Tag Archives: PCM

PCM + ReRAM = OUM as XPoint

The good people at TECHINSIGHTS have reverse-engineered an Intel “Optane” SSD to cross-section the XPoint cells within (http://www.eetimes.com/author.asp?section_id=36&doc_id=1331865&), so we have confirmation that the devices use chalcogenide glasses for both the switching layer and the selector diode. That the latter is labeled “OTS” (for Ovonic Threshold Switch) explains the confusion over the last year as to whether this device is a Phase-Change Memory (PCM) or Resistive Random Access Memory (ReRAM)…it seems to be the special variant of ReRAM using PCM material that has been branded Ovonic Unified Memory or “OUM” (https://www.researchgate.net/publication/260107322_Programming_Speed_in_Ovonic_Unified_Memory).

As a reminder, cross-bar ReRAM devices function by voltage-driven pulses creating resistance changes in some material. The cross-bars allow for reading and writing all the bits in a word-string in a manner similar to Flash arrays.

In complete contrast, Phase Change Memory (PCM) cells—as per the name—rely upon the change between crystalline and amorphous material phases to alter resistance. The standard way to change phases is with thermal energy from an integrated set of heater elements. The standard PCM architecture also requires one transistor for each memory cell in a manner similar to DRAM arrays.

Then we have the OUM variant of PCM as previously branded by Energy Conversion Devices (ECD) and affiliated shell-campanies founded by tap-dancer-extraordinaire Stanford Ovshinsky (https://en.wikipedia.org/wiki/Stanford_R._Ovshinsky). So-called “Ovonic” PCM cells see phase-changes driven by voltage pulses without separate heater elements, such that from a circuit architecture perspective they are cross-bar ReRAMs.

Ovshinsky et al. successfully sold this technology to industry many times. In 2000, it was licensed to STMicroelectronics. Also in 2000, it was used to launch Ovonyx with Intel investment (http://www.eetimes.com/document.asp?doc_id=1176621), at which time Intel said the technology would take a long time to commercialize. In 2005 Intel re-invested (http://www.businesswire.com/news/home/20051019005145/en/Ovonyx-Receives-Additional-Investment-Intel-Capital). Finally in 2009, Intel and Numonyx showed a functional 64Mb XPoint test chip at IEDM (http://www.eetimes.com/document.asp?doc_id=1176621).

In 2007, Ovonxyx licensed it to Hynix (http://www.eetimes.com/document.asp?doc_id=1167173), and Qimonda (https://www.design-reuse.com/news/15022/ovonyx-qimonda-sign-technology-licensing-agreement-phase-change-memory.html), and others. All of those license obligations were absorbed by Micron when acquiring Ovonyx (https://seekingalpha.com/article/3774746-micron-tainted-love). ECD is still in bankruptcy (http://www.kccllc.net/ecd/document/list/3153).

So, years of R&D and JVs are behind the XPoint Optane(TM) SSDs. They are cross-bar architecture ReRAM arrays of PCM materials, and had the term not been ruined by 17-years of over-promising and under-delivering they would likely have been called OUM chips. Many others tried and failed, but Intel/Micron finally figured out how to make commercial gigabit-scale cross-bar NVMs using OUM arrays. Now they just have to yield the profits…

—E.K.

3D XPoint uses PCM Material in ReRAM Device

IM Flash pre-announced “3D XPoint”(TM) memory for release later this year, and lack of details has led to widespread confusion regarding what it is. EETimes has reported that, “Chalcogenide material and an Ovonyx switch are magic parts of this technology with the original work starting back in the 1960’s,” said Guy Blalock, co-CEO of IM Flash at the 2016 Industry Strategy Symposium hosted by the SEMI trade group. However, contradicting industry terminology conventions, in another article EETimes reported that a spokesperson for Intel has said that, “3D XPoint should not be described as ReRAM.”
First promoted by the master of materials solutions-looking-for-problems Sanford Ovshinsky under the name “Ovonic” trademark, chalcogenide materials form glassy structures with meta-stable properties. With proper application of heat and electrical current, chalcogenides can be made to switch between low-resistivity crystalline and high-resistivity amorphous phases to create Phase-Change Memory (PCM) arrays in silicon circuit architectures. Chalcogenides can also function as the matrix for the diffusion of silver ions in a cross-point device architecture to create a digital “Resistive RAM” (or “ReRAM” or “RRAM”), or create an analog memristor for neuromorphic applications as explored by Prof. Kris Campbell of Boise State in collaboration with Knowm.

Hitachi and Renesas Technology developed Phase-Change Memory (PCM) cell technology employing Ta2O5 interfacial layer to enable low-power operation. (Source: Hitachi)

Hitachi and Renesas Technology developed Phase-Change Memory (PCM) cell technology employing Ta2O5 interfacial layer to enable low-power operation. (Source: Hitachi)

The Figure shows a schematic cross-section of a typical PCM cell. From a scientific perspective, we could say that any memory cell that relies upon a change in material phase to encode digital data should be termed a PCM. However, due to the history of this specific type of PCM device being the only architecture explored for decades (and commercialized for limited niche sub-markets), and due to the fundamentally different circuit architectures, it is reasonable to categorically deny that any cross-point device is a “PCM.”
However, any cross-point memory device based on a resistance change has to be a ReRAM regardless of the switching phenomenon:  phase-change, filament-growth, ion-diffusion, etc. So we could say that this new chip uses PCM material in a ReRAM device.
—E.K.