Manufacturing

MANUFACTURING ARTICLES



Holst Centre, imec and CARTAMUNDI join forces to create the near field communication chip of the future

11/19/2014  Holst Centre, set up by the Belgian nanoelectronics research center imec and the Dutch research institute TNO, and Cartamundi NV have announced a collaboration to develop ultra-thin flexible near field communication (NFC) tags.

STMicroelectronics, AKM, InvenSense and Bosch share 75% of the consume inertial combo market

11/19/2014  Combo sensors continue their growth in a market expected to reach US$ 1.4 billion in 2019 overcoming discrete sensors.

mCube named MEMS Start-Up of the Year at MEMS Executive Congress

11/13/2014  mCube, provider of the world’s smallest MEMS motion sensors, today announced the company secured three awards at last week’s MEMS Executive Congress for its significant innovations in MEMS and sensors

Cavendish Kinetics secures funding to accelerate the growth of the RF MEMS market

11/11/2014  Cavendish Kinetics, the provider of high-performance RF MEMS tuning solutions for mobile and wearable devices, today announced the closing of a $7 million funding round as well as the appointment of Gilles Delfassy to its board of directors.

MEMS Industry Group announces first open-source Algorithm Community

11/06/2014  MEMS Executive Congress -- Karen Lightman, executive director of MEMS Industry Group (MIG), today announced the first open-source algorithm cooperative, Accelerated Innovation Community (AIC), during her opening remarks at MEMS Executive Congress US 2014.

'Nanomotor lithography' answers call for affordable, simpler device manufacturing

11/04/2014  Nanoengineers at the University of California, San Diego recently invented a new method of lithography in which nanoscale robots swim over the surface of light-sensitive material to create complex surface patterns that form the sensors and electronics components on nanoscale devices.

Apple and Samsung drive adoption of next-generation sensors

11/03/2014  Propelled by the race between Apple and Samsung to enhance their mobile products with cutting-edge sensor technology, the market for sensors in cellphones and tablets is set to nearly triple from 2012 through 2018, according to IHS Technology.

STMicroelectronics tops five billion MEMS sensors shipped

10/23/2014  Beyond gaming systems, smartphones, tablets, navigation systems, and other widely adopted applications, ST’s sensors have also been used in thousands of other useful, fun, and valuable applications.

Finalists announced for MEMS Executive Congress US 2014

10/23/2014  Six companies selected from a pool of applicants will compete in MEMS Industry Group's (MIG)'s MEMS & Sensors Technology Showcase at MEMS Executive Congress.

Mergers, acquisitions reshape the automotive semi supplier landscape

10/22/2014  Capped by last week’s announcement that Qualcomm Inc. would buy CSR PLC, the automotive semiconductor industry recently has been undergoing a wave of merger and acquisition (M&A) activity that has shaken up the competitive order of the market.

MEMS Industry Group goes to the 'Shark Tank' for MEMS and sensor-based products

10/20/2014  MIG announces finalists for Elevator Pitch Session at MEMS Executive Congress US 2014.

Wearable sensor market to expand sevenfold in five years

10/16/2014  Driven by rising demand for fitness and health monitoring features as well as by improved user interfaces, shipments of sensors used in wearable electronic devices will rise by a factor of seven from 2013 through 2019

Rudolph introduces new acoustic metrology and defect inspection technology

09/18/2014  Rudolph Technologies has introduced its new SONUS Technology for measuring thick films and film stacks used in copper pillar bumps and for detecting defects, such as voids, in through silicon vias (TSVs).

Oxford Instruments launches 3rd annual Indian nanotechnology seminars in Kolkata and Delhi

09/18/2014  Oxford Instruments is hosting its third series of annual seminars for the nanotechnology industry in India in November.

Analog Devices releases high-temperature MEMS gyroscope

09/03/2014  Analog Devices, Inc. today introduced the first and only MEMS gyroscope specified to withstand temperatures of up to 175 degrees Celsius commonly encountered by oil and gas drilling equipment.

MEMS Industry Group hosts 10th annual MEMS Executive Congress US

08/28/2014  MEMS Industry Group (MIG) will host MEMS Executive Congress US 2014, an annual business conference and networking event for the MEMS and sensors industry, November 5-7, 2014 in Scottsdale, AZ.

The industry's first foundry business for MEMS utilizing thin-film piezoelectric elements

08/28/2014  ROHM has recently established a process for MEMS utilizing thin-film piezoelectric elements, and implemented the industry's first foundry business that integrates product design and manufacturing processes, from wafer pulling to mounting, in order to meet a variety of customer needs.

MEMSIC introduces the world's first monolithic and wafer level packaged 3D-axis accelerometer

08/15/2014  MEMSIC, Inc., a MEMS sensing solution provider, announced today the availability of its MXC400xXC, the world's first monolithic 3D accelerometer, and also the first 3D accelerometer to utilize WLP technology.

Global pressure sensors market is expected to reach $9.36B in 2020

08/14/2014  The global pressure sensors market was valued at $6.53 billion USD in 2013, growing at a CAGR of 6.2% from 2014 to 2020 to account for $9.36 billion USD in 2020.

Eco-friendly "pre-fab nanoparticles" could revolutionize nano manufacturing

08/13/2014  A team of materials chemists, polymer scientists, device physicists and others at the University of Massachusetts Amherst today report a breakthrough technique for controlling molecular assembly of nanoparticles over multiple length scales that should allow faster, cheaper, more ecologically friendly manufacture of organic photovoltaics and other electronic devices.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts