Packaging and Testing

PACKAGING AND TESTING ARTICLES



ClassOne enters ECD lab partnership with Shanghai Sinyang

04/14/2015  Semiconductor equipment manufacturer ClassOne Technology announced today that it has signed a joint electrochemical deposition (ECD) applications lab agreement with Shanghai Sinyang Semiconductor Materials Co., Ltd.

Sensor shipments strengthen but falling prices cut sales growth

04/10/2015  Sensor shipments are getting a big boost from the spread of embedded measurement functions for automated intelligent controls in systems and new high-volume applications, but sales growth is being pulled down significantly by price erosion in this once high-flying semiconductor marketplace.

MEMS shipments to reach 43.3B units by 2018, says Semico Research

04/09/2015  The market for MEMS has been growing at a fast rate. But growth will come as a result of a wide variety of emerging MEMS and will be driven by the growth of the Internet of Things (IoT), where MEMS devices will replace conventional sensors, and by the introduction of new sensor technologies.

Cavendish Kinetics adopts STATS ChipPAC's wafer level technology for its SmarTune RF MEMS tuners

04/07/2015  STATS ChipPAC Ltd. announced that Cavendish Kinetics, a provider of high performance RF MEMS tuning solutions for LTE smartphones and wearable devices, has adopted its advanced wafer level packaging technology

Consider packaging requirements at the beginning, not the end, of the design cycle

04/02/2015  Consider these eight issues where the packaging team should be closely involved with the circuit design team.

Apple dictates the ranking of top 10 MEMS manufacturers in 2014

03/25/2015  Apple boosted Bosch’s MEMS revenue in 2014 again as Bosch is the sole supplier of the pressure sensors added to the iPhone 6 and 6+.

2014 top MEMS players ranking: Rising of the first MEMS titan

03/24/2015  With an impressive 20 percent growth in MEMS revenue compared to 2013, and sales revenues of more than $1.2B, Robert Bosch GmbH is the clear #1.

Silicon Labs and Digi-Key challenge developer innovation with "Your IoT" design competition

03/24/2015  Silicon Labs and Digi-Key today announced an IoT design contest for pioneering developers who want to create connected "things" that will help make the world a smarter, more connected and energy-friendly place.

Light sensors market to grow 16 percent between 2013 and 2016

03/13/2015  Samsung, Apple and Chinese OEMs will drive revenue in the light sensor market to grow 16 percent between 2013 and 2016, according to a new report released today from IHS Inc.

New technology may double radio frequency data capacity

03/13/2015  Columbia engineers invent nanoscale IC that enables simultaneous transmission and reception at the same frequency in a wireless radio.

IRT Nanoelec and CMP team up to offer world’s first service for post-process 3D technologies on multi-project-wafer

03/05/2015  IRT Nanoelec, an R&D consortium focused on ICT using micro- and nanoelectronics, and CMP, which provides prototyping and low-volume production of ICs and MEMS, are launching a platform for multi-project-wafer, post-process 3D integration (3D-MPW).

Semiconductor unit shipments to exceed one trillion devices in 2017

02/26/2015  Updated forecast expects robust 8.2% average annual unit shipment growth through 2019.

Imec and Panasonic present breakthrough in CMOS-based transceivers for mm-wave radar systems

02/25/2015  Today, at the 2015 International Solid State Circuits Conference (ISSCC), imec and Panasonic presented a transceiver chip for phase-modulated continuous-wave radar at 79GHz.

MIG announces finalists for MEMS & Sensors Technology Showcase

02/19/2015  Selected from a pool of applicants, finalist companies will demo their MEMS/sensors-based applications as they vie for attendees’ votes.

GLOBALFOUNDRIES joins imec to develop innovative RF solutions for Internet of Things applications

02/17/2015  GLOBALFOUNDRIES, a provider of advanced semiconductor manufacturing technology, today announced a partnership with imec, a nanoelectronics research center, for joint research on future radio architectures and designs for highly integrated mobile devices and IoT applications.

Imec introduces new snapshot hyperspectral image sensors with mosaic filter architecture

02/04/2015  At next week’s SPIE Photonics West 2015, imec will present a new set of snapshot hyperspectral CMOS image sensors featuring spectral filter structures in a mosaic layout, processed per-pixel on 4x4 and 5x5 ‘Bayer-like’ arrays.

Fabrication of patterns with linewidths down to 1.5nm

02/03/2015  Researchers at aBeam Technologies, Lawrence Berkeley National Laboratory and Argonne National Laboratory have developed a technology to fabricate test patterns with a minimum linewidth down to 1.5nm.

2015 outlook: Tech trends and drivers

01/20/2015  Leading industry experts provide their perspectives on what to expect in 2015. 3D devices and 3D integration, rising process complexity and “big data” are among the hot topics.

Spotlight on MEMS: SEMI launches new European MEMS Summit

01/07/2015  SEMI today announced the launch of the European MEMS Summit, to be held on 17-18 September 2015 in Milan, Italy.

European 3D TSV Summit 2015: What business for 3D smart systems?

01/06/2015  SEMI Europe will ring in the New Year by holding the first major, international 3D TSV event of 2015. On January 19-21, members of the 3D TSV industry will convene in Grenoble, France for the 3rd edition of the European 3D TSV Summit.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts