Semiconductors

SEMICONDUCTORS ARTICLES



ams breaks ground on NY wafer fab

04/20/2016  ams AG (SIX: AMS) today took a step forward in its long-term strategy of increasing manufacturing capacity for its high-performance sensors and sensor solution integrated circuits (ICs), holding a groundbreaking event at the site of its new wafer fabrication plant in Utica, New York.

Energy harvesting to drive semiconductor sales to $3B by 2020

04/20/2016  The new Semico Research report "Energy Harvesting: The Next Billion Dollar Market for Semiconductors" projects semiconductor sales for this market will reach $3 billion by 2020.

NRL reveals novel uniform coating process of p-ALD

04/20/2016  Scientists at the U.S. Naval Research Laboratory (NRL) have devised a clever combination of materials to reveal that particle atomic layer deposition deposits a uniform nanometer-thick shell on core particles regardless of core size.

UW-Madison engineers fabricate fastest flexible silicon transistor

04/20/2016  Working in collaboration with colleagues around the country, University of Wisconsin-Madison engineers have pioneered a unique method that could allow manufacturers to easily and cheaply fabricate high-performance transistors with wireless capabilities on huge rolls of flexible plastic.

Semiconductor experts chart chip industry's future direction beyond the "Moore's Law" horizon

04/20/2016  Program unveiled for 2016 Symposia on VLSI Technology & Circuits – includes short courses, focus sessions, and panel discussions on "Inflections for a Smart Society" theme.

ESD Alliance, Semico Research sign joint marketing agreement

04/19/2016  The Electronic System Design Alliance (formerly the EDA Consortium) and Semico Research today announced that they have entered into a joint marketing agreement to work together on several business initiatives.

Extended supply chain presents exhibitors with new opportunities at SEMICON West

04/18/2016  Leading innovators in today's integrated electronics supply chain are preparing to showcase their products and services at SEMICON West 2016 on July 12-14 in San Francisco, Calif.

Process Watch: Yield management turns green

04/18/2016  As we celebrate Earth Day 2016, we commend the efforts of companies who have found ways to reduce their environmental impact.

'Odd couple' monolayer semiconductors align to advance optoelectronics

04/15/2016  In a study led by the Department of Energy's Oak Ridge National Laboratory, scientists synthesized a stack of atomically thin monolayers of two lattice-mismatched semiconductors.

IEEE International Electron Devices Meeting announces 2016 Call for Papers

04/15/2016  The 62nd annual IEEE International Electron Devices Meeting (IEDM), to be held at the San Francisco Union Square Hilton hotel December 3 - 7, 2016, has issued a Call for Papers seeking the world's best original work in all areas of microelectronics research and development.

Number of 300mm IC wafer fabs expected to reach 100 in 2016 

04/15/2016  High volume 450mm IC wafer fabs not expected until after 2020.

SEMICON West 2016: New high-speed EtherCAT mass flow controllers from Brooks Instrument

04/14/2016  Celebrating its 70th anniversary, Brooks Instrument will be exhibiting at SEMICON West 2016 with new mass flow controllers (MFC) equipped with the high-speed EtherCAT interface, along with a broad range of other mass flow meters, controllers, vaporizers and capacitance manometers for semiconductor manufacturing.

Samco increases local sales staff for North American, European and Asian locations

04/14/2016  Samco, a Japan-based semiconductor process equipment developer and manufacturer, is employing around 20 more people at its locations in North America, China, Taiwan and Singapore, as well as its subsidiary Samco-UCP in Liechtenstein.

imec and Crystal Solar demonstrate 22.5% nPERT Si solar cells on kerfless epitaxial wafers

04/14/2016  Crystal Solar’s kerfless wafers are a disruptive solution for the solar cell industry, substantially reducing the cost of Si solar cells.

Park Systems sponsors SST webinar on metrology challenges and opportunities for semiconductor market

04/13/2016  Park Systems is sponsoring a webinar entitled Metrology Challenges and Opportunities presented by Solid State Technology Magazine on April 14, 2016 at 10am PST.

Industry stakeholder collaboration helps enable success of next-gen HVM

04/13/2016  As the microelectronics industry becomes more mature and products become more advanced, there is greater emphasis on improving process control deeper within the supply chain.

Tech companies creating strategic platforms to support the Internet of Things

04/12/2016  IHS forecasts that the IoT market will grow from an installed base of 15.4 billion devices in 2015 to 30.7 billion devices in 2020 and 75.4 billion in 2025.

Leti extends collaboration with Qualcomm on CoolCube 3D integration technology

04/12/2016  Leti, an institute of CEA Tech, today announced the continuation of its collaboration with Qualcomm Technologies, Inc., a subsidiary of Qualcomm Incorporated, to develop CoolCube.

Sensors driving next-generation wearable devices

04/12/2016  Last week, IDTechEx gave the opening presentation at the 2016 Korea Summit for Smart Wearable Devices, excellently hosted by KDIA and KSA in Seoul, Korea.

SEMI reports 2015 global semiconductor materials sales of $43.4B

04/11/2016  The global semiconductor materials market decreased 1.5 percent in 2015 compared to 2014 while worldwide semiconductor revenues decreased 0.2 percent.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts