Category Archives: MEMS

February 21, 2011 – BUSINESS WIRE — MEMSCAP (NYSE Euronext: MEMS) (Paris:MEMS), micro-electro-mechanical systems (MEMS) technology developer, completed die-level reliability testing beyond 200 millions cycles on its Thermally Actuated Variable Optical Attenuators. MEMS based Variable Optical Attenuators are gaining momentum and market share over competing traditional technologies in optical networks applications ranging from optical modules protection to the growing segment of Power Management, according to MEMSCAP.

Recent die-level tests on the Thermally Actuated MEMS Variable Optical Attenuator product line confirmed that the MEMS devices operate within all specifications even after 200 millions cycles with all optical, mechanical and electrical properties remaining within their strict initial specifications. The key operating parameters of electrical resistance and power consumption of the units exhibit excellent stability over the full duration of the test.

Capitalizing on its optical MEMS intellectual property (IP) in design and manufacturing, MEMSCAP has developed Thermally Actuated Variable Optical Attenuators in Normally Open and Normally Closed configurations, including different die sizes, with or without metalized backside.

MEMSCAP’s Variable Optical Attenuator dies have been designed to fit most packaging technologies available on the market and are said to exhibit superior optical power attenuation stability in closed loop mode.

Fueled by the demand for faster internet connection and multiservice solutions, investments in existing and new optical network infrastructures are steadily growing to benefit the optical networking industry. Optical system integrators are looking for proven high quality and high reliability components to be safely integrated in complex optical modules operating up to 100 GBits.

Optical telecom markets are growing at a 28% CAGR from 2009 to 2014, as MEMS-based VOAs increasingly displace non-MEMS solutions, said Jérémie Bouchaud, director and principal analyst for MEMS and Sensors at IHS iSuppli (see iSuppli H2 2010 High Value MEMS Market Tracker).

MEMSCAP provides innovative MEMS-based products including components, component designs (IP), manufacturing and related services. More information on the company’s products and services can be obtained at www.memscap.com

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group

February 18, 2011 — A North Carolina State University endowment fund established to bridge pure research and product commercialization for entrepreneurs has awarded a $10k grant to a biomedical engineering project that will use MEMS to make catheters flexible, then stiff, for stent delivery.

The Richard L. and Marlene V. Daugherty Centennial Campus Entrepreneurialism Endowment has awarded the grant to a partnership between a NC State assistant professor in biomedical engineering and a Raleigh cardiologist. Drs. Glenn Walker and Ravish Sachar are planning to use their $10,000 award to develop a prototype for a ‘smart’ catheter.

Currently, catheters used by cardiologists do not offer enough flexibility and strength at the same time. Thus, physicians must use a combination of techniques to expertly place a catheter in the human body in order to successfully treat a clogged artery.

To overcome this problem, Walker, an assistant professor in NC State University’s department of biomedical engineering, and Sachar, a cardiologist with Wake Heart and Vascular Associates, teamed up to develop and commercialize a smart catheter that can be both flexible and strong. The catheter uses micro-electro-mechanical systems (MEMS) technology to electronically modulate catheter stiffness. It will be flexible enough to be maneuvered through winding blood vessels and positioned near the affected area, but it can also be stiffened to allow the delivery of a stent to the lesion site. This reduces the chances of injury to the patient during the procedure by reducing the number of catheters and guide wires that must be used.

The endowment is named after the retired IBM executive who ran the company’s RTP operations for 23 years, and his wife. Daugherty is a trustee of the Kenan Institute at NC State, as well as a board member for NC State’s Entrepreneurship Initiative. Daugherty was also Director of the Research Corporation for NC State’s Centennial Campus and board member of Progress Energy. He received the North Carolina Public Service Award in 1991 and the Raleigh Chamber of Commerce’s A.E. Finley Award in 1994.

Centennial Campus is a research park and technology campus owned and operated by North Carolina University. Home to more than 60 corporate, government and non-profit partners, such as Red Hat, ABB, and the USDA, collaborative research projects vary from nanofibers and secure open systems technology to serious gaming and biomedical engineering. Four university college programs also have a significant presence on campus – College of Engineering, College of Veterinary Medicine, College of Textiles and the College of Education. Learn more at http://www.centennial.ncsu.edu

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group

February 18, 2011 — A North Carolina State University endowment fund established to bridge pure research and product commercialization for entrepreneurs has awarded a $10k grant to a biomedical engineering project that will use MEMS to make catheters flexible, then stiff, for stent delivery.

The Richard L. and Marlene V. Daugherty Centennial Campus Entrepreneurialism Endowment has awarded the grant to a partnership between a NC State assistant professor in biomedical engineering and a Raleigh cardiologist. Drs. Glenn Walker and Ravish Sachar are planning to use their $10,000 award to develop a prototype for a ‘smart’ catheter.

Currently, catheters used by cardiologists do not offer enough flexibility and strength at the same time. Thus, physicians must use a combination of techniques to expertly place a catheter in the human body in order to successfully treat a clogged artery.

To overcome this problem, Walker, an assistant professor in NC State University’s department of biomedical engineering, and Sachar, a cardiologist with Wake Heart and Vascular Associates, teamed up to develop and commercialize a smart catheter that can be both flexible and strong. The catheter uses micro-electro-mechanical systems (MEMS) technology to electronically modulate catheter stiffness. It will be flexible enough to be maneuvered through winding blood vessels and positioned near the affected area, but it can also be stiffened to allow the delivery of a stent to the lesion site. This reduces the chances of injury to the patient during the procedure by reducing the number of catheters and guide wires that must be used.

The endowment is named after the retired IBM executive who ran the company’s RTP operations for 23 years, and his wife. Daugherty is a trustee of the Kenan Institute at NC State, as well as a board member for NC State’s Entrepreneurship Initiative. Daugherty was also Director of the Research Corporation for NC State’s Centennial Campus and board member of Progress Energy. He received the North Carolina Public Service Award in 1991 and the Raleigh Chamber of Commerce’s A.E. Finley Award in 1994.

Centennial Campus is a research park and technology campus owned and operated by North Carolina University. Home to more than 60 corporate, government and non-profit partners, such as Red Hat, ABB, and the USDA, collaborative research projects vary from nanofibers and secure open systems technology to serious gaming and biomedical engineering. Four university college programs also have a significant presence on campus – College of Engineering, College of Veterinary Medicine, College of Textiles and the College of Education. Learn more at http://www.centennial.ncsu.edu

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group

Combining biological sponges with nanotechnology and semiconductors enables Rice University researchers to develop a diagnostic system for various diseases.

Microsponges derived from seaweed may help diagnose heart disease, cancers, HIV and other diseases quickly and at far lower cost than current clinical methods. The microsponges are an essential component of Rice University’s Programmable Bio-Nano-Chip (PBNC) and the focus of a new paper in the journal Small.

Click to Enlarge

At the heart of Rice University’s Programmable Bio-Nano-Chip is a grid that contains microsponges, tiny agarose beads programmed to capture biomarkers. The biomarkers help clinicians detect signs of disease in patients. (Image courtesy of Jeff Fitlow/Rice University)

PBNCs capture biomarkers – molecules that offer information about a person’s health – found in blood, saliva and other bodily fluids. The biomarkers are sequestered in tiny sponges set into an array of inverted pyramid-shaped funnels in the microprocessor heart of the credit card-sized PBNC.

When a fluid sample is put into the disposable device, microfluidic channels direct it to the sponges, which are infused with antibodies that detect and capture specific biomarkers. Once captured, they can be analyzed within minutes with a sophisticated microscope and computer built into a portable reader.

The biomarker capture process is the subject of the Small paper, authored by John McDevitt, the Brown-Wiess Professor in Bioengineering and Chemistry, and his colleagues at Rice’s BioScience Research Collaborative. The microsponges are 280um beads of agarose, a cheap, common, lab-friendly material derived from seaweed and often used as a matrix for growing live cells or capturing proteins.

Agarose captures a wide range of targets from relatively huge protein biomarkers to tiny drug metabolites. Agarose, a powder, can be formed into gels or solids of any size. The size of the pores and channels in agarose can be tuned down to the nanoscale.

The team found that agarose beads with a diameter of about 280um are ideal for real-world applications and can be mass-produced in a cost-effective way. These agarose beads retain their efficiency at capturing biomarkers, are easy to handle and don’t require specialized optics to see. The agarose bead is engineered to become invisible in water.

The challenge, McDevitt said, was defining a new concept to quickly and efficiently capture and detect biomarkers within a microfluidic circuit. The solution developed at Rice is a network of microsponges with tailored pore sizes and nano-nets of agarose fibers.

The sponge-like quality allows a lot of fluid to be processed quickly, while the nano-net provides a huge surface area that can be used to generate optical signals 1,000 times greater than conventional, large devices.

McDevitt and his colleagues tested beads with pores from 45 to 620nm wide. Pores near 140nm proved best at letting proteins infuse the beads’ internal nano-nets quickly, a characteristic that enables PBNCs to test for disease in less than 15 minutes.

The team reported on experiments using two biomarkers, carcinoembryonic antigens and Interleukin-1 beta proteins (and matching antibodies for both), purchased by the lab. After soaking the beads in the antibody solutions, the researchers tested their ability to recognize and capture their matching biomarkers. In the best cases, they showed near-total efficiency (99.5%) in the detection of bead-bound biomarkers.

McDevitt has expected for some time that a three-dimensional bead had greater potential to capture and hold biomarkers than the standard for such tests, the enzyme-linked immunosorbent assay (ELISA) technique. ELISA analyzes fluids placed in an array of 6.5-mm wells that have a layer of biomarker capture material spread out at the bottom.

"The amount of optical signal you get usually depends on the thickness of a sample," McDevitt said. "Water, for example, looks clear in a small glass, but is blue in an ocean or a lake. Most modern clinical devices read signals from samples in flat or curved surfaces, which is like trying to see the blue color of water in a glass. It’s very difficult."

By comparison, PBNCs give the researchers an ocean of information. "We create an ultrahigh-surface-area microsponge that collects a large amount of material," he said. "The sponge is like a jellyfish with tentacles that capture the biomarkers." Nearly all of the antibodies in the agarose beads retain their ability to detect and capture biomarkers, McDevitt said, compared to about 10% in gold-standard ELISA tests (according to previous studies).

PBNC-based disease diagnostics is currently the focus of six human clinical trials. McDevitt will discuss their development at the annual meeting of the American Association for the Advancement of Science (AAAS) in Washington, D.C., Feb. 17-21.

Ultimately, he said, PBNCs will enable rapid, cost-effective diagnostic tests for patients who are ailing, whether they’re in an emergency room, in an ambulance or even while being treated in their own homes. Even better, the chips may someday allow for quick and easy testing of healthy individuals to look for early warning signs of disease.

A video discussing the PBNC, its underlying technology and cost benefits, is available here.

Co-authors of the paper included first author Jesse Jokerst, a National Institutes of Health postdoctoral fellow at Stanford University; postdoctoral students James Camp, Jorge Wong, Alexis Lennart, Amanda Pollard and Yanjie Zhou, all of the departments of Chemistry and Biochemistry at the University of Texas at Austin; Mehnaaz Ali, an assistant professor of chemistry at Xavier University; and from the McDevitt Lab at Rice, Pierre Floriano, director of microfluidics and image and data analysis; Nicolaos Christodoulides, director of assay development; research scientist Glennon Simmons and graduate student Jie Chou. The abstract is available here.

February 17, 2011 – NikkeiPanasonic Corp. (6752) and Seiko Epson Corp. (6724) are leading Japanese companies’ resurgence in the microelectromechanical system (MEMS) market for sectors such as consumer electronics, video game systems, and telecommunications equipment as sensors and switches.

Japanese firms were global leaders back in the 1990s, making such parts as sensors for car airbags. But the 2000s saw major U.S. and European semiconductor companies enter the field, grabbing market share by making massive capital investments and sharply boosting production efficiency. The global MEMS market will grow roughly 140% to 16.46 billion dollars in 2015 from the 6.99 billion dollars of 2009, according to French research firm Yole Developpement.

Swiss firm STMicroelectronics NV has risen to No. 1 in the global MEMS sensor market by leveraging its production capacity and price-competitiveness. The firm’s sensors are used in Nintendo Co.’s (7974) Wii home game console, which takes advantage of a MEMS acceleration sensor.

Panasonic, a major player in MEMS tilt sensors, is leading Japanese companies’ resurgence in the MEMS market, with its sales jumping 67% on the year in 2009. Smartphones are often equipped with multiple MEMS components, including sensors for detecting tilt. The parts are also used in inkjet printer nozzles and automobile electronic stability control systems. Samsung is believed to have already become the world’s No. 1 player in automotive MEMS tilt sensors.

Seiko Epson also holds a high market share in MEMS components for inkjet printers. A subsidiary, Epson Toyocom Corp., is also focusing on development and production of MEMS sensors. Epson Toyocom’s quartz acceleration and tilt sensors offer more accurate readings than their conventional silicon-based counterparts.

Like STMicroelectronics, Omron Corp. (6645) manufactures MEMS using production facilities that can handle 200mm silicon wafers. This gives it an advantage over many of its domestic peers, which use 150mm facilities. Omron makes MEMS pressure sensors.

U.S. firm Knowles Electronics dominates the market for MEMS microphones, commanding a roughly 80% share. One of the companies that supply MEMS chips to Knowles is Sony Corp. (6758) unit Sony Semiconductor Kyushu Corp.

Hosiden Corp. (6804) and TDK Corp. (6762) are working to take market share away from Knowles by introducing smaller products.

New Japan Radio Co. (6911) entered the MEMS microphone market recently.

Yokogawa Electric Corp. (6841) is another Japanese firm with advanced MEMS technology. It is sharply increasing its share of the precision measuring instruments market, thanks in part to its pressure sensors made using its proprietary MEMS technology.

Hitachi Ltd. (6501) incorporates its own MEMS components into some of its medical equipment.

In MEMS-related fields, Sumitomo Precision Products Co. (6355) commands about 70% of the worldwide market for silicon and quartz deep-etching systems, an essential tool for producing MEMS components.

Foreign firms control more than half of the global market for MEMS design software. Among Japanese companies, Mizuho Financial Group Inc. (8411) dabbles in the field via the Mizuho Information & Research Institute. Nihon Unisys Ltd. (8056) unit UEL Corp. also handles such software.

Translated from an article by Nikkei staff writer Tamaki Kyozuka, The Nikkei Veritas Feb. 13 edition

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group

February 16, 2011 — The realization of self-powered microsystems for medical implants, drug delivery, remote monitoring, or safety-driven applications forms the basis behind a new project being run at the UK’s NPL by the Functional Materials Group. The goal is to replace batteries in these applications with an energy-scavenging power supply.

This energy harvesting power supply would eliminate the environmental hazards and costs associated with battery technologies. Energy harvesting covers the scavenging of many low-grade energy sources such as environmental vibrations, human power, thermal sources, wind energy and their conversion into useable electrical energy.

This project is concerned mainly with environmental vibrations and human power, where the transformation of mechanical to electrical energy is used to power small autonomous devices. The conversion can be achieved by various methods; however, the most promising options for MEMS devices include magnetic, piezoelectric and magnetostrictive transformation.

Example applications might include airborne particle detection in massively parallel autonomous sensing systems (motes), medical condition monitoring with embedded active drug delivery systems, and the development of structural health monitoring systems that scavenge innate vibrations for self power.

The global market for microsystems technology is estimated at $35 billion (2002 – Nexus: Market analysis for MST 2000-2005), with biomedical applications estimated at EU12B.There are a wide range of UK companies that would benefit from this understanding of this technology, from healthcare to transport, the energy sector, aerospace and defense sectors, where MST is given a high priority. The expected time frame during which this technology will be demonstrated extends from 2 to 5 years for defense applications associated with the Smart Soldier concept to 3-7 years for domestic appliances (MP3 players with built-in energy scavengers for example).

Knowledge will be shared with all partners onboard the project, whilst the wider community will enjoy open access to the generic metrology output in the form of web-based tools, new pre-normative standards documents, and the work will be further assessed for quality through the peer-reviewed publication process. Case studies will demonstrate the concepts so that organizations not in the materials supply market will gain a better understanding of the benefits associated with energy harvesting.

Read more in the recent edition of NPL’s Environmental Measures at http://www.npl.co.uk/publications/newsletters/

The National Physical Laboratory (NPL) is the UK’s National Measurement Institute and is a world-leading centre of excellence in developing and applying the most accurate measurement standards, science and technology. Read about NPL’s Functional Materials research at http://www.npl.co.uk/advanced-materials/materials-areas/functional/

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group

February 15, 2011 — The University of South Florida received $5.45 million in grants from the Bill & Melinda Gates Foundation to create advanced devices that mimic the human liver to better study the life cycle of the malaria parasite, and to develop effective therapies for the disease.

Malaria may be most vulnerable to attack in the liver stage. Human models fabricated on micromechanical systems could help accelerate the discovery of new drugs or even vaccines for Plasmodium vivax and Plasmodium falciparum, the two most common forms of malaria.

Effective therapeutics funded in the second grant target malaria preventions and cure by a long-term continuous culture system for P. vivax.

Click to Enlarge
Photo 1. A microfluidic device used to create human mimetic tissue models for testing potential malaria drugs.

USF will collaborate with Draper Laboratory on the projects. The dynamic public-private partnership combines the USF Global Infectious Disease Research team’s expertise in malaria parasite biology and human model development with Draper’s extensive experience in tissue engineering and the development of human mimetic in vitro (laboratory) models. Draper Lab has been involved in MEMS research and development since 1984, including multiple biological applications.

To create new models to mimic human body conditions in which malaria parasites replicate, the researchers are using Draper’s prototype microfluidic device technology. The microfluidic device consists of microscope slide-sized unit containing chambers through which fluid flow is maintained by a micro-pump.  It is designed to support complex tissue growth, allowing liver or blood vessel cells to grow in three dimensions while experiencing physiologically relevant forces instead of on the static two-dimensional surface of a petri dish.  This technology, previously unavailable in a lab setting, may also prove useful for screening large volumes of potential anti-malarial agents and evaluating their effectiveness. Also read: MEMS may screen metastatic breast cancer cells by mimicking environment

"The Draper models offer unique microenvironments, so cells grow and function more normally," said Dennis Kyle, Ph.D., professor of global health at the USF College of Public Health. "That’s important because one major roadblock to learning about the liver stage of the malaria parasite has been that the liver cells lose some of their basic functions and no longer metabolize drugs after a few days."

"We cannot eliminate one of the most prevalent causes of malaria in the world — Plasmodium vivax — unless we come up with new drugs or vaccines that target the dormant liver forms of the parasite," Dr. Kyle said. "Current tools– in vitro and animal models are either largely ineffective or cost-prohibitive in predicting which drugs may work best in humans. New human models are the basic building blocks needed to establish strong, credible drug and vaccine discovery programs, not only at USF but at other universities and companies working on new ways to fight malaria."

Dr. Kyle is the principal investigator for a three-year Gates Foundation grant seeking to develop human liver models that could more quickly and accurately test potential drug candidates for vivax and falciparum malaria. Draper Laboratory’s efforts will be overseen by principal investigator Joseph Cuiffi, PhD, of the Draper Bioengineering Center at USF. They are working with John Adams, Ph.D., professor of global health at USF; Jeffrey Borenstein, Ph.D., a Draper physicist and biomedical engineer; and Joseph Charest, Ph.D., a Draper biomedical engineer. The original work on this technology at Draper was funded by the Center for the Integration of Medicine and Innovative Technology of which Draper is a founding member.

Click to Enlarge

Photo 2. Clockwise from left: Principal investigators Dr. John Adams and Dr. Dennis Kyle of USF Health are collaborating on the Gates Foundation-funded projects with Dr. Joseph Cuiffi, principal investigator at Draper Lab.

Dr. Adams is the principal investigator for a three-year Gates Foundation grant that brings together a worldwide network of leading investigators with the skills and resources needed to create long-term blood stage cultures of vivax malaria. This form of malaria has proven particularly difficult to grow and sustain in the laboratory. Dr. Adams is working with Dr. Cuiffi and Dr. Kyle, as well Dr. Jetsumon (Sattabongkot) Prachumsri of the Vivax Research Center in the Faculty of Tropical Medicine, Mahidol University, and the Armed Forces Research Institute in Bangkok, Thailand; Dr. Peter Siba, director of the Papua New Guinea Institute for Medical Research; Dr. Louis Schofield, a Howard Hughes Medical Institute international research scholar at the Walter and Eliza Hall Institute of Medical Research in Australia; and Dr. Osamu Kaneko at Nagasaki University in Japan.

"To be able to replicate and study the entire malaria infection process outside the body will be critical in developing new drugs with the potential to eliminate malaria," said Draper’s Dr. Cuiffi.

Malaria and the liver
Malaria affects 10% of the world’s population, killing nearly one million people a year in developing countries and crippling their economies. In humans, the liver is the first target of the disease once a person is bit by an infected mosquito. The infecting parasites for most types of malaria multiply and rupture liver cells, escaping back into the bloodstream. In vivax malaria, some parasites can remain dormant in the liver for extended periods before infecting the blood.  The parasites, now modified to attack red blood cells, rapidly create more parasites, which spread throughout the bloodstream in waves.

At this initial stage of human infection there are fewer parasites — hundreds or a few thousand in the liver compared to millions once parasites start replicating in the bloodstream. Vivax has the potential to lay dormant in the liver and re-activate months or years after treatment, causing relapses of malaria. While parasites are in the liver, the person does not feel sick. Once parasites enter the bloodstream, disease symptoms emerge. "The drugs available to treat the bloodstream stages don’t work in the liver," Dr. Adams said. "So if you could get rid of parasites in the liver stage, you could essentially prevent vivax malaria and the transmission of infection."

Third, the only drug effective in attacking the liver’s reservoir of dormant malaria parasites to help prevent recurrences of vivax malaria, Primaquine, is risky for widespread use. Administering Primaquine to people with a red blood cell enzyme deficiency, known as glucose phosphate dehydrogenase (G6PD) deficiency, may trigger severe and potentially lethal blood loss, Dr. Adams said. "There’s no good bedside test to identify G6PD-deficient individuals, and, unfortunately, this condition most often occurs in those areas where vivax malaria is endemic."

More information on Draper Laboratory MEMS work is available at http://www.draper.com/mems_background/index.html. Learn more about the University of South Florida at www.usf.edu

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group

February 14, 2011 — Dolomite, microfluidic designer and manufacturer, expanded its range of temperature control systems with the Hotplate Adaptor – Chip Holder H, which allows control over internal temperatures of microfluidic chips without any disruptions to the fluid flow.

Click to Enlarge Click to Enlarge Click to Enlarge

The use of temperature control systems is vital for many applications including nanostructure generation, controlled microreactions, and droplet microfluidics where droplets can be kept at certain temperature to prevent a solidification reaction until the droplets have left the chip.

Holding a microfluidic chip securely in position, the Hotplate Adaptor enables users to pre-heat or post-heat fluids by using the integrated tube heater. Operating over a temperature range up to 100°C, the adaptor is supplied with a removable lid that can be closed to maintain the chip at constant temperatures, which is important for cell-based analytical studies to maintain cell viability. A glass viewing window (22mm in diameter) facilitates microscopic observations.

Quick and easy to use, the Hotplate Adaptor has been specifically developed for the Chip Interface H, and is compatible with Dolomite’s Linear Connector 4-way, 1.6mm tubing and microfluidic chips that have a footprint of 22.5 x 15mm.

Dolomite is pioneering the use of microfluidic devices for small-scale fluid control and analysis, enabling manufacturers to develop more compact, cost-effective and powerful instruments. By combining specialist glass, quartz and ceramic technologies with knowledge of high performance microfluidics, Dolomite is able to provide solutions for a broad range of application areas including environmental monitoring, clinical diagnostics, food and beverage, nuclear, agriculture, petrochemical, cosmetics, pharmaceuticals and chemicals. Dolomite’s in-house micro-fabrication facilities include clean rooms and precision glass processing facilities. For more information please visit www.dolomite-microfluidics.com

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group

Fluidigm prices FLDM IPO


February 14, 2011

February 14, 2011 – BUSINESS WIRE — Fluidigm Corporation priced its initial public offering (IPO) of 5,558,333 shares of its common stock at a price to the public of $13.50 per share. The shares of common stock have been approved to trade on The NASDAQ Global Market under the symbol FLDM.

Deutsche Bank Securities Inc. and Piper Jaffray & Co. are acting as joint book-running managers for the offering. Cowen and Company LLC and Leerink Swann acted as co-managers. Fluidigm has granted the underwriters an option to purchase up to an additional 833,750 shares of common stock to cover over-allotments, if any.

A registration statement relating to these securities was declared effective by the Securities and Exchange Commission (SEC) on February 9, 2011.

This offering is being made solely by means of a prospectus, copies of which may be obtained from: Deutsche Bank Securities Inc., Attn: Prospectus Department, 100 Plaza One, Floor 2, Jersey City, NJ 07311, or by calling (800) 503-4611 or emailing a request to [email protected] or by contacting Piper Jaffray & Co. at 800 Nicollet Mall, Suite 800, Minneapolis, MN 55402, by calling 1-800-747-3924.

Fluidigm develops, manufactures, and markets microfluidic systems for growth markets in the life science and agricultural biotechnology (Ag-Bio) industries. Fluidigm’s proprietary microfluidic systems consist of instruments and consumables, including chips and reagents. Fluidigm actively markets three microfluidic systems including eight different commercial chips to leading pharmaceutical and biotechnology companies, academic institutions, diagnostic laboratories and Ag-Bio companies. For more information, please visit www.fluidigm.com

Company Disclaimer: This press release shall not constitute an offer to sell or a solicitation of an offer to buy, nor will there be any sale of these securities in any state or jurisdiction in which such an offer, solicitation, or sale would be unlawful prior to registration or qualification under the securities laws of any such state or jurisdiction.

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group

February 11, 2011 – PRNewswire — STMicroelectronics (NYSE: STM), semiconductor and MEMS sensor manufacturer, and bTendo Ltd. signed a development and license agreement to jointly develop the world’s smallest pico projector for smart phones and other portable consumer-electronics devices. It will be based on bTendo’s innovative Scanning Laser Projection engine technology and ST’s micro electro mechanical systems (MEMS) expertise, video processing know-how and semiconductor process technology.

Less than 2.5cm3 in volume and below 6mm high, the jointly developed embedded projector solution will offer a focus-free, vivid color, sharp and crisp image, superior to current pico projection solutions. Implementing two MEMS-based micro-mirror-actuation devices within the system’s optical engine, and an advanced video-processing chip, the miniature projection engine is optimized for smart phones, offering low power consumption and built-in support for mobile industry processor interface (MIPI) to ensure swift and easy integration.

With today’s advanced smart phones, people carry huge amounts of movie clips and photos in their pockets, yet find it difficult sharing it with others due to the tiny display. Adding projection capabilities into the mobile devices will enable users to easily share their media with others in any place, on any surface, at any time, the companies say.

"People want to share their media with others and enjoy the option of expanding their display even for their own personal viewing," said Benedetto Vigna, Group VP and GM, MEMS, Sensor and High-Performance Analog Division, STMicroelectronics. "ST selected bTendo’s technology due to its small size, low power and focus-free features, which are all critical for embedded projection modules. ST has a long history in the development of innovative technologies and this joint cooperation will further extend our MEMS sensor expertise, while also complementing and reinforcing our leadership in MEMS gyroscopes and accelerometers for advanced user interfaces."

"We are very excited to collaborate with STMicroelectronics, the world leader in MEMS technologies for mobile handsets, to bring to market our cutting-edge technology for embedded Pico Projectors," said Dana Gross, CEO of bTendo Ltd. "ST’s best-in-class semiconductor process technology and design capabilities will enable a cost-effective, low-power solution perfect for personal consumer devices."

A demo of the technology will be shown at Mobile World Congress in Barcelona, Feb 14-17, 2011 on the STMicroelectronics stand (7A106).

STMicroelectronics serves customers across the spectrum of electronics applications with innovative semiconductor solutions. Further information on ST can be found at www.st.com.

bTendo is a developer of personal projection technologies and solutions. For more information www.btendo.com

Also read: Introduction to MEMS gyroscopes by Jay Esfandyari, Roberto De Nuccio, Gang Xu, STMicroelectronics

Follow Small Times on Twitter.com by clicking www.twitter.com/smalltimes. Or join our Facebook group