Packaging

PACKAGING ARTICLES



CoolCube 3D transistor stacking improves

06/21/2016  Collaborating to build out design to fabrication ecosystem.

Will packaging make the difference for TSMC?

06/21/2016  Earlier this year, a Taipei Times headline read “New packaging may spur TSMC growth” adding that despite its weak revenue growth guidance for this quarter, TSMC, might see stronger growth from next quarter thanks to its InFO (integrated fan out) packaging technology.

Fan out from niche to mainstream

06/20/2016  When most people in packaging hear the term “Fan Out,” they usually think of the eWLB type of “chips first” fan out process/structure. This was the first of the embedded chips first structures to be taken into volume production by Infineon and ASE in Q1 2009. But this was not the end of the story.

Dialog Semiconductor announces director appointment

06/17/2016  Dialog Semiconductor plc, a provider of highly integrated power management, AC/DC power conversion, solid state lighting (SSL) and Bluetooth low energy technology, today announced the appointment of Nick Jeffery to the company's Board of Directors.

North American semiconductor equipment industry posts May 2016 book-to-bill ratio of 1.09

06/17/2016  North America-based manufacturers of semiconductor equipment posted $1.75 billion in orders worldwide in May 2016 (three-month average basis) and a book-to-bill ratio of 1.09.

What is driving the advanced packaging market in China?

06/16/2016  Driven by a strong semiconductor market outlook and aggressive investment in advanced packaging capability fueled by strong government support, advanced packaging revenue in China is expected to reach US$ 4.6 billion in 2020, against US$ 2.2 billion in 2015.

Imec demonstrates gate-all-around MOSFETs with lateral silicon nanowires at scaled dimensions

06/16/2016  Today, at the 2016 Symposia on VLSI Technology & Circuits, nano-electronics research center imec presented gate-all-around (GAA) n- and p-MOSFET devices made of vertically stacked horizontal silicon (Si) nanowires (NWs) with a diameter of only 8nm.

Imec demonstrates junction-less gate-all-around lateral and vertical nanowire FET devices

06/16/2016  The new GAA-NWFET is a promising candidate for advanced logic & analog/RF applications, and scaled SRAM cells.

Samsung Electro-Mechanics to launch IC packaging business

06/15/2016  Samsung Electro-Mechanics, an electronic parts affiliate of Samsung Group, is preparing to dive into the integrated circuit packaging industry, according to news reports on Monday.

Day 2 at The ConFab 2016: Success in semiconductor growth and fab management

06/14/2016  During the Tuesday morning sessions, ConFab attendees heard from speakers from Mentor Graphics, Intel, Infineon Technologies, Quantum Clean, and Edwards.

Advanced Packaging Forum provides answers at SEMICON West 2016

06/14/2016  Today, SEMI announced that the latest packaging solutions will be the topic of an in-depth session at the SEMICON West 2016 Advanced Packaging Forum - and on display on the exhibition floor.

Efficient hydrogen production made easy

06/13/2016  Sticking electrons to a semiconductor with hydrazine creates an electrocatalyst.

Changing markets drive smarter manufacturing by IC sector

06/13/2016  The changing market for ICs means the end of business as usual for the greater semiconductor supply chain. Smarter use of data analytics looks like a key strategy to get new products more quickly into high yield production at improved margins.

Kicking off #TheConFab2016

06/13/2016  The ConFab 2016 kicked off this morning with speakers from GlobalFoundries, Silicon Catalyst, imec, TechInsights, CEA Leti, and New York Empire State Development.

Global semiconductor sales decrease in April; Annual sales projected to dip slightly in 2016

06/10/2016  The Semiconductor Industry Association (SIA) this week announced worldwide sales of semiconductors reached $25.8 billion for the month of April 2016.

Countdown to Node 5: Moving beyond FinFETs

06/10/2016  A forum of industry experts at SEMICON West 2016 will discuss the challenges associated with getting from node 10 -- which seems set for HVM -- to nodes 7 and 5.

Equipment spending up: 19 new fabs and lines to start construction

06/10/2016  While semiconductor fab equipment spending is off to a slow start in 2016, it is expected to gain momentum through the end of the year. For 2016, 1.5 percent growth over 2015 is expected while 13 percent growth is forecast in 2017.

Cadence and SMIC collaborate on delivery of low-power 28nm digital design reference flow

06/09/2016  Cadence Design Systems, Inc. today announced a collaboration with Semiconductor Manufacturing International Corporation (SMIC) on the delivery of a 28nm design reference flow that incorporates a full suite of Cadence digital products for low-power design.

An interview with Dr. Dongkai Shangguan

06/08/2016  Dr. Dongkai Shangguan is currently the Chief Marketing Officer of STATS ChipPAC. Previously, Dongkai served as the founding CEO of the National Center for Advanced Packaging Co., Ltd. (“NCAP China”), worked for 10 years at Ford Motor Company in various technical and management functions, and for 11 years at Flextronics as Corporate Vice President of Global Advanced Technology.

High Tech U in Taiwan for first time

06/07/2016  The SEMI High Tech U learning program commenced April 20-22 in Hsinchu, Taiwan.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts