry in 2013 and could transform it in 2014

08/05/2014  In 2013, Apple completely saved the sapphire industry. This year, in 2014, Apple could transform this industry. Will the revolution happen?

Cambridge Nanotherm appoints Ralph Weir as CEO

07/31/2014  Cambridge Nanotherm, a producer of semiconductor heatsink technology, today announced that it has appointed semiconductor industry veteran Ralph Weir as its CEO.

TriQuint becomes first manufacturer to achieve MRL 9 for GaN

07/30/2014  TriQuint Semiconductor, Inc., a RF solutions supplier and technology innovator, announced that it is the first gallium nitride (GaN) RF chip manufacturer to achieve Manufacturing Readiness Level (MRL) 9.

First Chinese supplier breaks into Top 10 LED rankings in 2013

07/16/2014  China’s massive investments in light-emitting diode (LED) manufacturing capacity are paying off, with a Chinese company entering the top ranks of the global market for the first time ever

Lighting accounted for one-quarter of all LED driver IC revenue in 2013

07/16/2014  One out of every four dollars spent worldwide on light-emitting diode (LED) drivers in 2013 was used for lighting applications, illustrating the growing importance of illumination in the LED business.

KLA-Tencor Evolves Inspection and Review Portfolio for 3D Future

07/10/2014  Systems detect and categorize defects that limit yield in advanced IC manufacturing.

How to Drive and Motivate Modern-Day Innovation

07/10/2014  Technology innovation isn’t slowing down. But its steady acceleration isn’t happening spontaneously, and Tuesday’s Silicon Innovation Forum keynote from Professor of Innovation Dr. Bob Metcalfe outline how he believes to effectively drive the complex cycle that is modern-day innovation.

Vacuum Technologies Needed for 3D Device Processing

07/10/2014  Complex effluent management of ALD and CVD processes using novel precursors

Development of Silicon Photonics Devices Discussed in Forum

07/09/2014  Six speakers discussed developments in designing and manufacturing silicon photonics devices in a TechXPOT North session on Wednesday morning.

The Connected Experience: A Manufacturer’s Dream?

07/09/2014  Imagine being able to not only track and address equipment degradation in real time, but also analyze patterns in your factories’ equipment and address potential issues before they even present a problem. It may sound too good to be true, but Microsoft’s Sanjay Ravi explained in Wednesday morning’s keynote that this innovation is becoming available now to manufacturers.

Trends in Next-Generation MEMS Discussed in TechXPOT Forum

07/09/2014  The microelectromechanical system (MEMS) device market is forecast to increase at a compound annual growth rate of 13 percent over the next five years, reaching $24 billion in 2019, according to Jean-Christophe Eloy, president and CEO of Yole Développement.

The End of Scaling?

07/09/2014  Are we reaching the end of scaling? Yes and no. Let me explain.

New Materials Provide Innovation Yet Add Complexity

07/09/2014  If semiconductor materials had a personal Facebook page, its status would be: It’s Complicated.

Standards Industry Leaders Honored at SEMICON West 2014

07/09/2014  SEMI honored eight industry leaders for their outstanding accomplishments in developing standards for the microelectronics and related industries. The annual SEMI Standards awards were announced at the SEMI Standards reception held during SEMICON West 2014.

The Future Looks Incredible, But Not If We Stay The Same

07/09/2014  Micron President Mark Adams’ keynote on Tuesday morning at SEMICON West 2014 was both optimistic and challenging, perhaps even unsettling for companies unused to evolving with the times.

FinFETs and FDSOI Provide Options

07/08/2014  Everybody loves FinFETs! Well, not everybody, really, is behind double-gate or multiple-gate field-effect transistors.

EUV: Coming but Not Here Yet

07/08/2014  Extreme-ultraviolet lithography is making progress! Well, check that. EUV technology is progressing, yet it remains uncertain when its insertion into volume production of semiconductors will occur.

3DICs Have Finally Arrived

07/08/2014  Intel, Samsung Electronics, and Taiwan Semiconductor Manufacturing have made their moves into three-dimensional semiconductors. Now it remains to be seen how the rest of the semiconductor industry will make the transition to 3DICs.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts