Packaging

PACKAGING ARTICLES



SEMI announces Innovation Village at SEMICON Europa 2014

04/09/2014  After the successful premier of a program to connect early-stage companies with strategic investors and venture capitalists (VCs) in the U.S., SEMI is expanding the program to Europe as part of SEMICON Europa 2014 in Grenoble, France (October 7-9).

February semiconductor sales up 11.4 percent compared to last year

04/09/2014  The Semiconductor Industry Association (SIA) today announced that worldwide sales of semiconductors reached $25.87 billion for the month of February 2014, an increase of 11.4 percent from February 2013 when sales were $23.23 billion.

Global Semiconductor Alliance celebrates 20 years of industry collaboration

04/08/2014  The Global Semiconductor Alliance (GSA) is celebrating 20 years of industry collaboration this year.

SEMI reports 2013 global semiconductor materials sales of $43.5B USD

04/07/2014  The global semiconductor materials market decreased 3 percent in 2013 compared to 2012 while worldwide semiconductor revenues increased 5 percent.

ROHM Semiconductor and imec join forces for ultra-low power radio R&D

04/07/2014  Nanoelectronics research center imec and ROHM Semiconductor Co. Ltd., a world-leading supplier of electronic components, announced today that they have entered into a strategic partnership for research collaboration on ultra-low power (ULP) radio technology for small battery-operated wireless devices.

2013: A year in review

04/04/2014  2013 was a record year in terms of semiconductor device revenues; the industry finally exceeded the long elusive $300 billion mark, registering almost 5 percent growth according to the SIA.

The sustainable manufacturing imperative

04/03/2014  While sometimes seen as a social, legal and regulatory obligation, sustainability is increasingly considered a differentiating factor in global competitiveness relative to the technologies and products being provided.

ON Semiconductor to acquire Trusense Imaging, Inc.

04/03/2014  ON Semiconductor today signed a definitive agreement to acquire Truesense Imaging, Inc., a provider of high-performance image sensor devices addressing a wide range of industrial end-markets including machine vision, surveillance, traffic monitoring, medical and scientific imaging, and photography.

SureCore's 28nm silicon tests confirm world leading power efficiency

04/01/2014  SureCore Ltd has today announced that early testing of its innovative low power SRAM design confirms its simulations that deliver in excess of 50 percent power savings over other SRAM technologies.

MACOM announces IP licensing program for GaN-on-Si technology

04/01/2014  M/A-COM Technology Solutions Inc. this week announced an IP licensing program for Gallium Nitride (GaN) on Silicon technology.

Researchers improve performance of III-V nanowire solar cells on graphene

04/01/2014  Researchers at the University of Illinois at Urbana-Champaign have achieved new levels of performance for seed-free and substrate-free arrays of nanowires from class of materials called III-V (three-five) directly on graphene

University of Washington selects Altatech’s CVD system to develop new process materials

03/31/2014  Altatech, a subsidiary of Soitec, has received an order from the University of Washington in Seattle for an AltaCVD chemical vapor deposition (CVD) system whose unique combination of capabilities allows users to develop new process materials with high added value.

SEMATECH announces leadership changes

03/31/2014  SEMATECH, the global consortium of semiconductor manufacturers, announced today that Ronald Goldblatt, vice president of Technical Strategy and Operations, has been appointed by the board of directors as acting president and chief executive officer, effective immediately.

Heat-conducting polymer cools hot electronic devices at 200 degrees C

03/31/2014  Polymer materials are usually thermal insulators. But by harnessing an electropolymerization process to produce aligned arrays of polymer nanofibers, researchers have developed a thermal interface material able to conduct heat 20 times better than the original polymer. The modified material can reliably operate at temperatures of up to 200 degrees Celsius.

eInfochips opens new design services specializing in 16nm geometry

03/26/2014  eInfochips, a semiconductor and product engineering company, today launched design services for chips based on 16nm geometry.

Altera and Intel extend manufacturing partnership to include development of multi-die devices

03/26/2014  Collaboration will optimize integration of 14nm Tri-Gate Stratix 10 FPGAs with heterogeneous technologies into a single system-in-a-package.

Highlights from the IMAPS Device Packaging Conference

03/24/2014  The annual IMAPS Device Packaging Conference in Ft McDowell AZ is always a source for the latest packaging information.

Mentor Graphics acquires Berkeley Design Automation

03/21/2014  Mentor Graphics Corp. today announced that it has acquired Berkeley Design Automation, Inc. BDA addresses nanometer circuit design challenges via its Analog FastSPICE unified verification platform and exceptional vertical-application expertise.

Enabling mobility for IoT with advanced semiconductor technology - at SEMICON Singapore 2014

03/20/2014  SEMICON Singapore will focus on the advanced technology developments to enable mobility for the Internet of Things (IoT).

Applied Materials honored as a 2014 World's Most Ethical Company

03/20/2014  Applied Materials, Inc. today announced that it was named a 2014 World's Most Ethical Company by the Ethisphere Institute, an independent center of research promoting best practices in corporate ethics and governance.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts