Wafer Level Packaging

WAFER LEVEL PACKAGING ARTICLES



Present at coolingZONE LED 2012 in Berlin

02/23/2012 

coolingZONE LED, May 29-31 in Berlin, is soliciting technical presentations on LED energy consumption, LED packaging, heat and air-flow simulations of LED products, and related topics.

Present at ESTC 2012 in Amsterdam

02/21/2012 

Electronics System Integration Technology Conference (ESTC) 2012 seeks original papers describing research in all areas of electronic packaging, including LED packaging, flexible electronics, assembly and interconnect technologies, and more.

Amkor plans IMAPS Device Packaging keynote

02/21/2012 

The 2012 IMAPS Device Packaging Conference will take place March 6-8 in Fountain Hills, AZ, with Amkor's Dr. Robert Darveaux presenting "Escalating Challenges in Developing Complex Solutions for Next Generation Package and Interconnect Technologies."

CMOS image sensors keep pushing CCDs out of the picture

02/13/2012 

CMOS image sensors in 2011 continued to push CCD sensors into a smaller, isolated section of the market. CMOS image sensors are growing on use in mobile electronics and emerging applications, shows analyst firm IHS, and will find more adoption as back-side illumination costs come down.

European microelectronics fab database tracks major changes over past 5 years

02/13/2012 

Yole Developpement released "European Microelectronic Fabs Database & Report 2012," a database and report on the European microelectronics and microsystem manufacturing fabs, pilot lines, and major R&D organizations.

Amkor continues cost reductions with voluntary retirement in Japan

02/10/2012 

Amkor (NASDAQ:AMKR) shared that it cut costs through workforce reductions in Q4 2012, and announced a voluntary retirement program in Japan to continue this initiative.

2011 ITRS: DRAM, 3D Flash, MEMS, nano scaling steal the show

02/08/2012 

The 2011 International Technology Roadmap for Semiconductors (ITRS) has been publicly released. Several areas of advancement are highlighted in the 2011 ITRS: DRAM and Flash memory, and MEMS.

Kyocera doubles flip-chip assembly with new cleanroom in US

02/07/2012 

Kyocera America, Inc. doubled its flip chip assembly capacity for microelectronic devices with a $3.5 million Class-10,000 cleanroom, offering lead-free processes in San Diego.

STATS ChipPAC shutters Thailand semiconductor packaging plant after floods

02/01/2012 

STATS ChipPAC decided not to resume semiconductor assembly operations in its Thailand plant, owing to extensive equipment and facility damages sustained during the disastrous floods in 2011.

Apple iPhone 4S steals smartphone show in Q4 2011; Samsung wins the year

01/27/2012 

While Apple's release of the iPhone 4S in Q4 2011 "unleashed tremendous pent-up demand" from consumers, Samsung used its broad range of smartphones to take the top spot, reports IHS.

USPTO seeks nominees for National Medal of Technology and Innovation

01/24/2012 

The USPTO is looking to increase the diversity of honorees for its annual National Medal of Technology and Innovation (NMTI), honoring "this nation's creative geniuses."

Si-Ware platform creates MOEMS on-wafer with lithographic alignment

01/24/2012 

Si-Ware Systems debuted the SiMOST platform to fab and package single-chip optical systems with validated MEMS components. Multiple MOEMS structures can be patterned and etched on SOI wafers using DRIE. The structures are then wafer-level packaged and diced.

Silex devs wafer-level MEMS fab technologies for mobile devices

01/23/2012 

Silex Microsystems joined Energy-efficient Piezo-MEMS Tunable RF Front-End Antenna Systems for Mobile Devices to develop TSVs, PZT thin films, and other technologies for high-performance RF systems targeting mobile devices.

Semiconductor industry veteran takes helm at Minco Technology Labs

01/20/2012 

Minco Technology Labs, hi-rel semiconductor die processing, packaging and test provider, appointed board member Bill Bradford as president and CEO.

Samsung Electronics ramps embedded multi-chip packaging with memory products

01/19/2012 

Samsung Electronics began producing embedded multi-chip package (eMCP) memory for use in entry- to mid-level smartphones. The products use low power double-data-rate 2 (LPDDR2) 30nm DRAM and 20nm NAND flash memory.

Apple shares list of suppliers

01/13/2012 

For the first time, Apple Inc. has publicly published a list of over 150 companies that the electronics giant says represent 97% of its procurement expenditures for materials, manufacturing, and assembly of products worldwide.

Semiconductor packaging houses gain from more device complexity

01/11/2012 

Increased I/O density, power/performance reqs, and other factors are increasing use of flip chip, 2.5D and 3D technologies, a boon to packaging subcontractors. But they face a challenge from foundries, and must navigate under-utilization of wire bonding capacity.

Upcoming SMTA events: IWLPC keynote named, SMTAI seeks presenters

01/10/2012 

The SMTA released its call for presenters for SMTA International (SMTAI) 2012, October 14-18 in Orlando, FL. The association, along with Chip Scale Review magazine, also announced the keynote for the International Wafer-level Packaging Conference (IWLPC), held November 5-8, San Jose, CA.

Inari proposes acquisition of Amertron

01/10/2012 

Packaging house Inari Berhad signed an MOU to acquire Amertron Global, which operates in the Philippines and China providing microelectronics and optoelectronics manufacturing services.

STATS ChipPAC expands WLP capacity with new Singapore facility

01/05/2012 

STATS ChipPAC held the groundbreaking ceremony for a new factory in Singapore, which will enable STATS ChipPAC to expand its manufacturing capabilities for advanced wafer level technologies.




WEBCASTS



Environment, Safety & Health

Date and time TBD

The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.

Sponsored By:

Wafer Processing

Date and time TBD

As the industry moves to 10nm and 7nm nodes, advances in wafer processing – etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others – will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.

Sponsored By:

More Webcasts