Packaging and Testing

PACKAGING AND TESTING ARTICLES



InvenSense to ship over 1B MEMS sensors worldwide

01/06/2015  InvenSense, Inc., a provider of intelligent sensor solutions, announced that since starting shipment of MEMS-based sensors in late 2006, it will reach 1 billion devices shipped in Q1 of calendar 2015.

MEMSensing launches the world's smallest commercial 3-axis accelerometer with SMIC

01/05/2015  MEMSensing Microsystems Co. and Semiconductor Manufacturing International Corporation jointly announced the launch of the world's smallest 3-axis accelerometer MSA330, which utilizes SMIC's CMOS integrated MEMS device fabrication and TSV-based wafer level packaging technologies.

Internet of Things stimulates MEMS market

12/23/2014  The explosive expansion of the Internet of things (IoT) is driving rapid demand growth for microelectromechanical systems (MEMS) devices in areas including asset-tracking systems, smart grids and building automation.

What’s next for MEMS?

12/16/2014  The proliferation of sensors into high volume consumer markets, and into the emerging Internet of Things, is driving the MEMS market to maturity, with a developed ecosystem to ease use and grow applications. But it is also bringing plenty of demands for new technologies, and changes in how companies will compete.

?System Plus analyzes the world's smallest ?microbolometer-based thermal imaging ?camera core released by FLIR

12/11/2014  Initially focused on the military, uncooled thermal camera sales have grown significantly due to substantial cost reduction of micro bolometers and growing adoption in commercial markets, including thermography, automotive and surveillance applications.

3D TSV begins

12/10/2014  “Engineering samples have already started to ship and preparation is on-going for entering volume manufacturing,” announces Yole.

OCEASOFT harnesses SIGFOX IoT network in Cobalt S3 sensor family for cloud connectivity

12/09/2014  Industrial Internet of Things sensor-monitoring solution opens new vistas in pollution and environmental applications, other remote-sensing sectors.

What to expect from the 3rd Edition of the European 3D TSV Summit

12/04/2014  Interview with SEMI Europe’s Yann Guillou gives attendees a preview of the event.

AXSEM and SIGFOX announce ‘ultra-low-power’ System-on-Chip solution

12/03/2014  AXSEM, a developer of lowest-power radio microcontrollers, and SIGFOX, a developer of cost-effective, energy-efficient Internet of Things connectivity, today announced that AXSEM’s system-on-chip (SoC) with an AX8052 microcontroller has been certified SIGFOX Ready for two-way connectivity.

X-FAB MEMS Foundry wins “Foundry of the Year” Award at MEMS Executive Congress

11/20/2014  X-FAB MEMS Foundry today announced it received the “MEMS Foundry of the Year” award at the Best in MEMS & Sensors Innovation Awards ceremony, as part of the MEMS Industry Group’s 10th annual MEMS Executive Congress held in Scottsdale, Arizona last week.

SCHOTT advances MEMS technology by using HermeS glass wafers with through glass vias

11/19/2014  The international technology group SCHOTT is expanding its HermeS wafers with hermetically sealed, solid through glass vias (TGV) into MEMS applications.

Holst Centre, imec and CARTAMUNDI join forces to create the near field communication chip of the future

11/19/2014  Holst Centre, set up by the Belgian nanoelectronics research center imec and the Dutch research institute TNO, and Cartamundi NV have announced a collaboration to develop ultra-thin flexible near field communication (NFC) tags.

mCube named MEMS Start-Up of the Year at MEMS Executive Congress

11/13/2014  mCube, provider of the world’s smallest MEMS motion sensors, today announced the company secured three awards at last week’s MEMS Executive Congress for its significant innovations in MEMS and sensors

Cavendish Kinetics secures funding to accelerate the growth of the RF MEMS market

11/11/2014  Cavendish Kinetics, the provider of high-performance RF MEMS tuning solutions for mobile and wearable devices, today announced the closing of a $7 million funding round as well as the appointment of Gilles Delfassy to its board of directors.

Sand 9 granted core patent for piezoelectric MEMS microphones

11/10/2014  Sand 9, Inc., a developer of piezoelectric MEMS timing products for wireless and wired applications, today announced that the United States Patent and Trademark Office has granted the company a core patent based on the use of piezoelectric MEMS for a wafer-level, chip-scale packaged microphone.

MEMS Industry Group announces first open-source Algorithm Community

11/06/2014  MEMS Executive Congress -- Karen Lightman, executive director of MEMS Industry Group (MIG), today announced the first open-source algorithm cooperative, Accelerated Innovation Community (AIC), during her opening remarks at MEMS Executive Congress US 2014.

Apple and Samsung drive adoption of next-generation sensors

11/03/2014  Propelled by the race between Apple and Samsung to enhance their mobile products with cutting-edge sensor technology, the market for sensors in cellphones and tablets is set to nearly triple from 2012 through 2018, according to IHS Technology.

MegaChips to acquire SiTime for $200M

10/29/2014  SiTime Corporation, a MEMS and analog semiconductor company, today announced that it has signed a definitive agreement under which MegaChips Corporation, a top 25 fabless semiconductor company based in Japan, will acquire SiTime for $200 million in cash.

IMAPS Award Winners for 2014

10/24/2014  At the IMAPS (International Microelecronics & Packaging Society) meeting last week, several of their key annual awards were given out.

STMicroelectronics tops five billion MEMS sensors shipped

10/23/2014  Beyond gaming systems, smartphones, tablets, navigation systems, and other widely adopted applications, ST’s sensors have also been used in thousands of other useful, fun, and valuable applications.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts