Metrology

METROLOGY ARTICLES



SEMI advocates for the industry in Washington

09/10/2014  With changes coming in Washington, SEMI has important work ahead supporting the innovators and job creators of this country.

SEMI wins request for etch equipment export control review

09/09/2014  Major milestone in longstanding push to remove etch equipment from U.S. export control list.

Gas applications in lithography

09/08/2014  Lithography is a key enabling process with very demanding requirements. Shrinking feature sizes will raise the bar even further.

GLOBALFOUNDRIES adds Louis Lupin as Chief Legal Officer

09/04/2014  GLOBALFOUNDRIES, a provider of advanced semiconductor manufacturing technology, announced today that Louis “Lou” Lupin has joined the company as senior vice president and chief legal officer.

SRC TECHCON 2014 Conference to feature speakers from GLOBALFOUNDRIES, LinkedIn, High Point University

08/25/2014  The TECHCON 2014 conference hosted by Semiconductor Research Corporation (SRC), the university-research consortium for semiconductors and related technologies, will feature immediate past GLOBALFOUNDRIES CEO Ajit Manocha among the list of executive speakers at the Sept. 7-9 annual event.

Order activity for semiconductor equipment holds steady in July

08/21/2014  North America-based manufacturers of semiconductor equipment posted $1.41 billion in orders worldwide in July 2014 (three-month average basis) and a book-to-bill ratio of 1.07, according to the July EMDS Book-to-Bill Report published today by SEMI.

The growing semiconductor market in India

08/14/2014  The semiconductor industry in India is estimated to grow from $10.02 billion in 2013 to $52.58 billion in 2020 at CAGR of 26.72%, according to Research and Markets new report the "Semiconductor Market in India 2014 - 2020."

Strong growth in second quarter 2014 silicon wafer shipments

08/12/2014  Worldwide silicon wafer area shipments increased during the second quarter 2014 when compared to first quarter area shipments according to the SEMI Silicon Manufacturers Group (SMG) in its quarterly analysis of the silicon wafer industry.

SEMATECH and CNSE/SUNY launch new patterning center

08/07/2014  SEMATECH and the newly merged SUNY College of Nanoscale Science and Engineering (CNSE) / SUNY Institute of Technology (SUNYIT) announced today they have launched their joint Patterning Center of Excellence.

SEMICON Taiwan 2014 to capitalize on growing market opportunities in Taiwan

08/06/2014  Taiwan is forecast to have the largest regional semiconductor manufacturing equipment and materials capital expenditures in both 2014 and 2015.

A call to provide advanced equipment to growth companies

07/28/2014  Historically, the major semiconductor capital equipment manufacturers have focused on supporting the bigger semiconductor companies at the expense of the smaller ones.

Superfast stress inspection for overlay control

07/28/2014  Tighter overlay requirements are motivating device manufacturers to explore new ways to characterize and manage overlay to improve yield.

A*STAR and industry partners form S$200M semiconductor R&D joint labs

07/24/2014  Four joint laboratories, representing a commitment of S$200m between private and public sectors, were launched today between A*STAR's Institute of Microelectronics (IME), and its 10 industry partners.

VCs still investing in semiconductor technology, but need strategic partners and capital efficiency

07/24/2014  Investors are still looking for differentiated technologies that solve high-value problems in semiconductor manufacturing, or that bring semiconductor technology to disruptive applications in other fields, particularly in the medical and environmental sectors

SEMI: June 2014 equipment bookings at the highest level since May 2012

07/22/2014  North America-based manufacturers of semiconductor equipment posted $1.47 billion in orders worldwide in June 2014 (three-month average basis) and a book-to-bill ratio of 1.09, according to the June EMDS Book-to-Bill Report published today by SEMI.

Process Watch: The 10 fundamental truths of process control for the semiconductor IC industry

07/22/2014  This is the first in a series of 10 installments which will discuss fundamental truths about process control - inspection and metrology - for the semiconductor industry.

CEA-Leti: Monolithic 3D is the solution for further scaling

07/21/2014  Hughes Metras, Leti’s VP of Strategic Partnerships North America, introduced the lead talk at their SemiconWest 2014 Leti Day about monolithic 3D technology as the "solution for scaling."

IBM announces $3B research initiative

07/15/2014  IBM announced it is investing $3 billion over the next 5 years in two broad research and early stage development programs to push the limits of chip technology needed to meet the emerging demands of cloud computing and Big Data systems.

Paradigm shift in semi equipment - Confirmed

07/15/2014  Technology node transitions slowing below 32nm.

KLA-Tencor Evolves Inspection and Review Portfolio for 3D Future

07/10/2014  Systems detect and categorize defects that limit yield in advanced IC manufacturing.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts