Semiconductors

SEMICONDUCTORS ARTICLES



The ConFab 2017, May 14-17, in San Diego

10/30/2016  I’m delighted to announce that The ConFab, our premier semiconductor manufacturing conference and networking event, will be held at the iconic Hotel del Coronado in San Diego on May 14-17, 2017. For more than 12 years, The ConFab, an invitation-only executive conference, has been the destination for key industry influencers and decision-makers to connect and collab- orate on critical issues.

What is your China strategy?

10/30/2016  Equipment vendors have a lot on their plates now, with memory customers pushing 3D NAND, foundries advancing to the 7 nm node, and 200mm fabs clamoring to come up with hard-to-find tools.

Managing particle flows in process exhaust for safety and profitability

10/28/2016  Solid particles in the abatement exhaust must be properly managed, and in some cases, substantially reduced from the gas stream before it is released into the environment.

Analog Devices acquires Innovasic

10/27/2016  Analog Devices, Inc. today announced the acquisition of Innovasic Inc., a provider of Deterministic Ethernet semiconductor and software solutions.

Power electronics powered by Picosun's batch aluminum nitride

10/27/2016  Picosun Oy, a supplier of advanced industrial ALD (Atomic Layer Deposition) technology, now provides its customers production-scale aluminum nitride batch process with superior film thickness uniformity and fast speed.

Cadence CEO to be awarded Dr. Morris Chang Exemplary Leadership Award

10/27/2016  He will be presented with this achievement award during the GSA Awards Dinner Celebration on Thursday, December 8, 2016, at the Santa Clara Convention Center in Santa Clara, Calif.

Qualcomm to acquire NXP

10/27/2016  Qualcomm Incorporated and NXP Semiconductors N.V. today announced a definitive agreement, unanimously approved by the boards of directors of both companies, under which Qualcomm will acquire NXP.

SMIC standardizes on Synopsys StarRC for signoff parasitic extraction

10/26/2016  Semiconductor Manufacturing International Corporation and Synopsys, Inc. today announced that it has adopted Synopsys' StarRC product as the standard solution for signoff parasitic extraction for its 28nm process technology.

Semiconductor IP market to exceed $8B by 2020, according to Semico Research

10/26/2016  One of the mainstays of the System-on-a-Chip (SoC) market is the continued growth of the 3rd Party Semiconductor Intellectual Property (SIP) market.

Aura Semiconductor raises Series A funding

10/25/2016  Aura Semiconductor, a provider of high performance analog mixed signal solutions, today announced that it has completed Series A round of equity investment from Bay Area based WRV Capital.

Cadence reference flow with digital and signoff tools certified on Samsung's 10nm process technology

10/25/2016  Reference flow enables system and semiconductor companies to accelerate delivery of designs on Samsung's second-generation 10nm process (10LPP).

Synopsys Custom Compiler certified for Samsung's 10nm process technology

10/25/2016  Synopsys, Inc. today announced that its Custom Compiler tool has been certified by Samsung Electronics Co., Ltd. to support their 10-nanometer (nm) LPP (Low Power Plus) process.

SEMICON Europa opens tomorrow in Grenoble, France

10/24/2016  SEMICON Europa will open its doors tomorrow, showcasing the latest product, tools, and technologies for advanced microelectronics manufacturing.

ams schedules 2017 multi-project wafer starts for analog foundry customers

10/24/2016  180nm CMOS and HV-CMOS MPW runs are now manufactured in ams' 200mm fabrication facility in Austria.

Messe München and SEMI Europe announce new alliance

10/24/2016  SEMICON Europa co-locating with productronica and electronica, expanding electronics focus.

Ultralow power transistors could function for years without a battery

10/21/2016  A new design for transistors which operate on 'scavenged' energy from their environment could form the basis for devices which function for months or years without a battery, and could be used for wearable or implantable electronics.

New perovskite solar cell design could outperform existing commercial technologies

10/21/2016  Stanford, Oxford team creates high-efficiency tandem cells.

Researchers find way to tune thermal conductivity of 2-D materials

10/21/2016  Researchers have found an unexpected way to control the thermal conductivity of two-dimensional (2-D) materials, which will allow electronics designers to dissipate heat in electronic devices that use these materials.

Semiconductor equipment bookings continue to outpace equipment billings in new book-to-bill report

10/21/2016  A book-to-bill of 1.05 means that $105 worth of orders were received for every $100 of product billed for the month.

Gigaphoton's EUV pilot light source sets new world record by achieving 5% conversion efficiency

10/20/2016  Gigaphoton Inc., a manufacturer of light sources used in lithography, has announced success in achieving a world record 5% conversion efficiency with 100W of average output in stable operation and a high duty rate of 95%.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts