LEDs

LEDS ARTICLES



North American semiconductor equipment industry posts December 2014 book-to-bill ratio of 0.98

01/26/2015  North America-based manufacturers of semiconductor equipment posted $1.37 billion in orders worldwide in December 2014 (three-month average basis) and a book-to-bill ratio of 0.98, according to the December EMDS Book-to-Bill Report published today by SEMI.

Self-assembled nanotextures create antireflective surface on silicon solar cells

01/23/2015  Scientists at the U.S. Department of Energy's Brookhaven National Laboratory show that etching a nanoscale texture onto the silicon material itself creates an antireflective surface that works as well as state-of-the-art thin-film multilayer coatings.

Scientists 'bend' elastic waves with new metamaterials that could have commercial applications

01/23/2015  Engineering researchers at the University of Missouri have developed a material that has the ability to control these waves, creating possible medical, military and commercial applications with the potential to greatly benefit society.

Will new policy in China trigger big changes?

01/21/2015  In June 2014, the State Council of China issued the "National Guideline for the Development and Promotion of the IC Industry,” to support the domestic semiconductor industry. The document addresses development targets, approaches, and measures.

Ten lighting and LED trends to watch in 2015

01/20/2015  The recent restructuring by major global lighting companies will allow LED makers to raise capital for investments in 2015.

2015 outlook: Tech trends and drivers

01/20/2015  Leading industry experts provide their perspectives on what to expect in 2015. 3D devices and 3D integration, rising process complexity and “big data” are among the hot topics.

Solving an organic semiconductor mystery

01/16/2015  Berkeley Lab researchers uncover hidden structures in domain interfaces that hamper performance.

SAMCO announces MOCVD demonstration availability for the GaN-550 MOCVD system

01/15/2015  SAMCO has announced MOCVD demonstration capability on a new gallium nitride (GaN-on-Si) system, the GaN-550, from Valence Process Equipment Inc.

Further growth seen for semiconductor equipment and materials at SEMI ISS 2015

01/14/2015  The SEMI Industry Strategy Symposium (ISS) opened yesterday with the theme “Riding the Wave of Silicon Magic.”

JEOL and UC Irvine partner to develop electron microscopy and materials research center

01/14/2015  JEOL USA and the University of California's Irvine Materials Research Institute (IMRI) have entered into a strategic partnership to create a premier electron microscopy and materials science research facility.

SUNY Board appoints Dr. Alain Kaloyeros as founding president of SUNY Polytechnic Institute

01/14/2015  SUNY Polytechnic Institute (SUNY Poly) yesterday announced the SUNY Board of Trustees has appointed Dr. Alain Kaloyeros as the founding President of SUNY Poly.

Zinc oxide materials tapped for tiny energy harvesting devices

01/13/2015  New research helps pave the way toward highly energy-efficient zinc oxide-based micro energy harvesting devices with applications in portable communications, healthcare and environmental monitoring, and more.

MagnaChip offers automotive semiconductor manufacturing process technology

01/13/2015  MagnaChip Semiconductor Corporation, a Korea-based designer and manufacturer of analog and mixed-signal semiconductor products announced today that it has started to offer 0.18um automotive qualified process technology to foundry customers focused on high reliability automotive semiconductor applications.

IHS identifies technologies to transform the world over next five years

01/12/2015  The Internet of Everything, cloud computing/big data and 3-D printing are the three technologies most likely to transform the world during the next five years, according to IHS Technology.

New secondary fab equipment market report available from SEMI

01/09/2015  With new cost-sensitive semiconductor devices driving capacity demand, 200mm wafer size and currently existing (legacy) fabs are seeing a renaissance, SEMI completed a thorough study of the secondary fab equipment market to identify the market size and to capture key trends and issues impacting this industry segment.

GLOBALFOUNDRIES and Linear Dimensions to offer joint analog solution for wearables and MEMs sensors markets

01/09/2015  GLOBALFOUNDRIES and Linear Dimensions Semiconductor Inc. today announced that they are working together to manufacture a 14-channel programmable reference from Linear Dimensions for multiple markets including IoT (Internet of Things) sensor and wearable device applications.

Shedding light on why blue LEDS are so tricky to make

01/08/2015  Scientists at UCL, in collaboration with groups at the University of Bath and the Daresbury Laboratory, have uncovered the mystery of why blue light-emitting diodes (LEDs) are so difficult to make, by revealing the complex properties of their main component - gallium nitride - using sophisticated computer simulations.

SEMICON West 2015: “Call for Papers” for Semiconductor Technology Symposium and TechXPOTs

01/07/2015  SEMI today announced a “Call for Papers” for SEMICON West, North America’s premier microelectronics event, to be held July 14-16 at the Moscone Center in San Francisco, Calif.

Spotlight on MEMS: SEMI launches new European MEMS Summit

01/07/2015  SEMI today announced the launch of the European MEMS Summit, to be held on 17-18 September 2015 in Milan, Italy.

HLMC develops specialty technology in pursuit of growing IoT market

01/05/2015  Chinese IC manufacturer Shanghai Huali Microelectronics Corporation gave a presentation on its outlook for the Internet of Things (IoT) market and the wide application of its specialty technology at the 2014 China Semiconductor Industry Association IC Design Branch Annual Conference ("ICCAD"), which was recently held at Hong Kong Science Park.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts