|
|
WEBCASTS
 Environment, Safety & Health Date and time TBD The semiconductor industry is an acknowledged global leader in promoting environmental sustainability in the design, manufacture, and use of its products, as well as the health and safety of its operations and impacts on workers in semiconductor facilities (fabs). We will examine trends and concerns related to emissions, chemical use, energy consumption and worker safety and health.
Sponsored By:
Wafer Processing Date and time TBD As the industry moves to 10nm and 7nm nodes, advances in wafer processing etch, deposition, planarization, implant, cleaning, annealing, epitaxy among others will be required. Manufacturers are looking for new solutions for sustained strain engineering, FinFETs, FDSOI and multi-gate technologies, 3D NAND, and high mobility transistors.
Sponsored By:
More Webcasts
|
DEK has launched ProActiv process technology to enable electronics manufacturers to print pastes with high-density heterogeneous PCBs and ultra fine pitch assemblies such as advanced package assembly.
Picotest released a new family of Signal Injectors, or adapters, to improve voltage regulator, LDO, and power supply testing accuracy. Increased bandwidth and higher resolution measurements are enabled for PSRR, stability, crosstalk, reverse transfer, input impedance, Bode plots, and crosstalk tests along with non-invasive ICT for load transients, stability and output impedance.
RJR Polymers debuted a new-generation LCP quad flat-pack no-lead (QFN), air-cavity package that will support finer lead pitches, thinner leadframes and shorter wire bond lengths in a near hermetic, ROHS-compliant solution.
Jeff Schake, et al, DEK Printing Machines, discuss the flatness characteristics of available wafer pallets, and use them in an experiment with thinned wafers in automated printing. With thin wafers, and the requirement for low coating thickness, the wafer-support tooling surface metrology should have an appreciable impact on coating thickness control.