Wafer Processing

WAFER PROCESSING ARTICLES



Flip chip technology supported by wider adoption of Cu pillar tech

10/01/2015  Flip Chip technology is expected to reach $25 billion market value and wafer demand of 32 million (12” eq. wafers) in 2020, supported by the wider adoption of Cu pillar technology.

Novati Technologies launches advanced integrated sensor platform

09/30/2015  Novati Technologies Inc. announced the availability of an advanced Integrated Sensor Platform, placing a wide variety of sensors onto multi-layer stacks of wafers in order to consume less power and perform significantly faster while reducing overall footprint.

Advantest and D2S partner to tackle CD uniformity errors for advanced photomasks

09/29/2015  D2S announced that it has partnered with Advantest to integrate D2S' Wafer Plane Analysis engine into Advantest's Mask MVM-SEM (Multi Vision Metrology Scanning Electron Microscope) systems.

A different type of 2D semiconductor

09/29/2015  Berkeley Lab Researchers produce the first ultrathin sheets of perovskite hybrids.

X-FAB sets benchmark for low-noise CMOS

09/25/2015  Enhanced XH035 and XH018 CMOS transistors deliver industry-leading performance for highly noise-sensitive applications.

New software update for parametric test system reduces test times by 25 percent

09/24/2015  Tektronix, Inc. announced the release of a major system software update for the Keithley S530 Parametric Test System that can reduce measurement speed by as much as 25 percent.

SUNY Poly announces joint development agreement with INFICON

09/21/2015  The collaboration is expected to advance semiconductor manufacturing processes and lead to the creation of 50 jobs at SUNY Poly statewide facilities.

Dialog Semiconductor to acquire Atmel for $4.6 billion

09/21/2015  Dialog Semiconductor and Atmel Corporation announced today that Dialog has agreed to acquire Atmel in a cash and stock transaction for total consideration of approximately $4.6 billion.

Process Watch: Risky business

09/18/2015  This is the ninth in a series of 10 installments that explore certain fundamental truths about process control--defect inspection and metrology--for the semiconductor industry.

S3S - the conference for IoT technologies

09/18/2015  The upcoming IEEE S3S Conference 2015 in Sonoma, CA, on October 5-8, will focus on key technologies for the IoT era.

Soitec and Simgui announce first 200-MM SOI wafers produced in China

09/15/2015  Soitec and Simgui jointly announced today that the first 200-mm silicon-on-insulator (SOI) wafers have been produced at Simgui's manufacturing facility in Shanghai.

Semiconductor Research Corporation expands benchmarking research program

09/09/2015  Marking an industry first for emerging electronics devices, Semiconductor Research Corporation (SRC) today announced a significant expansion of its benchmarking research.

ASE Chairman Jason Chang receives SEMI award for advancements of copper wire bonding technology

09/08/2015  The SEMI award recognizes Jason’s significant achievements in the development and commercialization of copper wire in the IC assembly process.

MACOM announces milestone in the commercialization of GaN on Silicon technology

09/08/2015  M/A-COM Technology Solutions Inc., a supplier of high-performance analog, RF, microwave, millimeterwave and photonic semiconductor products, announced that it has shipped more than one million GaN-on-Silicon (GaN on Si) RF power devices to date to customers for use in communications, military and other RF applications.

Researchers in Basel develop ideal single-photon source

09/08/2015  With the help of a semiconductor quantum dot, physicists at the University of Basel have developed a new type of light source that emits single photons. For the first time, the researchers have managed to create a stream of identical photons.

Automotive industry now the third largest end market for power semiconductors

09/03/2015  In 2014, the automotive sector significantly outperformed the overall market average for semiconductors.

Intel's Bill Holt awarded Robert N. Noyce Award

09/03/2015  Holt will accept the award at SIA's Annual Award Dinner on Thursday, Dec. 3.

Made from solar concentrate

09/02/2015  Solar cell from Berkeley Lab/University of Illinois absorbs high-energy light at 30-fold higher concentration than conventional cells.

CyberOptics demonstrates new WaferSense and ReticleSense Auto Multi Sensors

09/02/2015  CyberOptics Corporation, a global developer and manufacturer of high precision 3D sensing technology solutions, will demonstrate the first wireless sensor to combine leveling, vibration and Relative humidity (RH) measurement in an all-in-one device at SEMICON Taiwan in Taipei, September 2-4, 2015.

20th annual SEMICON Taiwan 2015 opens today

09/02/2015  SEMICON Taiwan 2015 opened today starting a three-day event drawing over 43,000 attendees from electronics manufacturing.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts